Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA2126EA

Texas Instruments · Instrumentation OpAmps · SSOP-16-150mil

INA2126EA from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V-INA power_in Negative input for amplifier A.
2 V+INA power_in Positive input for amplifier A.
3 RGA passive Gain setting pin for amplifier A; for gains greater than 5, place a gain resistor between pin 3 and pin 4.
4 RGA passive Gain setting pin for amplifier A; for gains greater than 5, place a gain resistor between pin 3 and pin 4.
5 RefA input Reference input for amplifier A, which must be driven by a low impedance or connected to ground.
6 VOA output Output of amplifier A.
7 SenseA input Feedback for amplifier A; connect to VOA, the amplifier A output.
8 V- power_in Negative supply.
9 V+ power_in Positive supply.
10 SenseB input Feedback for amplifier B; connect to VOB, the amplifier B output.
11 VOB output Output of amplifier B.
12 RefB input Reference input for amplifier B, which must be driven by a low impedance or connected to ground.
13 RGB passive Gain setting pin for amplifier B; for gains greater than 5, place a gain resistor between pin 13 and pin 14.
14 RGB passive Gain setting pin for amplifier B; for gains greater than 5, place a gain resistor between pin 13 and pin 14.
15 V+INB power_in Positive input for amplifier B.
16 V-INB power_in Negative input for amplifier B.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-16-150mil
Category Operational Amplifier/Comparator
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset voltage (RTI) VOS 150 500 µV 7
Offset voltage drift (RTI) 0.5 5 µV/°C TA = -40°C to +85°C 7
Power-supply rejection ratio (RTI) PSRR 5 50 uV/V VS = ±1.35V to ±18V 7
Common-mode voltage VCM -11.25 11.5 11.25 V 7
Common-mode rejection ratio CMRR 74 83 dB RS = 0Ω, VCM = ±11.25V 7
Input bias current IB 10 50 nA 7
Input offset current IOS 0.5 5 nA 7
Gain G 5 10000 V/V 7
Gain error GE 0.02 0.18 % G = 5, VO = ±14V 7
Gain error GE 0.2 1 % G = 100, VO = ±12V 7
Gain drift 2 10 ppm/°C TA = -40°C to +85°C; G = 5 7
Gain drift 25 100 ppm/°C TA = -40°C to +85°C; G = 100 7
Gain nonlinearity 0.002 0.012 % G = 100, VO = ±14V 7
Short-circuit current ISC -5 5 mA Continuous to VS / 2 8
Load capacitance CL 1000 pF Stable operation 8
Quiescent current (per channel) IQ 175 200 µA IO = 0mA 8
Supply voltage, single-supply (recommended) VS 2.7 30 36 V Single-supply 5
Supply voltage, dual-supply (recommended) VS 1.35 15 18 V Dual-supply (±VS) 5
Specified temperature TA -40 85 °C 5
Supply voltage, dual supply (absolute maximum) VS 18 V Dual supply, VS = (V+), (V-) 5
Supply voltage, single supply (absolute maximum) VS 36 V Single supply, VS = (V+), (V-) 5
Input signal current 10 mA 5
Operating temperature TA -55 125 °C 5
Lead temperature 300 °C Soldering, 10 s 5
Storage temperature Tstg -55 125 °C 5
Electrostatic discharge, human-body model V(ESD) 500 V HBM, per ANSI/ESDA/JEDEC JS-001 5
Junction-to-ambient thermal resistance (SSOP, 16 pins) RθJA 115.8 °C/W 6
Junction-to-case (top) thermal resistance (SSOP, 16 pins) RθJC(top) 67 °C/W 6
Junction-to-board thermal resistance (SSOP, 16 pins) RθJB 58.3 °C/W 6
Junction-to-top characterization parameter (SSOP, 16 pins) ψJT 19.9 °C/W 6
Junction-to-board characterization parameter (SSOP, 16 pins) ψJB 57.9 °C/W 6

CAD (KiCad official)

  • Symbol: INA2126EA
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: ina2126ea-etched.step / ina2126ea-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina2126ea.step / ina2126ea.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 87a7363f8c1ac57e, retrieved 2026-11-18)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF