Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FAN73893MX

onsemi · Gate Drive ICs · SOIC-28-300mil

FAN73893MX from onsemi, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Logic and low-side gate driver power supply; recommended 10 V to 20 V, absolute maximum −0.3 V to 25.0 V.
2 HIN1 input Logic input 1 for the high-side gate 1 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V.
3 HIN2 input Logic input 2 for the high-side gate 2 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V.
4 HIN3 input Logic input 3 for the high-side gate 3 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V.
5 LIN1 input Logic input 1 for the low-side gate 1 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V.
6 LIN2 input Logic input 2 for the low-side gate 2 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V.
7 LIN3 input Logic input 3 for the low-side gate 3 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V.
8 FO output Open-drain fault output that indicates over-current or low-side VDD under-voltage shutdown; it is pulled internally to COM during a fault, and absolute maximum is −0.3 V to VDD + 0.3 V.
9 CS input Analog input for over-current shutdown, with an over-current detect positive threshold of 450 mV to 550 mV (500 mV typical) and recommended range VSS to VSS + 5 V.
10 EN input Logic enable input; a LOW state shuts down the gate driver outputs, with a logic-high threshold of 2.5 V minimum and a logic-low threshold of 0.8 V maximum.
11 RCIN passive External RC network input that defines the fault-clear delay through CRCIN, with an internal 5 µA (typical) current source and a 3.3 V (typical) positive-going threshold.
12 VSS power_in Logic ground; recommended operating range is −5 V to 5 V.
13 COM power_in Low-side driver return; the low-side outputs LO1, LO2 and LO3 are referenced to COM.
14 LO3 output Low-side gate driver 3 output, referenced to COM and swinging up to VDD.
15 LO2 output Low-side gate driver 2 output, referenced to COM and swinging up to VDD.
16 LO1 output Low-side gate driver 1 output, referenced to COM and swinging up to VDD.
17 NC unconnected No connect.
18 VS3 power_in High-side driver 3 floating supply offset voltage; absolute maximum range is VB3 − 25 V to VB3 + 0.3 V.
19 HO3 output High-side driver 3 gate driver output, referenced to VS3 and swinging between VS3 and VB3.
20 VB3 power_in High-side driver 3 floating supply; recommended VS3 + 10 V to VS3 + 20 V, absolute maximum 625 V.
21 NC unconnected No connect.
22 VS2 power_in High-side driver 2 floating supply offset voltage; absolute maximum range is VB2 − 25 V to VB2 + 0.3 V.
23 HO2 output High-side driver 2 gate driver output, referenced to VS2 and swinging between VS2 and VB2.
24 VB2 power_in High-side driver 2 floating supply; recommended VS2 + 10 V to VS2 + 20 V, absolute maximum 625 V.
25 NC unconnected No connect.
26 VS1 power_in High-side driver 1 floating supply offset voltage (the pin table prints this pin as “floating supply”); absolute maximum range is VB1 − 25 V to VB1 + 0.3 V.
27 HO1 output High-side driver 1 gate driver output, referenced to VS1 and swinging between VS1 and VB1.
28 VB1 power_in High-side driver 1 floating supply; recommended VS1 + 10 V to VS1 + 20 V, absolute maximum 625 V.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-28-300mil
Category Power Management ICs
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High-Side Floating Supply Voltage VB -0.3 625 V 4
Low-Side and Logic-Fixed supply voltage VDD -0.3 25 V 4
Low-Side Floating Output Voltage VLO -0.3 V 4
Fault Output Voltage (FO) VFO -0.3 V 4
Allowable Offset Voltage Slew Rate dVS/dt -50 50 V/ns 4
Power Dissipation PD 1.4 W Note 2, 3 4
Junction Temperature TJ 150 °C 4
Storage Temperature TSTG -55 150 °C 4
