3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLD8526PGL
Leadtrend Tech · AC-DC Controllers & Regulators · SOT-26
LD8526PGL from Leadtrend Tech, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DRV | output | Driving pin connected to the MOSFET gate directly or through a resistor, with output high of 4.4 to 4.7 V at Io=+10 mA and output low of 0.5 V max at Io=-10 mA. |
| 2 | GND | power_in | Ground pin for the controller. |
| 3 | VCC | power_in | Supply voltage pin with recommended operating range of 3 V to 6 V, UVLO turn-on at 3 V and turn-off at 2.8 V, absolute maximum -0.3 V to 7 V, and a VCC capacitor of 2.2 µF required from VCC to GND. |
| 4 | DET | input | Synchronous rectification detection pin with turn-on threshold VDET_ON of -400 to -150 mV and turn-off threshold VDET_OFF of 10 to 30 mV, absolute range -1 V to 200 V. |
| 5 | HVR | power_in | HV linear regulator input, connected to the SR MOSFET drain, with absolute maximum range -1 V to 200 V. |
| 6 | VIN | power_in | External supply input with recommended supply voltage up to 24 V and absolute maximum range -0.3 V to 30 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Leadtrend Tech |
| Package | SOT-26 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Junction Temperature | -40 | 125 | C | 5 | |||
| Supply Voltage VIN | VIN | 24 | V | 5 | |||
| Supply Voltage VCC | VCC | 3 | 6 | V | 5 | ||
| Power MOS Gate Threshold Voltage | 1.5 | 4 | V | 5 | |||
| Operating Frequency | 130 | KHz | 5 | ||||
| VCC capacitor | 2.2 | F | 5 | ||||
| MOSFET Ciss (1) | Ciss | 1000 | 5500 | pF | Note 1: when Ciss is max, turn-off RGATE must be min | 5 | |
| Turn-Off Rgate (1) | RGATE | 0 | 5 | Ω | Note 1: when Ciss is min, turn-off RGATE must be max | 5 | |
| RDET | RDET | 600 | Ω | 5 | |||
| DET pin voltage | DET | -1 | 200 | V | 5 | ||
| HVR pin voltage | HVR | -1 | 200 | V | 5 | ||
| VIN pin voltage | VIN | -0.3 | 30 | V | 5 | ||
| VCC pin voltage | VCC | -0.3 | 7 | V | 5 | ||
| DRV pin voltage | DRV | -0.3 | V | Upper limit printed as VCC+0.3V | 5 | ||
| Maximum Junction Temperature | 150 | C | 5 | ||||
| Storage Temperature Range | -65 | 150 | C | 5 | |||
| Power Dissipation (SOT-26) | 200 | mW | Ambient temperature 85C | 5 | |||
| Lead temperature | 260 | C | Soldering, 10 sec | 5 | |||
| ESD Voltage Protection, Human Body Model (except DET/HVR Pin) | 2.5 | KV | 5 | ||||
| ESD Voltage Protection, Human Body Model (DET/HVR Pin) | 1 | KV | 5 | ||||
| ESD Voltage Protection, Machine Model | 250 | V | 5 | ||||
| Charge current, HVR | ICHG_HVR1 | 20 | 35 | 50 | mA | HVR=30V, VCC=3.5V | 6 |
| Charge current, HVR | ICHG_HVR2 | 10 | 20 | 30 | mA | HVR=12V, VCC=3.5V | 6 |
| HVR leakage current | IHVR_LK | 50 | µA | VHVR=200V | 6 | ||
| VIN charge current | ICHG_VIN | 15 | 38 | 50 | mA | VIN=12V, VCC=3.5V | 6 |
| UVLO (on) | VCC_ON | 2.8 | 3 | 3.2 | V | 6 | |
| VCC Operating Voltage | VVCC_H1 | 4.5 | 5.8 | 6.8 | V | HVR=12V | 6 |
| VCC Operating Voltage | VVCC_H2 | 4.5 | 6 | 6.8 | V | VIN=12V | 6 |
| Operating Current | IVCC_OP1 | 2.2 | 3 | mA | Vcc=5V, DET=65kHz, 4.7nF on GATE pin | 6 | |
| Operating Current, Green mode | IVCC_OP2 | 200 | 250 | µA | Green mode | 6 | |
| Operating Current, UVLO_OFF mode | IVCC_OFF | 25 | µA | UVLO_OFF mode, VCC=2.5v | 6 | ||
| Turn-on voltage | VDET_ON | -400 | -300 | -150 | mV | 6 | |
| Turn-off voltage | VDET_OFF | 10 | 20 | 30 | mV | Note 3: RDET must be adjusted from 600R down in CCM | 6 |
| Turn-off compensation current | IDET_OFF | 85 | 100 | 115 | µA | 6 | |
| Ring Reject Threshold | VDET_R | 1.3 | 1.6 | 1.8 | V | 6 | |
| Ring Reject Window | TDET_WD | 50 | 70 | 100 | ns | 6 | |
| DET leakage current | IDET_LK | 1 | µA | VDET=200V | 6 | ||
| Max. Operating Limit | FSW_MAX | 150 | 180 | 220 | kHz | Note 1: guaranteed by design | 6 |
| Total Turn-on delay time | TD_ON | 65 | ns | Note 2: load capacitance=4.7nF | 7 | ||
| Total Turn-off delay time | TD_OFF | 25 | ns | Note 2: load capacitance=4.7nF | 7 | ||
| Pseudo dead time | TPDT | 4 | 5 | 6 | µs | 7 | |
| Output High Voltage | VDRV_H | 4.4 | 4.7 | V | Io=+10mA | 7 | |
| Output Low Voltage | VDRV_L | 0.5 | V | Io=-10mA | 7 | ||
| Turn-off propagation delay | Tp | 15 | ns | 7 | |||
| Turn-on Rising time | Tr | 75 | 150 | ns | Note 2; drive voltage from 20%(1V) to 80%(4V) | 7 | |
| Turn-off Falling time | Tf | 13 | 30 | ns | Note 2; drive voltage from 80%(4V) to 20%(1V) | 7 | |
| Minimum On Time (LD8526P) | TMIN_ON | 0.2 | 0.5 | 0.8 | µs | 7 | |
| Minimum Off Time (LD8526P) | TMIN_OFF | 0.1 | 0.3 | 0.5 | µs | 7 | |
| UVLO (off) | VCC_OFF | 2.8 | V | 6 | |||
| UVLO Hysteresis | VCC_HYS | 0.2 | V | 6 | |||
| Ring Reject Threshold Hysteresis | VDET_RHY | 1.1 | V | 6 | |||
| OTP Level | TOTP | 150 | C | Note 1: guaranteed by design | 7 | ||
| OTP Hysteresis | TOTP_HYS | 30 | C | Note 1: guaranteed by design | 7 | ||
| Package Thermal Resistance (SOT-26) | 200 | C/W | SOT-26 package | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LD8526PGL - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-26, generated on the KiCad land (body 1.6 x 2.896 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ld8526pgl-etched.step/ld8526pgl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld8526pgl.step/ld8526pgl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Leadtrend Tech datasheet (14 pp, sha256
3ab9710958c8c10b, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).