component
STM32F413VGT6TR
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32F413VGT6TR
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32F413VGT6TR from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant I/O with alternate functions TRACECLK, SPI4_SCK/I2S4_CK, SPI5_SCK/I2S5_CK, SAI1_MCLK_A, QUADSPI_BK1_IO2, UART10_RX, FSMC_A23 and EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V tolerant I/O with alternate functions TRACED0, SAI1_SD_B, UART10_TX, FSMC_A19 and EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V tolerant I/O with alternate functions TRACED1, SPI4_NSS/I2S4_WS, SPI5_NSS/I2S5_WS, SAI1_SD_A, DFSDM1_DATIN3, FSMC_A20 and EVENTOUT; SAI1_SD_A is swapped versus other MCUs. |
| 4 | PE5 | bidirectional | 5 V tolerant I/O with alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SPI5_MISO, SAI1_SCK_A, DFSDM1_CKIN3, FSMC_A21 and EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V tolerant I/O with alternate functions TRACED3, TIM9_CH2, SPI4_MOSI/I2S4_SD, SPI5_MOSI/I2S5_SD, SAI1_FS_A, FSMC_A22 and EVENTOUT; SAI1_FS_A is swapped versus other MCUs. |
| 6 | VBAT | power_in | Backup battery supply pin for RTC, backup registers and LSE oscillator. |
| 7 | PC13-ANTI_TAMP | bidirectional | 5 V tolerant I/O powered via the power switch (sinks only 3 mA, max 2 MHz with 30 pF load, not a current source); EVENTOUT, additional function TAMP_1. |
| 8 | PC14-OSC32_IN | bidirectional | I/O powered via the power switch (max 2 MHz, 30 pF); additional function OSC32_IN for the 32 kHz crystal, not 5 V tolerant in oscillator mode. |
| 9 | PC15-OSC32_OUT | bidirectional | I/O powered via the power switch (max 2 MHz, 30 pF); additional function OSC32_OUT for the 32 kHz crystal, not 5 V tolerant in oscillator mode. |
| 10 | VSS | power_in | Ground supply pin. |
| 11 | VDD | power_in | Digital supply pin. |
| 12 | PH0-OSC_IN | bidirectional | I/O that serves as the 4-26 MHz HSE oscillator input (OSC_IN); not 5 V tolerant in oscillator mode. |
| 13 | PH1-OSC_OUT | bidirectional | I/O that serves as the 4-26 MHz HSE oscillator output (OSC_OUT); not 5 V tolerant in oscillator mode. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | 5 V tolerant I/O with LPTIM1_IN1, DFSDM2_CKIN4, SAI1_MCLK_B, EVENTOUT; analog functions ADC1_IN10 and WKUP2. |
| 16 | PC1 | bidirectional | 5 V tolerant I/O with LPTIM1_OUT, DFSDM2_DATIN4, SAI1_SD_B, EVENTOUT; analog functions ADC1_IN11 and WKUP3. |
| 17 | PC2 | bidirectional | 5 V tolerant I/O with LPTIM1_IN2, DFSDM2_DATIN7, SPI2_MISO, I2S2ext_SD, SAI1_SCK_B, DFSDM1_CKOUT, FSMC_NWE, EVENTOUT; analog function ADC1_IN12. |
| 18 | PC3 | bidirectional | 5 V tolerant I/O with LPTIM1_ETR, DFSDM2_CKIN7, SPI2_MOSI/I2S2_SD, SAI1_FS_B, FSMC_A0, EVENTOUT; analog function ADC1_IN13. |
| 19 | VDD | power_in | Digital supply pin. |
| 20 | VSSA | power_in | Analog ground supply pin. |
