Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS2121RUXR

Texas Instruments · Battery Management · VQFN-HR-12(2x2.5)

TPS2121RUXR from Texas Instruments, in a VQFN-HR-12(2x2.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 OUT power_out Power output that delivers the selected input to the load; output current is internally limited, with TPS2121 current limit up to 4.5 A.
2 IN2 power_in Power input for source 2; TPS2121 continuous input current is rated 4.5 A with an input voltage range of 2.8 V to 22 V.
3 CP2 input Enables comparator operation and is compared to PR1 to set the switchover voltage; connect to GND if not required (TPS2121 only).
4 OV2 input Active low enable supervisor for IN2 overvoltage protection; connect to GND if not required; control pin voltage 0 to 5.5 V.
5 OV1 input Active low enable supervisor for IN1 overvoltage protection; connect to GND if not required; control pin voltage 0 to 5.5 V.
6 PR1 input Enables priority operation; connect to IN1 to set the switchover voltage or to GND if not required; control pin voltage 0 to 5.5 V.
7 IN1 power_in Power input for source 1; TPS2121 continuous input current is rated 4.5 A with an input voltage range of 2.8 V to 22 V.
8 OUT power_out Power output that delivers the selected input to the load; output current is internally limited, with TPS2121 current limit up to 4.5 A.
9 ST output Status output indicating which channel is selected; connect to GND if not required; status pin pull-up resistance 6 kΩ to 20 kΩ.
10 ILIM output Output current limiting for both channels; current limit resistance is 18 kΩ to 100 kΩ.
11 SS output Adjusts input settling delay time and output soft start time; SS pin output voltage is 4 V.
12 GND power_in Device ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-HR-12(2x2.5)
Category Power Management (PMIC)
Pins 12

