component
FT231XS-R
Public Made by Adomby adom
FTDI USB ICs, SSOP-20-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
FT231XS-R
FTDI · USB ICs · SSOP-20-150mil
FT231XS-R from FTDI, in a SSOP-20-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DTR# | output | Data Terminal Ready control output / handshake signal (active low). |
| 2 | RTS# | output | Request to Send control output / handshake signal (active low). |
| 3 | VCCIO | power_in | 1V8 to 3V3 supply for the IO cells. |
| 4 | RXD | input | Receive asynchronous data input for the UART. |
| 5 | RI# | input | Ring Indicator input for remote wake up (active low). |
| 6 | GND | power_in | 0V ground input. |
| 7 | DSR# | input | Data Set Ready control input / handshake signal (active low). |
| 8 | DCD# | input | Data Carrier Detect control input (active low). |
| 9 | CTS# | input | Clear To Send control input / handshake signal (active low). |
| 10 | CBUS2 | bidirectional | Configurable CBUS I/O pin whose function is set in the MTP memory; default is TXLED#, and it can be set to any option in Table 3.7. Inputs are pulled to VCCIO via approx. 75kΩ. |
| 11 | USBDP | input | USB Data Signal Plus. |
| 12 | USBDM | input | USB Data Signal Minus. |
| 13 | 3V3OUT | power_out | 3V3 output at 50mA that may be used to power VCCIO; when VCC is 3V3 this pin is an input and must be driven with 3V3. |
| 14 | RESET# | input | Reset input (active low). |
| 15 | VCC | power_in | 5 V or 3V3 supply to the IC; if VCC is 3V3, 3V3OUT must also be driven with a 3V3 input. |
| 16 | GND | power_in | 0V ground input. |
| 17 | CBUS1 | bidirectional | Configurable CBUS I/O pin whose function is set in the MTP memory; default is RXLED#, and it can be set to any option in Table 3.7. Inputs are pulled to VCCIO via approx. 75kΩ. |
| 18 | CBUS0 | bidirectional | Configurable CBUS I/O pin whose function is set in the MTP memory; default is TXDEN, and it can be set to any option in Table 3.7. Inputs are pulled to VCCIO via approx. 75kΩ. |
| 19 | CBUS3 | bidirectional | Configurable CBUS I/O pin whose function is set in the MTP memory; default is SLEEP#, and it can be set to any option in Table 3.7. Inputs are pulled to VCCIO via approx. 75kΩ. |
| 20 | TXD | output | Transmit asynchronous data output for the UART. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FTDI |
| Package | SSOP-20-150mil |
| Category | Interface ICs |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | -65 | 150 | Degrees C | 16 | |||
| Ambient Operating Temperature (Power Applied) | -40 | 85 | Degrees C | Power applied | 16 | ||
| VCC Supply Voltage | VCC | -0.3 | 5.5 | V | 16 | ||
| VCCIO IO Voltage | VCCIO | -0.3 | 4 | V | 16 | ||
| DC Input Voltage, USBDP and USBDM | -0.5 | 3.63 | V | 16 | |||
| DC Input Voltage, High Impedance Bi-directionals (powered from VCCIO) | -0.3 | 5.8 | V | Powered from VCCIO | 16 | ||
| DC Output Current, Outputs | 22 | mA | 16 | ||||
| ESD Human Body Mode (HBM) | -2 | 2 | kV | Table 5.2 threshold printed as > ±2kV | 16 | ||
| ESD Machine Mode (MM) | -200 | 200 | V | Table 5.2 threshold printed as > ±200V | 16 | ||
| ESD Charged Device Mode (CDM) | -500 | 500 | V | Table 5.2 threshold printed as > ±500V | 16 | ||