| 21 | VREF+ | power_in | Positive reference voltage supply for the ADC and DACs. |
| 22 | VDDA | power_in | Analog supply pin. |
| 23 | PA0 | bidirectional | 5 V tolerant I/O with TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, EVENTOUT; analog functions ADC1_IN0 and WKUP1. |
| 24 | PA1 | bidirectional | 5 V tolerant I/O with TIM2_CH2, TIM5_CH2, SPI4_MOSI/I2S4_SD, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3, EVENTOUT; analog function ADC1_IN1. |
| 25 | PA2 | bidirectional | 5 V tolerant I/O with TIM2_CH3, TIM5_CH3, TIM9_CH1, I2S2_CKIN, USART2_TX, FSMC_D4/FSMC_DA4, EVENTOUT; analog function ADC1_IN2. |
| 26 | PA3 | bidirectional | 5 V tolerant I/O with TIM2_CH4, TIM5_CH4, TIM9_CH2, I2S2_MCK, USART2_RX, SAI1_SD_B, FSMC_D5/FSMC_DA5, EVENTOUT; analog function ADC1_IN3. |
| 27 | VSS | power_in | Ground supply pin. |
| 28 | VDD | power_in | Digital supply pin. |
| 29 | PA4 | bidirectional | 3.3 V tolerant I/O (TTa) with SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, DFSDM1_DATIN1, FSMC_D6/FSMC_DA6, EVENTOUT; analog functions ADC1_IN4 and DAC_OUT1. |
| 30 | PA5 | bidirectional | 3.3 V tolerant I/O (TTa) with TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, DFSDM1_CKIN1, FSMC_D7/FSMC_DA7, EVENTOUT; analog functions ADC1_IN5 and DAC_OUT2. |
| 31 | PA6 | bidirectional | 5 V tolerant I/O with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, I2S2_MCK, DFSDM2_CKIN1, TIM13_CH1, QUADSPI_BK2_IO0, SDIO_CMD, EVENTOUT; analog function ADC1_IN6. |
| 32 | PA7 | bidirectional | 5 V tolerant I/O with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, DFSDM2_DATIN1, TIM14_CH1, QUADSPI_BK2_IO1, EVENTOUT; analog function ADC1_IN7. |
| 33 | PC4 | bidirectional | 5 V tolerant I/O with DFSDM2_CKIN2, I2S1_MCK, QUADSPI_BK2_IO2, FSMC_NE4, EVENTOUT; analog function ADC1_IN14. |
| 34 | PC5 | bidirectional | 5 V tolerant I/O with DFSDM2_DATIN2, I2CFMP1_SMBA, USART3_RX, QUADSPI_BK2_IO3, FSMC_NOE, EVENTOUT; analog function ADC1_IN15. |
| 35 | PB0 | bidirectional | 5 V tolerant I/O with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, SPI5_SCK/I2S5_CK, EVENTOUT; analog function ADC1_IN8. |
| 36 | PB1 | bidirectional | 5 V tolerant I/O with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, SPI5_NSS/I2S5_WS, DFSDM1_DATIN0, QUADSPI_CLK, EVENTOUT; analog function ADC1_IN9. |
| 37 | PB2 | bidirectional | 5 V tolerant I/O with LPTIM1_OUT, DFSDM1_CKIN0, QUADSPI_CLK, EVENTOUT; additional function BOOT1. |
| 38 | PE7 | bidirectional | 5 V tolerant I/O with TIM1_ETR, DFSDM1_DATIN2, UART7_Rx, QUADSPI_BK2_IO0, FSMC_D4/FSMC_DA4, EVENTOUT. |
| 39 | PE8 | bidirectional | 5 V tolerant I/O with TIM1_CH1N, DFSDM1_CKIN2, UART7_Tx, QUADSPI_BK2_IO1, FSMC_D5/FSMC_DA5, EVENTOUT. |
| 40 | PE9 | bidirectional | 5 V tolerant I/O with TIM1_CH1, DFSDM1_CKOUT, QUADSPI_BK2_IO2, FSMC_D6/FSMC_DA6, EVENTOUT. |
