component
TLV2362IDGKR
Public Made by Adomby adom
Texas Instruments Operational Amplifier, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV2362IDGKR
Texas Instruments · Operational Amplifier · VSSOP-8
TLV2362IDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1; the output swings to about ±2.4 V typical at VCC± = ±2.5 V with RL = 10 kΩ and must stay within the absolute maximum output voltage of ±3.5 V. |
| 2 | 1IN− | input | Inverting input of amplifier 1; input voltages must not exceed VCC (absolute maximum rating). |
| 3 | 1IN+ | input | Non-inverting input of amplifier 1; input voltages must not exceed VCC (absolute maximum rating). |
| 4 | VCC− | power_in | Negative supply rail; recommended supply is ±1 V minimum to ±2.5 V maximum, and the absolute maximum VCC− is −3.5 V. |
| 5 | 2IN+ | input | Non-inverting input of amplifier 2; input voltages must not exceed VCC (absolute maximum rating). |
| 6 | 2IN− | input | Inverting input of amplifier 2; input voltages must not exceed VCC (absolute maximum rating). |
| 7 | 2OUT | output | Output of amplifier 2; the output swings to about ±2.4 V typical at VCC± = ±2.5 V with RL = 10 kΩ and must stay within the absolute maximum output voltage of ±3.5 V. |
| 8 | VCC+ | power_in | Positive supply rail; recommended supply is ±1 V minimum to ±2.5 V maximum, and the absolute maximum VCC+ is 3.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 1 | 6 | mV | VCC±=±2.5 V, VO=0, VIC=0, 25°C | 5 | |
| Input offset voltage | VIO | 7.5 | mV | VCC±=±2.5 V, VO=0, VIC=0, full range | 5 | ||
| Input offset voltage | VIO | 1 | 6 | mV | VCC±=±1.5 V, VO=0, VIC=0, 25°C | 4 | |
| Input offset voltage | VIO | 7.5 | mV | VCC±=±1.5 V, VO=0, VIC=0, full range | 4 | ||
| Input offset current | IIO | 5 | 100 | nA | VCC±=±2.5 V, VO=0, VIC=0, 25°C | 5 | |
| Input offset current | IIO | 150 | nA | VCC±=±2.5 V, VO=0, VIC=0, full range | 5 | ||
| Input offset current | IIO | 5 | 100 | nA | VCC±=±1.5 V, VO=0, VIC=0, 25°C | 4 | |
| Input offset current | IIO | 150 | nA | VCC±=±1.5 V, VO=0, VIC=0, full range | 4 | ||
| Input bias current | IIB | 20 | 150 | nA | VCC±=±2.5 V, VO=0, VIC=0, 25°C | 5 | |
| Input bias current | IIB | 250 | nA | VCC±=±2.5 V, VO=0, VIC=0, full range | 5 | ||
| Input bias current | IIB | 20 | 150 | nA | VCC±=±1.5 V, VO=0, VIC=0, 25°C | 4 | |
| Input bias current | IIB | 250 | nA | VCC±=±1.5 V, VO=0, VIC=0, full range | 4 | ||
| Common-mode input voltage | VIC | -1.5 | 1.5 | V | VCC±=±2.5 V, /VIO/ ≤ 7.5 mV, 25°C | 5 | |
| Common-mode input voltage | VIC | -1.4 | 1.4 | V | VCC±=±2.5 V, /VIO/ ≤ 7.5 mV, full range | 5 | |
| Common-mode input voltage | VIC | -0.5 | 0.5 | V | VCC±=±1.5 V, /VIO/ ≤ 7.5 mV, 25°C | 4 | |
| Maximum positive peak output voltage | VOM+ | 2 | 2.4 | V | VCC±=±2.5 V, RL=10 kΩ, 25°C | 5 | |
| Maximum positive peak output voltage | VOM+ | 2 | V | VCC±=±2.5 V, RL≥10 kΩ, full range | 5 | ||
| Maximum positive peak output voltage | VOM+ | 1.2 | 1.4 | V | VCC±=±1.5 V, RL=10 kΩ, 25°C | 4 | |
| Maximum positive peak output voltage | VOM+ | 1.2 | V | VCC±=±1.5 V, RL≥10 kΩ, full range | 4 | ||
| Maximum negative peak output voltage | VOM− | -2.4 | -2 | V | VCC±=±2.5 V, RL=10 kΩ, 25°C | 5 | |
| Maximum negative peak output voltage | VOM− | -2 | V | VCC±=±2.5 V, RL≥10 kΩ, full range | 5 | ||
| Maximum negative peak output voltage | VOM− | -1.4 | -1.2 | V | VCC±=±1.5 V, RL=10 kΩ, 25°C | 4 | |
| Maximum negative peak output voltage | VOM− | -1.2 | V | VCC±=±1.5 V, RL≥10 kΩ, full range | 4 | ||
| Supply current (per amplifier) | ICC | 1.75 | 2.5 | mA | VCC±=±2.5 V, VO=0, no load, 25°C | 5 | |
| Supply current (per amplifier) | ICC | 3 | mA | VCC±=±2.5 V, VO=0, no load, full range | 5 | ||
| Supply current (per amplifier) | ICC | 1.4 | 2.25 | mA | VCC±=±1.5 V, VO=0, no load, 25°C | 4 | |
| Supply current (per amplifier) | ICC | 2.75 | mA | VCC±=±1.5 V, VO=0, no load, full range | 4 | ||
| Large-signal differential voltage amplification (TLV2362) | AVD | 60 | dB | VCC±=±2.5 V, VO=±1 V, RL=10 kΩ, 25°C | 5 | ||
| Large-signal differential voltage amplification (TLV2362) | AVD | 55 | dB | VCC±=±1.5 V, VO=±1 V, RL=10 kΩ, 25°C | 4 | ||
| Common-mode rejection ratio | CMRR | 85 | dB | VCC±=±2.5 V, VIC=±0.5 V, 25°C | 5 | ||
| Common-mode rejection ratio | CMRR | 75 | dB | VCC±=±1.5 V, VIC=±0.5 V, 25°C | 4 | ||
| Supply-voltage rejection ratio | kSVR | 80 | dB | VCC±=±1.5 V to ±2.5 V, 25°C | 5 | ||
| Supply-voltage rejection ratio | kSVR | 80 | dB | VCC±=±1.5 V to ±2.5 V, 25°C | 4 | ||
| Supply voltage, VCC+ | VCC+ | 3.5 | V | Referenced to midpoint of VCC+ and VCC− | 3 | ||
| Supply voltage, VCC− | VCC− | -3.5 | V | Referenced to midpoint of VCC+ and VCC− | 3 | ||
| Differential input voltage | VID | -3.5 | 3.5 | V | IN+ with respect to IN− | 3 | |
| Output voltage | VO | -3.5 | 3.5 | V | 3 | ||
| Output current | IO | 20 | mA | 3 | |||
| Operating virtual junction temperature | TJ | 150 | °C | 3 | |||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 3 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Supply voltage | VCC± | 1 | 2.5 | V | Supply voltage, each supply | 3 | |
| Operating free-air temperature (TLV2362I) | TA | -40 | 85 | °C | TLV2362I | 3 | |
| Package thermal impedance, DGK package | θJA | 172 | °C/W | DGK package, JESD 51-7 (see Notes 4 and 5) | 3 |
CAD (KiCad official)
- Symbol:
TLV2362IDGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tlv2362idgkr-etched.step/tlv2362idgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv2362idgkr.step/tlv2362idgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
279a60e119e0c604, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).