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Maximum Power Pin Voltage VIN1, VIN2, VOUT -0.3 24 V 6
Maximum Overvoltage Pin Voltage VOV1, VOV2 -0.3 6 V 6
Maximum Control Pin Voltage VPRI, VSEL -0.3 6 V 6
Storage temperature TSTG -65 150 °C 6
Input Voltage Range VIN1, VIN2 2.8 22 V IN1, IN2 6
Output Voltage Range VOUT 0 22 V OUT 6
Overvoltage Pin Voltage VOV1, VOV2 0 5.5 V OV1, OV2 6
Control Pin Voltage VPRI, VSEL 0 5.5 V PRI, SEL 6
Status Pin Pull Up Resistance RST 6 20 kΩ ST 6
Current Limit Resistance RILM 18 100 kΩ ILM 6
SS Pin Output Voltage VSS 4 V SS 6
TPS2121 Continuous Input Current IIN1, IIN2 4.5 A IN1, IN2 6
Junction temperature TJ -40 125 °C 6
Quiescent Current (INx powering OUT) IQ, INx 300 400 µA OUT = Open; -40°C to 125°C 7
Standby Current (INx not powering OUT) ISBY, INx 0 15 25 µA VOUT = VINx; 25°C 7
Standby Current (INx not powering OUT) ISBY, INx 25 µA VOUT = VINx; -40°C to 125°C 7
Leakage Current (INx to OUT) ILK, INx -1 1 µA /VINx - VOUT/ ≤ 5V; 25°C 7
Leakage Current (INx to OUT) ILK, INx -5 5 µA /VINx - VOUT/ ≤ 5V; -40°C to 85°C 7
Leakage Current (INx to OUT) ILK, INx -80 80 µA /VINx - VOUT/ ≤ 5V; -40°C to 125°C 7
Leakage Current (INx to OUT) ILK, INx -35 35 µA /VINx - VOUT/ ≤ 22V; -40°C to 85°C 7
Leakage Current (INx to OUT) ILK, INx -500 500 µA /VINx - VOUT/ ≤ 22V; -40°C to 125°C 7
Undervoltage Lockout, rising VUV, INx 2.5 2.65 2.8 V VINx Rising; -40°C to 125°C 7
Undervoltage Lockout, falling VUV, INx 2.4 2.55 2.7 V VINx Falling; -40°C to 125°C 7
Switchover Time tSW 100 µs VOUT < VINx; CP2 or SEL < VREF; -40°C to 125°C 7
Fast Switchover Time (TPS2121 only) tFSW 5 µs VOUT < VINx; CP2 ≥ VREF; -40°C to 125°C 7
Input Voltage Comparator (VIN2 referenced to VIN1) VCOMP 0 280 600 mV VIN1 ≥ VIN2; -40°C to 125°C 7
Input Voltage Comparator Hysteresis VCOMP 2.5 3.5 4.5 % VIN1 > VIN2, Falling; -40°C to 125°C 7
ON-State Resistance (TPS2121) RON 56 70 mΩ IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; 25°C 7
ON-State Resistance (TPS2121) RON 85 mΩ IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; -40°C to 85°C 7
ON-State Resistance (TPS2121) RON 90 mΩ IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; -40°C to 105°C 7
ON-State Resistance (TPS2121) RON 100 mΩ IOUT = -200 mA; VPRI > VREF; VINx ≥ 5.0 V; -40°C to 125°C 7
Output Current Limit (TPS2121) ILM 4.6 5.2 5.8 A RILM = 18.7kΩ; -40°C to 125°C 8
Output Current Limit (TPS2121) ILM 4 4.5 5 A RILM = 22.1kΩ; -40°C to 125°C 8
Output Current Limit (TPS2121) ILM 3 3.5 4 A RILM = 29.8kΩ; -40°C to 125°C 8
Output Current Limit (TPS2121) ILM 2 2.5 3 A RILM = 44.2kΩ; -40°C to 125°C 8
Output Current Limit (TPS2121) ILM 1 1.5 2 A RILM = 80kΩ; -40°C to 125°C 8
Output Current Limit (TPS2121) ILM 1.5 2.5 3.5 A RILM < 1kΩ; -40°C to 125°C 8
Current Limit Response Time tLM 250 µs Output Steady State; -40°C to 125°C 8
Internal Voltage Reference, rising VREF, x 1.01 1.06 1.1 V VPR1, VCP2, VOV1, VOV2 Rising; -40°C to 125°C 8
Internal Voltage Reference, falling VREF, x 0.99 1.04 1.09 V VPR1, VCP2, VOV1, VOV2 Falling; -40°C to 125°C 8
Comparator Offset Voltage (TPS2121 only) VOFST 5 20 40 mV VPR1 > VREF, VCP2 > VREF; -40°C to 125°C 8
Pin Leakage Current ILK, x -0.1 0.1 µA VPR1, VCP2, VOV1, VOV2 = 0 V to 5.5 V; -40°C to 125°C 8
Status Pin Leakage ILK, ST -0.1 0.1 µA VST = 0 V to 5.5 V; -40°C to 125°C 8
Status Delay L to H tST 1 µs -40°C to 125°C 8
Fast Reverse Current Detection Threshold IRCB 0.2 1 2 A VOUT > VINx; -40°C to 125°C 8
RCB Release Voltage VRCB 0 25 50 mV VOUT > VINx; -40°C to 125°C 8
Fast Reverse Current Blocking Response Time tRCB 10 µs -40°C to 125°C 8
Thermal Shutdown, rising TSD 160 °C Shutdown Rising 8
Thermal Shutdown, recovery falling TSD 150 °C Recovery Falling 8
Junction-to-ambient thermal resistance RθJA 72.2 °C/W RNW (PKG FAM) 11 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 38.5 °C/W RNW (PKG FAM) 11 pins 7
Junction-to-board thermal resistance RθJB 15.4 °C/W RNW (PKG FAM) 11 pins 7
Junction-to-top characterization parameter ΨJT 0.9 °C/W RNW (PKG FAM) 11 pins 7
Junction-to-board characterization parameter ΨJB 15.5 °C/W RNW (PKG FAM) 11 pins 7

CAD (Adom-generated)

  • Symbol: TPS2121RUXR
  • Footprint: Adom_Gen:Texas_Instruments_TPS2121_d30295
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tps2121ruxr-etched.step / tps2121ruxr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps2121ruxr.step / tps2121ruxr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 b2f5950f596dc2c4, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF