component
LM2662MX
Public Made by Adomby adom
Texas Instruments Charge Pumps, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2662MX
Texas Instruments · Charge Pumps · SOIC-8
LM2662MX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FC | input | Frequency control pin; tie open for 20 kHz (typical) oscillator frequency or connect to V+ for 150 kHz (typical); has no effect when OSC is externally driven. |
| 2 | CAP+ | passive | Connect to positive terminal of external charge-pump capacitor. |
| 3 | GND | power_in | Power supply ground reference (0 V). |
| 4 | CAP- | passive | Connect to negative terminal of external charge-pump capacitor. |
| 5 | OUT | power_out | Negative voltage output providing up to 200 mA with 3.5 Ω typical output resistance. |
| 6 | LV | input | Low-voltage operation control; tie to ground when input voltage is below 3.5 V; may be left open above 3.5 V or when input is regulated; must be grounded when OSC is externally driven. |
| 7 | OSC | input | Oscillator control input connected to internal 15 pF capacitance; external capacitor can be connected to adjust frequency or external clock (maximum 150 kHz) can drive this pin. |
| 8 | V+ | power_in | Power supply positive voltage input; 1.5 V to 5.5 V operating range (1.5 V to 5.5 V when LV = GND, 2.5 V to 5.5 V nominal). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LM2662MX - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm2662mx-etched.step/lm2662mx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2662mx.step/lm2662mx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
3a994b4ab387c486, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).