component
RT2515HGSP
Public Made by Adomby adom
Richtek Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownRT2515HGSP
Richtek Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOP-8-EP
RT2515HGSP from Richtek Tech, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; this pin is not connected inside the device. |
| 2 | EN | input | Active-high chip enable; pulling this pin below 0.4V turns the regulator off, and it is enabled if left open, so connect it to VIN if not used. |
| 3 | VIN | power_in | Input voltage; for full-load regulation it must be between (VOUT + 0.5V) and 6V with a minimum of 1.4V, and a minimum 10µF ceramic capacitor should be placed directly at this pin. |
| 4 | NC | unconnected | No internal connection; this pin is not connected inside the device. |
| 5 | NC | unconnected | No internal connection; this pin is not connected inside the device. |
| 6 | VOUT | power_out | Output voltage; a minimum of 10µF capacitor should be placed directly at this pin. |
| 7 | ADJ | input | Feedback pin; connecting it to VOUT sets the output to 0.5V, while external feedback resistors set the output by their ratio. |
| 8 | GND | power_in | Ground. |
| 9 | GND | power_in | Exposed pad (GND); it must be soldered to a large PCB and connected to GND for maximum power dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOP-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
RT2515HGSP - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
rt2515hgsp-etched.step/rt2515hgsp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt2515hgsp.step/rt2515hgsp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (9 pp, sha256
a8e58d5cd3964f6e, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).