| 41 | PE10 | bidirectional | 5 V tolerant I/O with TIM1_CH2N, DFSDM2_DATIN0, QUADSPI_BK2_IO3, FSMC_D7/FSMC_DA7, EVENTOUT. |
| 42 | PE11 | bidirectional | 5 V tolerant I/O with TIM1_CH2, DFSDM2_CKIN0, SPI4_NSS/I2S4_WS, SPI5_NSS/I2S5_WS, FSMC_D8/FSMC_DA8, EVENTOUT. |
| 43 | PE12 | bidirectional | 5 V tolerant I/O with TIM1_CH3N, DFSDM2_DATIN7, SPI4_SCK/I2S4_CK, SPI5_SCK/I2S5_CK, FSMC_D9/FSMC_DA9, EVENTOUT. |
| 44 | PE13 | bidirectional | 5 V tolerant I/O with TIM1_CH3, DFSDM2_CKIN7, SPI4_MISO, SPI5_MISO, FSMC_D10/FSMC_DA10, EVENTOUT. |
| 45 | PE14 | bidirectional | 5 V tolerant I/O with TIM1_CH4, SPI4_MOSI/I2S4_SD, SPI5_MOSI/I2S5_SD, DFSDM2_DATIN1, FSMC_D11/FSMC_DA11, EVENTOUT. |
| 46 | PE15 | bidirectional | 5 V tolerant I/O with TIM1_BKIN, DFSDM2_CKIN1, FSMC_D12/FSMC_DA12, EVENTOUT. |
| 47 | PB10 | bidirectional | 5 V tolerant I/O with I2C FM+ option, with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, I2S3_MCK, USART3_TX, I2CFMP1_SCL, DFSDM2_CKOUT, SDIO_D7, EVENTOUT. |
| 48 | VCAP_1 | passive | Connection for the 1.2 V internal regulator output external capacitor (VCAP_1). |
| 49 | VSS | power_in | Ground supply pin. |
| 50 | VDD | power_in | Digital supply pin. |
| 51 | PB12 | bidirectional | 5 V tolerant I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, SPI4_NSS/I2S4_WS, SPI3_SCK/I2S3_CK, USART3_CK, CAN2_RX, DFSDM1_DATIN1, UART5_RX, FSMC_D13/FSMC_DA13, EVENTOUT. |
| 52 | PB13 | bidirectional | 5 V tolerant I/O with TIM1_CH1N, I2CFMP1_SMBA, SPI2_SCK/I2S2_CK, SPI4_SCK/I2S4_CK, USART3_CTS, CAN2_TX, DFSDM1_CKIN1, UART5_TX, EVENTOUT. |
| 53 | PB14 | bidirectional | 5 V tolerant I/O with I2C FM+ option, with TIM1_CH2N, TIM8_CH2N, I2CFMP1_SDA, SPI2_MISO, I2S2ext_SD, USART3_RTS, DFSDM1_DATIN2, TIM12_CH1, FSMC_D0/FSMC_DA0, SDIO_D6, EVENTOUT. |
| 54 | PB15 | bidirectional | 5 V tolerant I/O with I2C FM+ option, with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, I2CFMP1_SCL, SPI2_MOSI/I2S2_SD, DFSDM1_CKIN2, TIM12_CH2, SDIO_CK, EVENTOUT. |
| 55 | PD8 | bidirectional | 5 V tolerant I/O with USART3_TX, FSMC_D13/FSMC_DA13, EVENTOUT. |
| 56 | PD9 | bidirectional | 5 V tolerant I/O with USART3_RX, FSMC_D14/FSMC_DA14, EVENTOUT. |
| 57 | PD10 | bidirectional | 5 V tolerant I/O with USART3_CK, UART4_TX (wrongly mapped here instead of PC10), FSMC_D15/FSMC_DA15, EVENTOUT. |
| 58 | PD11 | bidirectional | 5 V tolerant I/O with DFSDM2_DATIN2, I2CFMP1_SMBA, USART3_CTS, QUADSPI_BK1_IO0, FSMC_A16, EVENTOUT. |
| 59 | PD12 | bidirectional | 5 V tolerant I/O with I2C FM+ option, with TIM4_CH1, DFSDM2_CKIN2, I2CFMP1_SCL, USART3_RTS, QUADSPI_BK1_IO1, FSMC_A17, EVENTOUT. |
| 60 | PD13 | bidirectional | 5 V tolerant I/O with I2C FM+ option, with TIM4_CH2, I2CFMP1_SDA, QUADSPI_BK1_IO3, FSMC_A18, EVENTOUT. |
