main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ld8526pgl: viewers rendered from the public page · Ray
ld8526pgl-etched.glb ld8526pgl: factory component page (tier=lcsc) · Ray
ld8526pgl-etched.step ld8526pgl: factory component page (tier=lcsc) · Ray
ld8526pgl-hero.glb ld8526pgl: hero GLB from the etched model (keeps the MPN mark) · Ray
ld8526pgl-hero.overlay.json ld8526pgl: hero GLB from the etched model (keeps the MPN mark) · Ray
ld8526pgl.glb Publish 0.1.0 · Ray
ld8526pgl.kicad_mod Publish 0.1.0 · Ray
ld8526pgl.kicad_sym Publish 0.1.0 · Ray
ld8526pgl.lbr Publish 0.1.0 · Ray
ld8526pgl.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 6 pins · Ray

LD8526PGL

Leadtrend Tech · AC-DC Controllers & Regulators · SOT-26

LD8526PGL from Leadtrend Tech, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 DRV output Driving pin connected to the MOSFET gate directly or through a resistor, with output high of 4.4 to 4.7 V at Io=+10 mA and output low of 0.5 V max at Io=-10 mA.
2 GND power_in Ground pin for the controller.
3 VCC power_in Supply voltage pin with recommended operating range of 3 V to 6 V, UVLO turn-on at 3 V and turn-off at 2.8 V, absolute maximum -0.3 V to 7 V, and a VCC capacitor of 2.2 µF required from VCC to GND.
4 DET input Synchronous rectification detection pin with turn-on threshold VDET_ON of -400 to -150 mV and turn-off threshold VDET_OFF of 10 to 30 mV, absolute range -1 V to 200 V.
5 HVR power_in HV linear regulator input, connected to the SR MOSFET drain, with absolute maximum range -1 V to 200 V.
6 VIN power_in External supply input with recommended supply voltage up to 24 V and absolute maximum range -0.3 V to 30 V.

Key specifications

Parameter Value
Manufacturer Leadtrend Tech
Package SOT-26
Category Power Management ICs
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Junction Temperature -40 125 C 5
Supply Voltage VIN VIN 24 V 5
Supply Voltage VCC VCC 3 6 V 5
Power MOS Gate Threshold Voltage 1.5 4 V 5
Operating Frequency 130 KHz 5
VCC capacitor 2.2 F 5
MOSFET Ciss (1) Ciss 1000 5500 pF Note 1: when Ciss is max, turn-off RGATE must be min 5
Turn-Off Rgate (1) RGATE 0 5 Ω Note 1: when Ciss is min, turn-off RGATE must be max 5
RDET RDET 600 Ω 5
DET pin voltage DET -1 200 V 5
HVR pin voltage HVR -1 200 V 5
VIN pin voltage VIN -0.3 30 V 5
VCC pin voltage VCC -0.3 7 V 5
DRV pin voltage DRV -0.3 V Upper limit printed as VCC+0.3V 5
Maximum Junction Temperature 150 C 5
Storage Temperature Range -65 150 C 5
Power Dissipation (SOT-26) 200 mW Ambient temperature 85C 5
Lead temperature 260 C Soldering, 10 sec 5
ESD Voltage Protection, Human Body Model (except DET/HVR Pin) 2.5 KV 5
ESD Voltage Protection, Human Body Model (DET/HVR Pin) 1 KV 5
ESD Voltage Protection, Machine Model 250 V 5
Charge current, HVR ICHG_HVR1 20 35 50 mA HVR=30V, VCC=3.5V 6
Charge current, HVR ICHG_HVR2 10 20 30 mA HVR=12V, VCC=3.5V 6
HVR leakage current IHVR_LK 50 µA VHVR=200V 6
VIN charge current ICHG_VIN 15 38 50 mA VIN=12V, VCC=3.5V 6
UVLO (on) VCC_ON 2.8 3 3.2 V 6
VCC Operating Voltage VVCC_H1 4.5 5.8 6.8 V HVR=12V 6
VCC Operating Voltage VVCC_H2 4.5 6 6.8 V VIN=12V 6
Operating Current IVCC_OP1 2.2 3 mA Vcc=5V, DET=65kHz, 4.7nF on GATE pin 6
Operating Current, Green mode IVCC_OP2 200 250 µA Green mode 6
Operating Current, UVLO_OFF mode IVCC_OFF 25 µA UVLO_OFF mode, VCC=2.5v 6
Turn-on voltage VDET_ON -400 -300 -150 mV 6
Turn-off voltage VDET_OFF 10 20 30 mV Note 3: RDET must be adjusted from 600R down in CCM 6
Turn-off compensation current IDET_OFF 85 100 115 µA 6
Ring Reject Threshold VDET_R 1.3 1.6 1.8 V 6
Ring Reject Window TDET_WD 50 70 100 ns 6
DET leakage current IDET_LK 1 µA VDET=200V 6
Max. Operating Limit FSW_MAX 150 180 220 kHz Note 1: guaranteed by design 6
Total Turn-on delay time TD_ON 65 ns Note 2: load capacitance=4.7nF 7
Total Turn-off delay time TD_OFF 25 ns Note 2: load capacitance=4.7nF 7
Pseudo dead time TPDT 4 5 6 µs 7
Output High Voltage VDRV_H 4.4 4.7 V Io=+10mA 7
Output Low Voltage VDRV_L 0.5 V Io=-10mA 7
Turn-off propagation delay Tp 15 ns 7
Turn-on Rising time Tr 75 150 ns Note 2; drive voltage from 20%(1V) to 80%(4V) 7
Turn-off Falling time Tf 13 30 ns Note 2; drive voltage from 80%(4V) to 20%(1V) 7
Minimum On Time (LD8526P) TMIN_ON 0.2 0.5 0.8 µs 7
Minimum Off Time (LD8526P) TMIN_OFF 0.1 0.3 0.5 µs 7
UVLO (off) VCC_OFF 2.8 V 6
UVLO Hysteresis VCC_HYS 0.2 V 6
Ring Reject Threshold Hysteresis VDET_RHY 1.1 V 6
OTP Level TOTP 150 C Note 1: guaranteed by design 7
OTP Hysteresis TOTP_HYS 30 C Note 1: guaranteed by design 7
Package Thermal Resistance (SOT-26) 200 C/W SOT-26 package 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LD8526PGL
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-26, generated on the KiCad land (body 1.6 x 2.896 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ld8526pgl-etched.step / ld8526pgl-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ld8526pgl.step / ld8526pgl.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Leadtrend Tech datasheet (14 pp, sha256 3ab9710958c8c10b, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF