Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TM1931

TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-24

TM1931 from TM(Shenzhen Titan Micro Elec), in a SOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDB input Hardware shutdown input; the chip stops working when it is pulled low.
2 OUT18 output Constant-current output channel 18, set by the R_EXT resistor with a maximum of 38mA.
3 R_EXT input Constant-current feedback pin; a resistor to ground sets the output current (recommended minimum 2kΩ, pin voltage typically 1.3V).
4 VCC power_in Positive supply, 2.7V to 5.5V.
5 GND power_in Power ground (negative supply).
6 SDA bidirectional I2C data line (open drain, pulled up externally, typically 4.7kΩ), up to 400kHz clock operation.
7 SCL input I2C clock input, maximum frequency 400kHz.
8 OUT1 output Constant-current output channel 1 with independent PWM control.
9 OUT2 output Constant-current output channel 2 with independent PWM control.
10 OUT3 output Constant-current output channel 3 with independent PWM control.
11 OUT4 output Constant-current output channel 4 with independent PWM control.
12 OUT5 output Constant-current output channel 5 with independent PWM control.
13 OUT6 output Constant-current output channel 6 with independent PWM control.
14 OUT7 output Constant-current output channel 7 with independent PWM control.
15 OUT8 output Constant-current output channel 8 with independent PWM control.
16 OUT9 output Constant-current output channel 9 with independent PWM control.
17 OUT10 output Constant-current output channel 10 with independent PWM control.
18 OUT11 output Constant-current output channel 11 with independent PWM control.
19 OUT12 output Constant-current output channel 12 with independent PWM control.
20 OUT13 output Constant-current output channel 13 with independent PWM control.
21 OUT14 output Constant-current output channel 14 with independent PWM control.
22 OUT15 output Constant-current output channel 15 with independent PWM control.
23 OUT16 output Constant-current output channel 16 with independent PWM control.
24 OUT17 output Constant-current output channel 17 with independent PWM control.

Key specifications

Parameter Value
Manufacturer TM(Shenzhen Titan Micro Elec)
Package SOP-24
Category Nixie Tube Driver/LED Driver
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage Vdd -0.3 6 V 2
SCL, SDA, SDB voltage Vin -0.3 V max Vcc+0.3 V 2
Maximum junction temperature TMAX 150 ℃ 2
Storage temperature range TSTG -65 150 ℃ 2
Operating temperature range TA -40 85 ℃ 2
ESD (HBM) 4 kV 2
Supply voltage Vdd 2.7 5.5 V 3
Maximum output current IMAX 38 mA Vcc=4.2V, Vout=0.8V, REXT=2kΩ (note 1) 3
Quiescent supply current Icc 5.25 mA REXT=3.3kΩ 3
Shutdown current IDD(ssd) 3.1 uA VSDB=0V, or soft shutdown 3
Output leakage current Ioh 1 uA VSDB=0V, or soft shutdown; Voh=5V 3
R_EXT pin output voltage VEXT 1.3 V 3
Logic 0 input voltage VIL 0.4 V Vcc=2.7V 3
Logic 1 input voltage VIL 1.4 V Vcc=5.5V 3
Logic 0 input current VIL 5 nA note 2 (design guaranteed) 3
Logic 1 input current VIL 5 nA note 2 (design guaranteed) 3
Serial clock frequency fSCL 400 kHZ 3
Bus free time between STOP and START tBUF 1.3 μ s 3
(Repeated) START hold time tHD,STA 0.6 μ s 3
Repeated START setup time tSU,STA 0.6 μ s 3
STOP setup time tSU,STO 0.6 μ s 3
Data hold time tHD,DAT 0.9 μ s 3
Data setup time tSU,DAT 100 ns 3
SCL low period tLOW 1.3 μ s 3
SCL high period tHIGH 0.7 μ s 3
SDA and SCL rise time tR 300 ns note 3: Cb=bus capacitance (pF), minimum 20+0.1Cb, ISINK≤6mA 3
SDA and SCL fall time tF 300 ns note 3: Cb=bus capacitance (pF), minimum 20+0.1Cb, ISINK≤6mA 3

CAD (KiCad official)

  • Symbol: TM1931
  • Footprint: Package_SO:SOP-24_7.5x15.4mm_P1.27mm
  • 3D model: SOP-24 (KiCad packages3D, STEP)
  • 3D model files: tm1931-etched.step / tm1931-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm1931.step / tm1931.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (11 pp, sha256 1f5bf963bd761133, retrieved 2026-11-07, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF