3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS2121RUXR
Texas Instruments · Battery Management · VQFN-HR-12(2x2.5)
TPS2121RUXR from Texas Instruments, in a VQFN-HR-12(2x2.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Power output that delivers the selected input to the load; output current is internally limited, with TPS2121 current limit up to 4.5 A. |
| 2 | IN2 | power_in | Power input for source 2; TPS2121 continuous input current is rated 4.5 A with an input voltage range of 2.8 V to 22 V. |
| 3 | CP2 | input | Enables comparator operation and is compared to PR1 to set the switchover voltage; connect to GND if not required (TPS2121 only). |
| 4 | OV2 | input | Active low enable supervisor for IN2 overvoltage protection; connect to GND if not required; control pin voltage 0 to 5.5 V. |
| 5 | OV1 | input | Active low enable supervisor for IN1 overvoltage protection; connect to GND if not required; control pin voltage 0 to 5.5 V. |
| 6 | PR1 | input | Enables priority operation; connect to IN1 to set the switchover voltage or to GND if not required; control pin voltage 0 to 5.5 V. |
| 7 | IN1 | power_in | Power input for source 1; TPS2121 continuous input current is rated 4.5 A with an input voltage range of 2.8 V to 22 V. |
| 8 | OUT | power_out | Power output that delivers the selected input to the load; output current is internally limited, with TPS2121 current limit up to 4.5 A. |
| 9 | ST | output | Status output indicating which channel is selected; connect to GND if not required; status pin pull-up resistance 6 kΩ to 20 kΩ. |
| 10 | ILIM | output | Output current limiting for both channels; current limit resistance is 18 kΩ to 100 kΩ. |
| 11 | SS | output | Adjusts input settling delay time and output soft start time; SS pin output voltage is 4 V. |
| 12 | GND | power_in | Device ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-HR-12(2x2.5) |
| Category | Power Management (PMIC) |
| Pins | 12 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Power Pin Voltage | VIN1, VIN2, VOUT | -0.3 | 24 | V | 6 | ||
| Maximum Overvoltage Pin Voltage | VOV1, VOV2 | -0.3 | 6 | V | 6 | ||
| Maximum Control Pin Voltage | VPRI, VSEL | -0.3 | 6 | V | 6 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 6 | ||
| Input Voltage Range | VIN1, VIN2 | 2.8 | 22 | V | IN1, IN2 | 6 | |
| Output Voltage Range | VOUT | 0 | 22 | V | OUT | 6 | |
| Overvoltage Pin Voltage | VOV1, VOV2 | 0 | 5.5 | V | OV1, OV2 | 6 | |
| Control Pin Voltage | VPRI, VSEL | 0 | 5.5 | V | PRI, SEL | 6 | |
| Status Pin Pull Up Resistance | RST | 6 | 20 | kΩ | ST | 6 | |
| Current Limit Resistance | RILM | 18 | 100 | kΩ | ILM | 6 | |
| SS Pin Output Voltage | VSS | 4 | V | SS | 6 | ||
| TPS2121 Continuous Input Current | IIN1, IIN2 | 4.5 | A | IN1, IN2 | 6 | ||
| Junction temperature | TJ | -40 | 125 | °C | 6 | ||
| Quiescent Current (INx powering OUT) | IQ, INx | 300 | 400 | µA | OUT = Open; -40°C to 125°C | 7 | |
| Standby Current (INx not powering OUT) | ISBY, INx | 0 | 15 | 25 | µA | VOUT = VINx; 25°C | 7 |
| Standby Current (INx not powering OUT) | ISBY, INx | 25 | µA | VOUT = VINx; -40°C to 125°C | 7 | ||
| Leakage Current (INx to OUT) | ILK, INx | -1 | 1 | µA | /VINx - VOUT/ ≤ 5V; 25°C | 7 | |
| Leakage Current (INx to OUT) | ILK, INx | -5 | 5 | µA | /VINx - VOUT/ ≤ 5V; -40°C to 85°C | 7 | |
| Leakage Current (INx to OUT) | ILK, INx | -80 | 80 | µA | /VINx - VOUT/ ≤ 5V; -40°C to 125°C | 7 | |
| Leakage Current (INx to OUT) | ILK, INx | -35 | 35 | µA | /VINx - VOUT/ ≤ 22V; -40°C to 85°C | 7 | |
| Leakage Current (INx to OUT) | ILK, INx | -500 | 500 | µA | /VINx - VOUT/ ≤ 22V; -40°C to 125°C | 7 | |
| Undervoltage Lockout, rising | VUV, INx | 2.5 | 2.65 | 2.8 | V | VINx Rising; -40°C to 125°C | 7 |