| 61 | PD14 | bidirectional | 5 V tolerant I/O with I2C FM+ option, with TIM4_CH3, I2CFMP1_SCL, DFSDM2_CKIN0, UART9_RX, FSMC_D0/FSMC_DA0, EVENTOUT. |
| 62 | PD15 | bidirectional | 5 V tolerant I/O with I2C FM+ option, with TIM4_CH4, I2CFMP1_SDA, DFSDM2_DATIN0, UART9_TX, FSMC_D1/FSMC_DA1, EVENTOUT. |
| 63 | PC6 | bidirectional | 5 V tolerant I/O with I2C FM+ option, with TIM3_CH1, TIM8_CH1, I2CFMP1_SCL, I2S2_MCK, DFSDM1_CKIN3, DFSDM2_DATIN6, USART6_TX, FSMC_D1/FSMC_DA1, SDIO_D6, EVENTOUT. |
| 64 | PC7 | bidirectional | 5 V tolerant I/O with I2C FM+ option, with TIM3_CH2, TIM8_CH2, I2CFMP1_SDA, SPI2_SCK/I2S2_CK, I2S3_MCK, DFSDM2_CKIN6, USART6_RX, DFSDM1_DATIN3, SDIO_D7, EVENTOUT. |
| 65 | PC8 | bidirectional | 5 V tolerant I/O with TIM3_CH3, TIM8_CH3, DFSDM2_CKIN3, USART6_CK, QUADSPI_BK1_IO2, SDIO_D0, EVENTOUT. |
| 66 | PC9 | bidirectional | 5 V tolerant I/O with MCO_2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S2_CKIN, DFSDM2_DATIN3, QUADSPI_BK1_IO0, SDIO_D1, EVENTOUT. |
| 67 | PA8 | bidirectional | 5 V tolerant I/O with MCO_1, TIM1_CH1, I2C3_SCL, DFSDM1_CKOUT, USART1_CK, UART7_RX, USB_FS_SOF, CAN3_RX, SDIO_D1, EVENTOUT. |
| 68 | PA9 | bidirectional | 5 V tolerant I/O with TIM1_CH2, DFSDM2_CKIN3, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, USB_FS_VBUS, SDIO_D2, EVENTOUT. |
| 69 | PA10 | bidirectional | 5 V tolerant I/O with TIM1_CH3, DFSDM2_DATIN3, SPI2_MOSI/I2S2_SD, SPI5_MOSI/I2S5_SD, USART1_RX, USB_FS_ID, EVENTOUT. |
| 70 | PA11 | bidirectional | 5 V tolerant I/O with TIM1_CH4, DFSDM2_CKIN5, SPI2_NSS/I2S2_WS, SPI4_MISO, USART1_CTS, USART6_TX, CAN1_RX, USB_FS_DM, UART4_RX, EVENTOUT. |
| 71 | PA12 | bidirectional | 5 V tolerant I/O with TIM1_ETR, DFSDM2_DATIN5, SPI2_MISO, SPI5_MISO, USART1_RTS, USART6_RX, CAN1_TX, USB_FS_DP, UART4_TX, EVENTOUT. |
| 72 | PA13 | bidirectional | 5 V tolerant I/O with JTMS-SWDIO debug function and EVENTOUT. |
| 73 | VCAP_2 | passive | Connection for the 1.2 V internal regulator output external capacitor (VCAP_2). |
| 74 | VSS | power_in | Ground supply pin. |
| 75 | VDD | power_in | Digital supply pin. |
| 76 | PA14 | bidirectional | 5 V tolerant I/O with JTCK-SWCLK debug function and EVENTOUT. |
| 77 | PA15 | bidirectional | 5 V tolerant I/O with JTDI, TIM2_CH1/TIM2_ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART1_TX, UART7_TX, SAI1_MCLK_A, CAN3_TX, EVENTOUT. |
| 78 | PC10 | bidirectional | 5 V tolerant I/O with DFSDM2_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, QUADSPI_BK1_IO1, SDIO_D2, EVENTOUT. |
| 79 | PC11 | bidirectional | 5 V tolerant I/O with DFSDM2_DATIN5, I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, FSMC_D2/FSMC_DA2, SDIO_D3, EVENTOUT. |
| 80 | PC12 | bidirectional | 5 V tolerant I/O with SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, FSMC_D3/FSMC_DA3, SDIO_CK, EVENTOUT. |
| 81 | PD0 | bidirectional | 5 V tolerant I/O with DFSDM2_CKIN6, CAN1_RX, UART4_RX, FSMC_D2/FSMC_DA2, EVENTOUT. |
