component
CA3140AMZ96
Public Made by Adomby adom
RENESAS Operational Amplifier, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownCA3140AMZ96
RENESAS · Operational Amplifier · SOIC-8
CA3140AMZ96 from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OFFSET_NULL | passive | Offset-null adjust terminal. Connect a potentiometer (typ ~18kΩ for CA3140A) between pins 1 and 5 with the wiper to V- (pin 4) to trim the input offset voltage to zero. |
| 2 | INV_INPUT | input | Inverting input (-) of the op-amp. High-impedance PMOS gate; input impedance ~1.5TΩ, input current ~10pA (typ, ±15V supply). Absolute input voltage limited to (V+ +8V) to (V- -0.5V). |
| 3 | NON-INV_INPUT | input | Non-inverting input (+) of the op-amp. High-impedance PMOS gate; common-mode range extends from ~V- -0.5V up to ~V+ -1.5V at ±15V (typ -15.5V to +12.5V). |
| 4 | V- | power_in | Negative supply rail (or ground in single-supply operation). Total supply voltage V+ to V- must not exceed 36V. Serves as the reference to which the output can swing to within ~0.13V in single-supply use. |
| 5 | OFFSET_NULL | passive | Second offset-null adjust terminal. Used with pin 1 and a potentiometer whose wiper returns to V- (pin 4) to trim V_IO. May alternatively be used with pin 4 for offset adjustment. |
| 6 | OUTPUT | output | Bipolar op-amp output. Short-circuit protected to either supply rail. Typical output swing +13V/-14.4V at ±15V into 2kΩ; source/sink short-circuit currents ~40mA/18mA. |
| 7 | V+ | power_in | Positive supply rail. Operating supply range 4V to 36V (single or dual). Typical supply current 4mA at ±15V (6mA max). |
| 8 | STROBE | input | Strobe/output-disable terminal. Sinking ~220µA from pin 8 to pin 4 (V-) forces the output to swing low, allowing the amplifier to be gated off. Also provides an access point for adding an external compensation capacitor if additional frequency roll-off is desired. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
CA3140AMZ96CA3140AMZ96AM96CA3140AMZ96MCA3140AMZ96M96CA3140AMZ96AECA3140AMZ96AEZCA3140AMZ96ECA3140AMZ96EZ
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage (between V+ and V- terminals) | 36 | V | V+ to V- terminals | 3 | |||
| Differential Mode Input Voltage | 8 | V | 3 | ||||
| Input Terminal Current | 1 | mA | 3 | ||||
| Operating Temperature Range | TA | -55 | 125 | oC | 3 | ||
| Supply Voltage (single or dual supply) | 4 | 36 | V | Operation from 4V to 36V, single or dual supply (Features / description) | 1 | ||
| Maximum Storage Temperature Range | -65 | 150 | oC | 3 | |||
| Maximum Junction Temperature (Plastic Package) | 150 | oC | 3 | ||||
| Maximum Lead Temperature (Soldering) | 300 | oC | Soldering 10s, SOIC lead tips only | 3 | |||
| Thermal Resistance Junction-to-Ambient, SOIC Package | θJA | 165 | oC/W | Typical, Note 1: component mounted on low effective thermal conductivity test board in free air | 3 | ||
| Input Offset Voltage | /VIO/ | 2 | 5 | mV | VSUPPLY = ±15V, TA = 25oC | 3 | |
| Input Offset Current | /IIO/ | 0.5 | 20 | pA | VSUPPLY = ±15V, TA = 25oC | 3 | |
| Input Current | II | 10 | 40 | pA | VSUPPLY = ±15V, TA = 25oC | 3 | |
| Large Signal Voltage Gain | AOL | 20 | 100 | kV/V | VSUPPLY = ±15V, TA = 25oC; VO = 26VP-P, +12V, -14V and RL = 2kΩ (Note 3) | 4 | |
| Large Signal Voltage Gain | AOL | 86 | 100 | dB | VSUPPLY = ±15V, TA = 25oC; VO = 26VP-P, +12V, -14V and RL = 2kΩ (Note 3) | 4 | |
| Common Mode Rejection Ratio | CMRR | 32 | 320 | µV/V | VSUPPLY = ±15V, TA = 25oC | 4 | |
| Common Mode Rejection Ratio | CMRR | 70 | 90 | dB | VSUPPLY = ±15V, TA = 25oC | 4 | |
| Common Mode Input Voltage Range | VICR | -15 | 12 | V | VSUPPLY = ±15V, TA = 25oC | 4 | |
| Power-Supply Rejection Ratio ΔVIO/ΔVS | PSRR | 100 | 150 | µV/V | VSUPPLY = ±15V, TA = 25oC | 4 | |
| Power-Supply Rejection Ratio ΔVIO/ΔVS | PSRR | 76 | 80 | dB | VSUPPLY = ±15V, TA = 25oC | 4 | |
| Max Output Voltage, positive | VOM+ | 12 | 13 | V | VSUPPLY = ±15V, TA = 25oC; RL = 2kΩ (Note 4) | 4 | |
| Max Output Voltage, negative | VOM- | -14 | -14.4 | V | VSUPPLY = ±15V, TA = 25oC; RL = 2kΩ (Note 4) | 4 | |
| Supply Current | I+ | 4 | 6 | mA | VSUPPLY = ±15V, TA = 25oC | 4 | |
| Device Dissipation | PD | 120 | 180 | mW | VSUPPLY = ±15V, TA = 25oC | 4 |
CAD (KiCad official)
- Symbol:
CA3140AMZ96 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ca3140amz96-etched.step/ca3140amz96-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ca3140amz96.step/ca3140amz96.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (23 pp, sha256
8e73779b729359d8, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).