Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

M24SR16-YDW6T

STMicroelectronics · RFID ICs · TSSOP-8 (ST TSSOP8)

M24SR16-YDW6T from STMicroelectronics, in a TSSOP-8 (ST TSSOP8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 RF disable input Input that disables RF communication; an external pull-down is required when VCC is above its POR level, and in Dual interface mode it must not be left floating.
2 AC0 passive Antenna coil terminal for connecting the external coil exclusively; no other DC or AC path should be connected.
3 AC1 passive Antenna coil terminal for connecting the external coil exclusively; no other DC or AC path should be connected.
4 VSS power_in Ground, the reference for the VCC supply voltage for all pads, even AC0 and AC1.
5 SDA bidirectional I2C serial data, open drain output that needs a pull-up resistor to VCC.
6 SCL input I2C serial clock input that strobes all data in and out of the device.
7 GPO output Configurable open drain general purpose output (default Session Open) that needs an external pull-up greater than 4.7 kΩ.
8 VCC power_in Supply voltage pin, 2.7 V to 5.5 V, to be decoupled with capacitors (about 10 nF and 100 pF) close to the VCC/VSS pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8 (ST TSSOP8)
Category RF And Wireless
Pins 8

CAD (Adom-generated)

  • Symbol: M24SR16-YDW6T
  • Footprint: Adom_Gen:STMicroelectronics_TSSOP8
  • 3D model: generated to fit the land (STEP)
  • 3D model files: m24sr16-ydw6t-etched.step / m24sr16-ydw6t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m24sr16-ydw6t.step / m24sr16-ydw6t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet, copy hosted by JLCPCB (88 pp, sha256 e1f759d2dbb03f04, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Its own sheet (sha e1f759d2dbb0) prints no TSSOP8 land; ST's printed TSSOP8 land, M24512 DS6520 Rev 31 p.32 Figure 18 (TSSOP8 - Recommended footprint): 1.0 x 0.35 mm pads, pitch 0.65, 7.0 outer, rows 6.0 c-c. Same package: this part's own outline on record (M24SR16-YDW6T-dims.extracted.json, TSSOP8 p.81): body (2.9, 3.1) x (4.3, 4.5), lead span (6.2, 6.6), pitch 0.65 = ST TSSOP8 (D 2.9/3.0/3.1, E1 4.3/4.4/4.5, E 6.2/6.4/6.6, e 0.65). Shared land Adom_Gen:STMicroelectronics_TSSOP8. Task master ruling 2026-11-21 (ST TSSOP8).

Datasheet PDF