3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownM24SR16-YDW6T
STMicroelectronics · RFID ICs · TSSOP-8 (ST TSSOP8)
M24SR16-YDW6T from STMicroelectronics, in a TSSOP-8 (ST TSSOP8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RF disable | input | Input that disables RF communication; an external pull-down is required when VCC is above its POR level, and in Dual interface mode it must not be left floating. |
| 2 | AC0 | passive | Antenna coil terminal for connecting the external coil exclusively; no other DC or AC path should be connected. |
| 3 | AC1 | passive | Antenna coil terminal for connecting the external coil exclusively; no other DC or AC path should be connected. |
| 4 | VSS | power_in | Ground, the reference for the VCC supply voltage for all pads, even AC0 and AC1. |
| 5 | SDA | bidirectional | I2C serial data, open drain output that needs a pull-up resistor to VCC. |
| 6 | SCL | input | I2C serial clock input that strobes all data in and out of the device. |
| 7 | GPO | output | Configurable open drain general purpose output (default Session Open) that needs an external pull-up greater than 4.7 kΩ. |
| 8 | VCC | power_in | Supply voltage pin, 2.7 V to 5.5 V, to be decoupled with capacitors (about 10 nF and 100 pF) close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 (ST TSSOP8) |
| Category | RF And Wireless |
| Pins | 8 |
CAD (Adom-generated)
- Symbol:
M24SR16-YDW6T - Footprint:
Adom_Gen:STMicroelectronics_TSSOP8 - 3D model: generated to fit the land (STEP)
- 3D model files:
m24sr16-ydw6t-etched.step/m24sr16-ydw6t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24sr16-ydw6t.step/m24sr16-ydw6t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet, copy hosted by JLCPCB (88 pp, sha256
e1f759d2dbb03f04, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Its own sheet (sha e1f759d2dbb0) prints no TSSOP8 land; ST's printed TSSOP8 land, M24512 DS6520 Rev 31 p.32 Figure 18 (TSSOP8 - Recommended footprint): 1.0 x 0.35 mm pads, pitch 0.65, 7.0 outer, rows 6.0 c-c. Same package: this part's own outline on record (M24SR16-YDW6T-dims.extracted.json, TSSOP8 p.81): body (2.9, 3.1) x (4.3, 4.5), lead span (6.2, 6.6), pitch 0.65 = ST TSSOP8 (D 2.9/3.0/3.1, E1 4.3/4.4/4.5, E 6.2/6.4/6.6, e 0.65). Shared land Adom_Gen:STMicroelectronics_TSSOP8. Task master ruling 2026-11-21 (ST TSSOP8).