Thermal Resistance JA 70 °C/W 4
High-Side Floating Supply Offset Voltage VS1,2,3 600 V 4
Low-Side and Logic Fixed Supply Voltage VDD 10 20 V 4
Logic Ground VSS -5 5 V 4
Ambient Temperature TA -40 125 °C 4
Operating VDD Supply Current IPDD 550 750 µA fLIN1,2,3 = 20 kHz, rms Value 5
Quiescent VDD Supply Current IQDD 250 400 µA VLIN1,2,3 = 5 V or open, EN = 0 V 5
VDD Supply Under-Voltage Positive-Going Threshold VDDUV+ 7.5 8.5 9.3 V VDD = Sweep 5
VDD Supply Under-Voltage Negative-Going Threshold VDDUV- 7 8 8.7 V VDD = Sweep 5
VBS Supply Under-Voltage Positive-Going Threshold VBSUV+ 7.5 8.5 9.3 V VBS1,2,3 = Sweep 5
VBS Supply Under-Voltage Negative-Going Threshold VBSUV- 7 8 8.7 V VBS1,2,3 = Sweep 5
Offset Supply Leakage Current ILK 10 µA VB1,2,3 = VS1,2,3 = 600 V 5
Quiescent VBS Supply Current IQBS 10 50 80 µA VHIN1,2,3 = 0 V or 5 V, EN = 0 V 5
Operating VBS Supply Current IPBS 200 320 480 µA fHIN1,2,3 = 20 kHz, rms Value 5
High-Level Output voltage, VBIAS - VO VOH 100 mV IO = 0 mA (No Load) 5
Low-Level Output voltage, VO VOL 100 mV IO = 0 mA (No Load) 5
Output HIGH Short-Circuit Pulse Current (Note 4) IO+ 250 350 mA VO = 0 V, VIN = 0 V with PW ≤ 10 s 5
Output LOW Short-Circuit Pulsed Current (Note 4) IO- 500 650 mA VO = 15 V, VIN = 5 V with PW ≤ 10 s 5
Allowable Negative VS Pin Voltage for HIN Signal Propagation to HO VS -9.8 -9 V 5
Logic '0' Input Voltage VIH 2.5 V HIN1,2,3, LIN1,2,3 5
Logic '1' Input Voltage VIL 0.8 V HIN1,2,3, LIN1,2,3 5
Logic Input Bias Current (HO = LO = HIGH) IIN+ 77 100 143 µA VIN = 0 V 5
Logic Input Bias Current (HO = LO = LOW) IIN- 8.5 25 µA VIN = 5 V 5
Logic Input Pull-Up Resistance RIN 35 50 65 kΩ 5
Enable Positive-Going Threshold Voltage VEN+ 2.5 V 5
Enable Negative-Going Threshold Voltage VEN- 0.8 V 5
Logic Enable '1' Input Bias Current IEN+ 15 33 50 µA VEN = 5 V (Pull-Down = 150 k) 5
Logic Enable '0' Input Bias Current IEN- 2 µA VEN = 0 V 5
Logic Input Pull-Down Resistance REN 100 150 333 kΩ 5
Over-Current Detect Positive Threshold VCSTH+ 450 500 550 mV 5
Short-Circuit Input Current ICSIN 5 10 15 µA VCSIN = 1 V 5
Soft Turn-Off Sink Current ISOFT 25 40 55 mA 5
RCIN Positive-Going Threshold Voltage VRCINTH+ 2.7 3.3 3.9 V 6
Fault Output Low Level Voltage VFOL 0.2 0.5 V VCS = 1 V, IFO = 1.5 mA 6
RCIN Internal Current Source IRCIN 3 5 7 µA CRCIN = 2 nF 6
RCIN On Resistance RDSRCIN 50 75 100 Ω IRCIN = 1.5 mA 6
Fault Output On Resistance RDSFO 90 130 170 Ω IFO = 1.5 mA 6
Turn-On Propagation Delay tON 350 500 650 ns VLIN1,2,3 = VHIN1,2,3 = 0 V, VS1,2,3 = 0 V 6
Turn-Off Propagation Delay tOFF 350 500 650 ns VLIN1,2,3 = VHIN1,2,3 = 5 V, VS1,2,3 = 0 V 6
Turn-On Rise Time tR 20 50 100 ns VLIN1,2,3 = VHIN1,2,3 = 0 V 6
Turn-Off Fall Time tF 10 30 80 ns VLIN1,2,3 = VHIN1,2,3 = 5 V 6
Enable LOW to Output Shutdown Delay tEN 400 500 600 ns 6
CS Pin Leading-Edge Blanking Time tCSBLT 400 650 850 ns 6
Time from CS Triggering to FO tCSFO 850 1300 ns From VCSC = 1 V to FO Turn-Off 6
Time from CS Triggering to Low-Side Gate Outputs Turn-Off tCSOFF 850 1300 ns From VCSC = 1 V to Starting Gate Turn-Off 6
Input Filtering Time (Note 5) (HINx, LINx, EN) tFLTIN 170 250 330 ns 6
Fault-Clear Time tFLTCLR 1.3 2.35 ms CRCIN = 2 nF 6
Dead Time DT 230 320 400 ns 6
Dead-Time Matching (All Six Channels) MDT 50 ns 6
Delay Matching (All Six Channels) MT 50 ns 6
Output Pulse-Width Matching (Note 6) PM 50 100 ns PWIN > 1 s 6

CAD (KiCad official)

  • Symbol: FAN73893MX
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: fan73893mx-etched.step / fan73893mx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fan73893mx.step / fan73893mx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (17 pp, sha256 14ce477b0a381e15, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF