component
FAN73893MX
Public Made by Adomby adom
onsemi Gate Drive ICs, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
FAN73893MX
onsemi · Gate Drive ICs · SOIC-28-300mil
FAN73893MX from onsemi, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Logic and low-side gate driver power supply; recommended 10 V to 20 V, absolute maximum −0.3 V to 25.0 V. |
| 2 | HIN1 | input | Logic input 1 for the high-side gate 1 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V. |
| 3 | HIN2 | input | Logic input 2 for the high-side gate 2 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V. |
| 4 | HIN3 | input | Logic input 3 for the high-side gate 3 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V. |
| 5 | LIN1 | input | Logic input 1 for the low-side gate 1 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V. |
| 6 | LIN2 | input | Logic input 2 for the low-side gate 2 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V. |
| 7 | LIN3 | input | Logic input 3 for the low-side gate 3 driver, referenced to VSS with a recommended range of VSS to VSS + 5 V. |
| 8 | FO | output | Open-drain fault output that indicates over-current or low-side VDD under-voltage shutdown; it is pulled internally to COM during a fault, and absolute maximum is −0.3 V to VDD + 0.3 V. |
| 9 | CS | input | Analog input for over-current shutdown, with an over-current detect positive threshold of 450 mV to 550 mV (500 mV typical) and recommended range VSS to VSS + 5 V. |
| 10 | EN | input | Logic enable input; a LOW state shuts down the gate driver outputs, with a logic-high threshold of 2.5 V minimum and a logic-low threshold of 0.8 V maximum. |
| 11 | RCIN | passive | External RC network input that defines the fault-clear delay through CRCIN, with an internal 5 µA (typical) current source and a 3.3 V (typical) positive-going threshold. |
| 12 | VSS | power_in | Logic ground; recommended operating range is −5 V to 5 V. |
| 13 | COM | power_in | Low-side driver return; the low-side outputs LO1, LO2 and LO3 are referenced to COM. |
| 14 | LO3 | output | Low-side gate driver 3 output, referenced to COM and swinging up to VDD. |
| 15 | LO2 | output | Low-side gate driver 2 output, referenced to COM and swinging up to VDD. |
| 16 | LO1 | output | Low-side gate driver 1 output, referenced to COM and swinging up to VDD. |
| 17 | NC | unconnected | No connect. |
| 18 | VS3 | power_in | High-side driver 3 floating supply offset voltage; absolute maximum range is VB3 − 25 V to VB3 + 0.3 V. |
| 19 | HO3 | output | High-side driver 3 gate driver output, referenced to VS3 and swinging between VS3 and VB3. |
| 20 | VB3 | power_in | High-side driver 3 floating supply; recommended VS3 + 10 V to VS3 + 20 V, absolute maximum 625 V. |
| 21 | NC | unconnected | No connect. |
| 22 | VS2 | power_in | High-side driver 2 floating supply offset voltage; absolute maximum range is VB2 − 25 V to VB2 + 0.3 V. |
| 23 | HO2 | output | High-side driver 2 gate driver output, referenced to VS2 and swinging between VS2 and VB2. |
| 24 | VB2 | power_in | High-side driver 2 floating supply; recommended VS2 + 10 V to VS2 + 20 V, absolute maximum 625 V. |
| 25 | NC | unconnected | No connect. |
| 26 | VS1 | power_in | High-side driver 1 floating supply offset voltage (the pin table prints this pin as “floating supply”); absolute maximum range is VB1 − 25 V to VB1 + 0.3 V. |
| 27 | HO1 | output | High-side driver 1 gate driver output, referenced to VS1 and swinging between VS1 and VB1. |
| 28 | VB1 | power_in | High-side driver 1 floating supply; recommended VS1 + 10 V to VS1 + 20 V, absolute maximum 625 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-28-300mil |
| Category | Power Management ICs |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-Side Floating Supply Voltage | VB | -0.3 | 625 | V | 4 | ||
| Low-Side and Logic-Fixed supply voltage | VDD | -0.3 | 25 | V | 4 | ||
| Low-Side Floating Output Voltage | VLO | -0.3 | V | 4 | |||
| Fault Output Voltage (FO) | VFO | -0.3 | V | 4 | |||
| Allowable Offset Voltage Slew Rate | dVS/dt | -50 | 50 | V/ns | 4 | ||
| Power Dissipation | PD | 1.4 | W | Note 2, 3 | 4 | ||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature | TSTG | -55 | 150 | °C | 4 | ||
| Thermal Resistance | JA | 70 | °C/W | 4 | |||
| High-Side Floating Supply Offset Voltage | VS1,2,3 | 600 | V | 4 | |||
| Low-Side and Logic Fixed Supply Voltage | VDD | 10 | 20 | V | 4 | ||
