main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm2662mx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm2662mx: viewers · Ray
lm2662mx-etched.fit.json lm2662mx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2662mx-etched.glb lm2662mx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2662mx-etched.step lm2662mx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2662mx.glb Publish 0.1.0 · Ray
lm2662mx.kicad_mod Publish 0.1.0 · Ray
lm2662mx.kicad_sym Publish 0.1.0 · Ray
lm2662mx.lbr Publish 0.1.0 · Ray
lm2662mx.step Publish 0.1.0 · Ray
package.json lm2662mx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lm2662mx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lm2662mx · Ray

LM2662MX

Texas Instruments · Charge Pumps · SOIC-8

LM2662MX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FC input Frequency control pin; tie open for 20 kHz (typical) oscillator frequency or connect to V+ for 150 kHz (typical); has no effect when OSC is externally driven.
2 CAP+ passive Connect to positive terminal of external charge-pump capacitor.
3 GND power_in Power supply ground reference (0 V).
4 CAP- passive Connect to negative terminal of external charge-pump capacitor.
5 OUT power_out Negative voltage output providing up to 200 mA with 3.5 Ω typical output resistance.
6 LV input Low-voltage operation control; tie to ground when input voltage is below 3.5 V; may be left open above 3.5 V or when input is regulated; must be grounded when OSC is externally driven.
7 OSC input Oscillator control input connected to internal 15 pF capacitance; external capacitor can be connected to adjust frequency or external clock (maximum 150 kHz) can drive this pin.
8 V+ power_in Power supply positive voltage input; 1.5 V to 5.5 V operating range (1.5 V to 5.5 V when LV = GND, 2.5 V to 5.5 V nominal).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: LM2662MX
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm2662mx-etched.step / lm2662mx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2662mx.step / lm2662mx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 3a994b4ab387c486, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF