3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTM1931
TM(Shenzhen Titan Micro Elec) · LED Drivers · SOP-24
TM1931 from TM(Shenzhen Titan Micro Elec), in a SOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDB | input | Hardware shutdown input; the chip stops working when it is pulled low. |
| 2 | OUT18 | output | Constant-current output channel 18, set by the R_EXT resistor with a maximum of 38mA. |
| 3 | R_EXT | input | Constant-current feedback pin; a resistor to ground sets the output current (recommended minimum 2kΩ, pin voltage typically 1.3V). |
| 4 | VCC | power_in | Positive supply, 2.7V to 5.5V. |
| 5 | GND | power_in | Power ground (negative supply). |
| 6 | SDA | bidirectional | I2C data line (open drain, pulled up externally, typically 4.7kΩ), up to 400kHz clock operation. |
| 7 | SCL | input | I2C clock input, maximum frequency 400kHz. |
| 8 | OUT1 | output | Constant-current output channel 1 with independent PWM control. |
| 9 | OUT2 | output | Constant-current output channel 2 with independent PWM control. |
| 10 | OUT3 | output | Constant-current output channel 3 with independent PWM control. |
| 11 | OUT4 | output | Constant-current output channel 4 with independent PWM control. |
| 12 | OUT5 | output | Constant-current output channel 5 with independent PWM control. |
| 13 | OUT6 | output | Constant-current output channel 6 with independent PWM control. |
| 14 | OUT7 | output | Constant-current output channel 7 with independent PWM control. |
| 15 | OUT8 | output | Constant-current output channel 8 with independent PWM control. |
| 16 | OUT9 | output | Constant-current output channel 9 with independent PWM control. |
| 17 | OUT10 | output | Constant-current output channel 10 with independent PWM control. |
| 18 | OUT11 | output | Constant-current output channel 11 with independent PWM control. |
| 19 | OUT12 | output | Constant-current output channel 12 with independent PWM control. |
| 20 | OUT13 | output | Constant-current output channel 13 with independent PWM control. |
| 21 | OUT14 | output | Constant-current output channel 14 with independent PWM control. |
| 22 | OUT15 | output | Constant-current output channel 15 with independent PWM control. |
| 23 | OUT16 | output | Constant-current output channel 16 with independent PWM control. |
| 24 | OUT17 | output | Constant-current output channel 17 with independent PWM control. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SOP-24 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | Vdd | -0.3 | 6 | V | 2 | ||
| SCL, SDA, SDB voltage | Vin | -0.3 | V | max Vcc+0.3 V | 2 | ||
| Maximum junction temperature | TMAX | 150 | ℃ | 2 | |||
| Storage temperature range | TSTG | -65 | 150 | ℃ | 2 | ||
| Operating temperature range | TA | -40 | 85 | ℃ | 2 | ||
| ESD (HBM) | 4 | kV | 2 | ||||
| Supply voltage | Vdd | 2.7 | 5.5 | V | 3 | ||
| Maximum output current | IMAX | 38 | mA | Vcc=4.2V, Vout=0.8V, REXT=2kΩ (note 1) | 3 | ||
| Quiescent supply current | Icc | 5.25 | mA | REXT=3.3kΩ | 3 | ||
| Shutdown current | IDD(ssd) | 3.1 | uA | VSDB=0V, or soft shutdown | 3 | ||
| Output leakage current | Ioh | 1 | uA | VSDB=0V, or soft shutdown; Voh=5V | 3 | ||
| R_EXT pin output voltage | VEXT | 1.3 | V | 3 | |||
| Logic 0 input voltage | VIL | 0.4 | V | Vcc=2.7V | 3 | ||
| Logic 1 input voltage | VIL | 1.4 | V | Vcc=5.5V | 3 | ||
| Logic 0 input current | VIL | 5 | nA | note 2 (design guaranteed) | 3 | ||
| Logic 1 input current | VIL | 5 | nA | note 2 (design guaranteed) | 3 | ||
| Serial clock frequency | fSCL | 400 | kHZ | 3 | |||
| Bus free time between STOP and START | tBUF | 1.3 | μ s | 3 | |||
| (Repeated) START hold time | tHD,STA | 0.6 | μ s | 3 | |||
| Repeated START setup time | tSU,STA | 0.6 | μ s | 3 | |||
| STOP setup time | tSU,STO | 0.6 | μ s | 3 | |||
| Data hold time | tHD,DAT | 0.9 | μ s | 3 | |||
| Data setup time | tSU,DAT | 100 | ns | 3 | |||
| SCL low period | tLOW | 1.3 | μ s | 3 | |||
| SCL high period | tHIGH | 0.7 | μ s | 3 | |||
| SDA and SCL rise time | tR | 300 | ns | note 3: Cb=bus capacitance (pF), minimum 20+0.1Cb, ISINK≤6mA | 3 | ||
| SDA and SCL fall time | tF | 300 | ns | note 3: Cb=bus capacitance (pF), minimum 20+0.1Cb, ISINK≤6mA | 3 |
CAD (KiCad official)
- Symbol:
TM1931 - Footprint:
Package_SO:SOP-24_7.5x15.4mm_P1.27mm - 3D model: SOP-24 (KiCad packages3D, STEP)
- 3D model files:
tm1931-etched.step/tm1931-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm1931.step/tm1931.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (11 pp, sha256
1f5bf963bd761133, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).