Generated by kicad-footprint-generator · KiCad file format 20260206
INA2126EA
Texas Instruments · Instrumentation OpAmps · SSOP-16-150mil
INA2126EA from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V-INA | power_in | Negative input for amplifier A. |
| 2 | V+INA | power_in | Positive input for amplifier A. |
| 3 | RGA | passive | Gain setting pin for amplifier A; for gains greater than 5, place a gain resistor between pin 3 and pin 4. |
| 4 | RGA | passive | Gain setting pin for amplifier A; for gains greater than 5, place a gain resistor between pin 3 and pin 4. |
| 5 | RefA | input | Reference input for amplifier A, which must be driven by a low impedance or connected to ground. |
| 6 | VOA | output | Output of amplifier A. |
| 7 | SenseA | input | Feedback for amplifier A; connect to VOA, the amplifier A output. |
| 8 | V- | power_in | Negative supply. |
| 9 | V+ | power_in | Positive supply. |
| 10 | SenseB | input | Feedback for amplifier B; connect to VOB, the amplifier B output. |
| 11 | VOB | output | Output of amplifier B. |
| 12 | RefB | input | Reference input for amplifier B, which must be driven by a low impedance or connected to ground. |
| 13 | RGB | passive | Gain setting pin for amplifier B; for gains greater than 5, place a gain resistor between pin 13 and pin 14. |
| 14 | RGB | passive | Gain setting pin for amplifier B; for gains greater than 5, place a gain resistor between pin 13 and pin 14. |
| 15 | V+INB | power_in | Positive input for amplifier B. |
| 16 | V-INB | power_in | Negative input for amplifier B. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Operational Amplifier/Comparator |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset voltage (RTI) | VOS | 150 | 500 | µV | 7 | ||
| Offset voltage drift (RTI) | 0.5 | 5 | µV/°C | TA = -40°C to +85°C | 7 | ||
| Power-supply rejection ratio (RTI) | PSRR | 5 | 50 | uV/V | VS = ±1.35V to ±18V | 7 | |
| Common-mode voltage | VCM | -11.25 | 11.5 | 11.25 | V | 7 | |
| Common-mode rejection ratio | CMRR | 74 | 83 | dB | RS = 0Ω, VCM = ±11.25V | 7 | |
| Input bias current | IB | 10 | 50 | nA | 7 | ||
| Input offset current | IOS | 0.5 | 5 | nA | 7 | ||
| Gain | G | 5 | 10000 | V/V | 7 | ||
| Gain error | GE | 0.02 | 0.18 | % | G = 5, VO = ±14V | 7 | |
| Gain error | GE | 0.2 | 1 | % | G = 100, VO = ±12V | 7 | |
| Gain drift | 2 | 10 | ppm/°C | TA = -40°C to +85°C; G = 5 | 7 | ||
| Gain drift | 25 | 100 | ppm/°C | TA = -40°C to +85°C; G = 100 | 7 | ||
| Gain nonlinearity | 0.002 | 0.012 | % | G = 100, VO = ±14V | 7 | ||
| Short-circuit current | ISC | -5 | 5 | mA | Continuous to VS / 2 | 8 | |
| Load capacitance | CL | 1000 | pF | Stable operation | 8 | ||
| Quiescent current (per channel) | IQ | 175 | 200 | µA | IO = 0mA | 8 | |
| Supply voltage, single-supply (recommended) | VS | 2.7 | 30 | 36 | V | Single-supply | 5 |
| Supply voltage, dual-supply (recommended) | VS | 1.35 | 15 | 18 | V | Dual-supply (±VS) | 5 |
| Specified temperature | TA | -40 | 85 | °C | 5 | ||
| Supply voltage, dual supply (absolute maximum) | VS | 18 | V | Dual supply, VS = (V+), (V-) | 5 | ||
| Supply voltage, single supply (absolute maximum) | VS | 36 | V | Single supply, VS = (V+), (V-) | 5 | ||
| Input signal current | 10 | mA | 5 | ||||
| Operating temperature | TA | -55 | 125 | °C | 5 | ||
| Lead temperature | 300 | °C | Soldering, 10 s | 5 | |||
| Storage temperature | Tstg | -55 | 125 | °C | 5 | ||
| Electrostatic discharge, human-body model | V(ESD) | 500 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 5 | ||
| Junction-to-ambient thermal resistance (SSOP, 16 pins) | RθJA | 115.8 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance (SSOP, 16 pins) | RθJC(top) | 67 | °C/W | 6 | |||
| Junction-to-board thermal resistance (SSOP, 16 pins) | RθJB | 58.3 | °C/W | 6 | |||
| Junction-to-top characterization parameter (SSOP, 16 pins) | ψJT | 19.9 | °C/W | 6 | |||
| Junction-to-board characterization parameter (SSOP, 16 pins) | ψJB | 57.9 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
INA2126EA - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
ina2126ea-etched.step/ina2126ea-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina2126ea.step/ina2126ea.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
87a7363f8c1ac57e, retrieved 2026-11-18) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).