| Undervoltage Lockout, falling | VUV, INx | 2.4 | 2.55 | 2.7 | V | VINx Falling; -40°C to 125°C | 7 |
| Switchover Time | tSW | 100 | µs | VOUT < VINx; CP2 or SEL < VREF; -40°C to 125°C | 7 | ||
| Fast Switchover Time (TPS2121 only) | tFSW | 5 | µs | VOUT < VINx; CP2 ≥ VREF; -40°C to 125°C | 7 | ||
| Input Voltage Comparator (VIN2 referenced to VIN1) | VCOMP | 0 | 280 | 600 | mV | VIN1 ≥ VIN2; -40°C to 125°C | 7 |
| Input Voltage Comparator Hysteresis | VCOMP | 2.5 | 3.5 | 4.5 | % | VIN1 > VIN2, Falling; -40°C to 125°C | 7 |
| ON-State Resistance (TPS2121) | RON | 56 | 70 | mΩ | IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; 25°C | 7 | |
| ON-State Resistance (TPS2121) | RON | 85 | mΩ | IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; -40°C to 85°C | 7 | ||
| ON-State Resistance (TPS2121) | RON | 90 | mΩ | IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; -40°C to 105°C | 7 | ||
| ON-State Resistance (TPS2121) | RON | 100 | mΩ | IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; -40°C to 125°C | 7 | ||
| Output Current Limit (TPS2121) | ILM | 4.6 | 5.2 | 5.8 | A | RILM = 18.7kΩ; -40°C to 125°C | 8 |
| Output Current Limit (TPS2121) | ILM | 4 | 4.5 | 5 | A | RILM = 22.1kΩ; -40°C to 125°C | 8 |
| Output Current Limit (TPS2121) | ILM | 3 | 3.5 | 4 | A | RILM = 29.8kΩ; -40°C to 125°C | 8 |
| Output Current Limit (TPS2121) | ILM | 2 | 2.5 | 3 | A | RILM = 44.2kΩ; -40°C to 125°C | 8 |
| Output Current Limit (TPS2121) | ILM | 1 | 1.5 | 2 | A | RILM = 80kΩ; -40°C to 125°C | 8 |
| Output Current Limit (TPS2121) | ILM | 1.5 | 2.5 | 3.5 | A | RILM < 1kΩ; -40°C to 125°C | 8 |
| Current Limit Response Time | tLM | 250 | µs | Output Steady State; -40°C to 125°C | 8 | ||
| Internal Voltage Reference, rising | VREF, x | 1.01 | 1.06 | 1.1 | V | VPR1, VCP2, VOV1, VOV2 Rising; -40°C to 125°C | 8 |
| Internal Voltage Reference, falling | VREF, x | 0.99 | 1.04 | 1.09 | V | VPR1, VCP2, VOV1, VOV2 Falling; -40°C to 125°C | 8 |
| Comparator Offset Voltage (TPS2121 only) | VOFST | 5 | 20 | 40 | mV | VPR1 > VREF, VCP2 > VREF; -40°C to 125°C | 8 |
| Pin Leakage Current | ILK, x | -0.1 | 0.1 | µA | VPR1, VCP2, VOV1, VOV2 = 0 V to 5.5 V; -40°C to 125°C | 8 | |
| Status Pin Leakage | ILK, ST | -0.1 | 0.1 | µA | VST = 0 V to 5.5 V; -40°C to 125°C | 8 | |
| Status Delay L to H | tST | 1 | µs | -40°C to 125°C | 8 | ||
| Fast Reverse Current Detection Threshold | IRCB | 0.2 | 1 | 2 | A | VOUT > VINx; -40°C to 125°C | 8 |
| RCB Release Voltage | VRCB | 0 | 25 | 50 | mV | VOUT > VINx; -40°C to 125°C | 8 |
| Fast Reverse Current Blocking Response Time | tRCB | 10 | µs | -40°C to 125°C | 8 | ||
| Thermal Shutdown, rising | TSD | 160 | °C | Shutdown Rising | 8 | ||
| Thermal Shutdown, recovery falling | TSD | 150 | °C | Recovery Falling | 8 | ||
| Junction-to-ambient thermal resistance | RθJA | 72.2 | °C/W | RNW (PKG FAM) 11 pins | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 38.5 | °C/W | RNW (PKG FAM) 11 pins | 7 | ||
| Junction-to-board thermal resistance | RθJB | 15.4 | °C/W | RNW (PKG FAM) 11 pins | 7 | ||
| Junction-to-top characterization parameter | ΨJT | 0.9 | °C/W | RNW (PKG FAM) 11 pins | 7 | ||
| Junction-to-board characterization parameter | ΨJB | 15.5 | °C/W | RNW (PKG FAM) 11 pins | 7 |
CAD (Adom-generated)
- Symbol:
TPS2121RUXR - Footprint:
Adom_Gen:Texas_Instruments_TPS2121_d30295 - 3D model: generated to fit the land (STEP)
- 3D model files:
tps2121ruxr-etched.step/tps2121ruxr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps2121ruxr.step/tps2121ruxr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
b2f5950f596dc2c4, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.