| Logic Ground | VSS | -5 | 5 | V | 4 | ||
| Ambient Temperature | TA | -40 | 125 | °C | 4 | ||
| Operating VDD Supply Current | IPDD | 550 | 750 | µA | fLIN1,2,3 = 20 kHz, rms Value | 5 | |
| Quiescent VDD Supply Current | IQDD | 250 | 400 | µA | VLIN1,2,3 = 5 V or open, EN = 0 V | 5 | |
| VDD Supply Under-Voltage Positive-Going Threshold | VDDUV+ | 7.5 | 8.5 | 9.3 | V | VDD = Sweep | 5 |
| VDD Supply Under-Voltage Negative-Going Threshold | VDDUV- | 7 | 8 | 8.7 | V | VDD = Sweep | 5 |
| VBS Supply Under-Voltage Positive-Going Threshold | VBSUV+ | 7.5 | 8.5 | 9.3 | V | VBS1,2,3 = Sweep | 5 |
| VBS Supply Under-Voltage Negative-Going Threshold | VBSUV- | 7 | 8 | 8.7 | V | VBS1,2,3 = Sweep | 5 |
| Offset Supply Leakage Current | ILK | 10 | µA | VB1,2,3 = VS1,2,3 = 600 V | 5 | ||
| Quiescent VBS Supply Current | IQBS | 10 | 50 | 80 | µA | VHIN1,2,3 = 0 V or 5 V, EN = 0 V | 5 |
| Operating VBS Supply Current | IPBS | 200 | 320 | 480 | µA | fHIN1,2,3 = 20 kHz, rms Value | 5 |
| High-Level Output voltage, VBIAS - VO | VOH | 100 | mV | IO = 0 mA (No Load) | 5 | ||
| Low-Level Output voltage, VO | VOL | 100 | mV | IO = 0 mA (No Load) | 5 | ||
| Output HIGH Short-Circuit Pulse Current (Note 4) | IO+ | 250 | 350 | mA | VO = 0 V, VIN = 0 V with PW ≤ 10 s | 5 | |
| Output LOW Short-Circuit Pulsed Current (Note 4) | IO- | 500 | 650 | mA | VO = 15 V, VIN = 5 V with PW ≤ 10 s | 5 | |
| Allowable Negative VS Pin Voltage for HIN Signal Propagation to HO | VS | -9.8 | -9 | V | 5 | ||
| Logic '0' Input Voltage | VIH | 2.5 | V | HIN1,2,3, LIN1,2,3 | 5 | ||
| Logic '1' Input Voltage | VIL | 0.8 | V | HIN1,2,3, LIN1,2,3 | 5 | ||
| Logic Input Bias Current (HO = LO = HIGH) | IIN+ | 77 | 100 | 143 | µA | VIN = 0 V | 5 |
| Logic Input Bias Current (HO = LO = LOW) | IIN- | 8.5 | 25 | µA | VIN = 5 V | 5 | |
| Logic Input Pull-Up Resistance | RIN | 35 | 50 | 65 | kΩ | 5 | |
| Enable Positive-Going Threshold Voltage | VEN+ | 2.5 | V | 5 | |||
| Enable Negative-Going Threshold Voltage | VEN- | 0.8 | V | 5 | |||
| Logic Enable '1' Input Bias Current | IEN+ | 15 | 33 | 50 | µA | VEN = 5 V (Pull-Down = 150 k) | 5 |
| Logic Enable '0' Input Bias Current | IEN- | 2 | µA | VEN = 0 V | 5 | ||
| Logic Input Pull-Down Resistance | REN | 100 | 150 | 333 | kΩ | 5 | |
| Over-Current Detect Positive Threshold | VCSTH+ | 450 | 500 | 550 | mV | 5 | |
| Short-Circuit Input Current | ICSIN | 5 | 10 | 15 | µA | VCSIN = 1 V | 5 |
| Soft Turn-Off Sink Current | ISOFT | 25 | 40 | 55 | mA | 5 | |
| RCIN Positive-Going Threshold Voltage | VRCINTH+ | 2.7 | 3.3 | 3.9 | V | 6 | |
| Fault Output Low Level Voltage | VFOL | 0.2 | 0.5 | V | VCS = 1 V, IFO = 1.5 mA | 6 | |
| RCIN Internal Current Source | IRCIN | 3 | 5 | 7 | µA | CRCIN = 2 nF | 6 |
| RCIN On Resistance | RDSRCIN | 50 | 75 | 100 | Ω | IRCIN = 1.5 mA | 6 |
| Fault Output On Resistance | RDSFO | 90 | 130 | 170 | Ω | IFO = 1.5 mA | 6 |
| Turn-On Propagation Delay | tON | 350 | 500 | 650 | ns | VLIN1,2,3 = VHIN1,2,3 = 0 V, VS1,2,3 = 0 V | 6 |
| Turn-Off Propagation Delay | tOFF | 350 | 500 | 650 | ns | VLIN1,2,3 = VHIN1,2,3 = 5 V, VS1,2,3 = 0 V | 6 |
| Turn-On Rise Time | tR | 20 | 50 | 100 | ns | VLIN1,2,3 = VHIN1,2,3 = 0 V | 6 |
| Turn-Off Fall Time | tF | 10 | 30 | 80 | ns | VLIN1,2,3 = VHIN1,2,3 = 5 V | 6 |
| Enable LOW to Output Shutdown Delay | tEN | 400 | 500 | 600 | ns | 6 | |
| CS Pin Leading-Edge Blanking Time | tCSBLT | 400 | 650 | 850 | ns | 6 | |
| Time from CS Triggering to FO | tCSFO | 850 | 1300 | ns | From VCSC = 1 V to FO Turn-Off | 6 | |
| Time from CS Triggering to Low-Side Gate Outputs Turn-Off | tCSOFF | 850 | 1300 | ns | From VCSC = 1 V to Starting Gate Turn-Off | 6 | |
| Input Filtering Time (Note 5) (HINx, LINx, EN) | tFLTIN | 170 | 250 | 330 | ns | 6 | |
| Fault-Clear Time | tFLTCLR | 1.3 | 2.35 | ms | CRCIN = 2 nF | 6 | |
| Dead Time | DT | 230 | 320 | 400 | ns | 6 | |
| Dead-Time Matching (All Six Channels) | MDT | 50 | ns | 6 | |||
| Delay Matching (All Six Channels) | MT | 50 | ns | 6 | |||
| Output Pulse-Width Matching (Note 6) | PM | 50 | 100 | ns | PWIN > 1 s | 6 |
CAD (KiCad official)
- Symbol:
FAN73893MX - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
fan73893mx-etched.step/fan73893mx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fan73893mx.step/fan73893mx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (17 pp, sha256
14ce477b0a381e15, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).