| 82 | PD1 | bidirectional | 5 V tolerant I/O with DFSDM2_DATIN6, CAN1_TX, UART4_TX, FSMC_D3/FSMC_DA3, EVENTOUT. |
| 83 | PD2 | bidirectional | 5 V tolerant I/O with TIM3_ETR, DFSDM2_CKOUT, UART5_RX, FSMC_NWE, SDIO_CMD, EVENTOUT. |
| 84 | PD3 | bidirectional | 5 V tolerant I/O with TRACED1, SPI2_SCK/I2S2_CK, DFSDM1_DATIN0, USART2_CTS, QUADSPI_CLK, FSMC_CLK, EVENTOUT. |
| 85 | PD4 | bidirectional | 5 V tolerant I/O with DFSDM1_CKIN0, USART2_RTS, FSMC_NOE, EVENTOUT. |
| 86 | PD5 | bidirectional | 5 V tolerant I/O with DFSDM2_CKOUT, USART2_TX, FSMC_NWE, EVENTOUT. |
| 87 | PD6 | bidirectional | 5 V tolerant I/O with SPI3_MOSI/I2S3_SD, DFSDM1_DATIN1, USART2_RX, FSMC_NWAIT, EVENTOUT. |
| 88 | PD7 | bidirectional | 5 V tolerant I/O with DFSDM1_CKIN1, USART2_CK, FSMC_NE1, EVENTOUT. |
| 89 | PB3 | bidirectional | 5 V tolerant I/O with I2C FM+ option, with JTDO-SWO, TIM2_CH2, I2CFMP1_SDA, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, USART1_RX, UART7_RX, I2C2_SDA, SAI1_SD_A, CAN3_RX, EVENTOUT. |
| 90 | PB4 | bidirectional | 5 V tolerant I/O with JTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD, UART7_TX, I2C3_SDA, SAI1_SCK_A, CAN3_TX, SDIO_D0, EVENTOUT. |
| 91 | PB5 | bidirectional | 5 V tolerant I/O with LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, CAN2_RX, SAI1_FS_A, UART5_RX, SDIO_D3, EVENTOUT. |
| 92 | PB6 | bidirectional | 5 V tolerant I/O with LPTIM1_ETR, TIM4_CH1, I2C1_SCL, DFSDM2_CKIN7, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, UART5_TX, SDIO_D0, EVENTOUT. |
| 93 | PB7 | bidirectional | 5 V tolerant I/O with LPTIM1_IN2, TIM4_CH2, I2C1_SDA, DFSDM2_DATIN7, USART1_RX, FSMC_NL, EVENTOUT. |
| 94 | BOOT0 | input | Dedicated boot mode selection input pin; additional function VPP. |
| 95 | PB8 | bidirectional | 5 V tolerant I/O with LPTIM1_OUT, TIM4_CH3, TIM10_CH1, I2C1_SCL, SPI5_MOSI/I2S5_SD, DFSDM2_CKIN1, CAN1_RX, I2C3_SDA, UART5_RX, SDIO_D4, EVENTOUT. |
| 96 | PB9 | bidirectional | 5 V tolerant I/O with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, DFSDM2_DATIN1, CAN1_TX, I2C2_SDA, UART5_TX, SDIO_D5, EVENTOUT. |
| 97 | PE0 | bidirectional | 5 V tolerant I/O with TIM4_ETR, DFSDM2_CKIN4, UART8_Rx, FSMC_NBL0, EVENTOUT. |
| 98 | PE1 | bidirectional | 5 V tolerant I/O with DFSDM2_DATIN4, UART8_Tx, FSMC_NBL1, EVENTOUT. |
| 99 | VSS | power_in | Ground supply pin. |
| 100 | VDD | power_in | Digital supply pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
CAD (KiCad official)
- Symbol:
STM32F413VGT6TR - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32f413vgt6tr-etched.step/stm32f413vgt6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f413vgt6tr.step/stm32f413vgt6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (208 pp, sha256
1097a9e7a96496c5, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).