| Latch-up | -200 | 200 | mA | Table 5.2 threshold printed as > ±200mA | 16 | ||
| VCC Operating Supply Voltage | VCC | 2.97 | 5 | 5.5 | V | Normal Operation | 17 |
| VCCIO Operating Supply Voltage | VCCIO | 1.62 | 3.63 | V | 17 | ||
| Operating Supply Current (Icc1) | Icc1 | 8 | 8 | 8.4 | mA | Normal Operation | 17 |
| 3.3V regulator output | 3V3 | 2.97 | 3.3 | 3.63 | V | 17 | |
| Voh Output Voltage High (VCCIO=+3.3V, drive 4mA) | Voh | 2.97 | V | VCCIO = +3.3V; Ioh = +/-2mA; I/O drive strength = 4mA | 18 | ||
| Voh Output Voltage High (VCCIO=+3.3V, drive 8mA) | Voh | 2.97 | V | VCCIO = +3.3V; I/O drive strength = 8mA | 18 | ||
| Voh Output Voltage High (VCCIO=+3.3V, drive 12mA) | Voh | 2.97 | V | VCCIO = +3.3V; I/O drive strength = 12mA | 18 | ||
| Voh Output Voltage High (VCCIO=+3.3V, drive 16mA) | Voh | 2.97 | V | VCCIO = +3.3V; I/O drive strength = 16mA | 18 | ||
| Vol Output Voltage Low (VCCIO=+3.3V, drive 4mA) | Vol | 0 | 0.4 | V | VCCIO = +3.3V; Iol = +/-2mA; I/O drive strength = 4mA | 18 | |
| Vol Output Voltage Low (VCCIO=+3.3V, drive 8mA) | Vol | 0 | 0.4 | V | VCCIO = +3.3V; I/O drive strength = 8mA | 18 | |
| Vol Output Voltage Low (VCCIO=+3.3V, drive 12mA) | Vol | 0 | 0.4 | V | VCCIO = +3.3V; I/O drive strength = 12mA | 18 | |
| Vol Output Voltage Low (VCCIO=+3.3V, drive 16mA) | Vol | 0 | 0.4 | V | VCCIO = +3.3V; I/O drive strength = 16mA | 18 | |
| Vil Input low Switching Threshold (VCCIO=+3.3V) | Vil | 0.8 | V | LVTTL | 18 | ||
| Vih Input High Switching Threshold (VCCIO=+3.3V) | Vih | 2 | V | LVTTL | 18 | ||
| Input pull-up resistance (VCCIO=+3.3V) | Rpu | 40 | 75 | 190 | KΩ | Vin = 0 | 18 |
| Input pull-down resistance (VCCIO=+3.3V) | Rpd | 40 | 75 | 190 | KΩ | Vin =VCCIO | 18 |
| Input Leakage Current (VCCIO=+3.3V) | Iin | -10 | 10 | μA | Vin = 0 | 18 | |
| Tri-state output leakage current (VCCIO=+3.3V) | Ioz | -10 | 10 | μA | Vin = 5.5V or 0 | 18 | |
| USB I/O Output Voltage Low (USBDP, USBDM) | Vol | 0.2 | V | 21 | |||
| USB I/O Input low Switching Threshold (USBDP, USBDM) | Vil | 0.8 | V | 21 | |||
| USB I/O Input High Switching Threshold (USBDP, USBDM) | Vih | 2 | V | 21 | |||
| Frequency of Operation (internal clock) | 11.98 | 12 | 12.02 | MHz | 21 | ||
| Clock Period (internal clock) | 83.19 | 83.33 | 83.47 | ns | 21 | ||
| Duty Cycle (internal clock) | 45 | 50 | 55 | % | 21 | ||
| Operating Supply Current (Icc2) | Icc2 | 125 | μA | USB Suspend | 17 | ||
| Switching Threshold (VCCIO=+3.3V) | Vt | 1.49 | V | LVTTL | 18 | ||
| Schmitt trigger negative going threshold voltage (VCCIO=+3.3V) | Vt- | 1.15 | V | 18 | |||
| Schmitt trigger positive going threshold voltage (VCCIO=+3.3V) | Vt+ | 1.64 | V | 18 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | ESD Human Body Mode (HDM) 2000 V Class 2 Table 5.1 Absolute Maximum Ratings | 16 |
CAD (KiCad official)
- Symbol:
FT231XS-R - Footprint:
Package_SO:SSOP-20_3.9x8.7mm_P0.635mm - 3D model: SSOP-20-150mil (KiCad packages3D, STEP)
- 3D model files:
ft231xs-r-etched.step/ft231xs-r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ft231xs-r.step/ft231xs-r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FTDI datasheet (44 pp, sha256
8999a05c9ad906a0, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).