Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

REG1117-5

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-4

REG1117-5 from Texas Instruments, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin of the fixed-voltage REG1117-5 (this pin is Adj. on the adjustable model).
2 VOUT power_out Regulated 5V output (4.900V to 5.100V over load) delivering up to 800mA, and it needs an output capacitor (10µF tantalum recommended, ESR below 0.5Ω).
3 VIN power_in Unregulated input voltage, specified 6.5V to 10V for output regulation, with an absolute maximum of +15V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-223-4
Category Power Management (PMIC)
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage (REG1117-5) 4.95 5 5.05 V IO = 10mA, VIN = 7V 4
Output voltage (REG1117-5) 4.9 5 5.1 V See Note 1; IO = 0 to 800mA, VIN = 6.5V to 10V 4
Line regulation (REG1117-5) 3 10 mV IO = 0, VIN = 6.5 to 15V 4
Load regulation (REG1117-5) 3 15 mV IO = 0 to 800mA, VIN = 6.5V 4
Dropout voltage (All Models) 1 1.1 V IO = 100mA 4
Dropout voltage (All Models) 1.05 1.15 V See Note 1; IO = 500mA 4
Dropout voltage (REG1117 Models) 1.1 1.2 V IO = 800mA 4
Current limit (REG1117 Models) 800 950 1200 mA VIN − VO = 5V 5
Quiescent current (Fixed-Voltage Models) 4 10 mA VIN − VO = 5V 5
Thermal regulation (All Models) 0.01 0.1 %/W 30ms Pulse 5
Absolute maximum input voltage 15 V 2
Operating junction temperature range -40 125 °C 2
Storage temperature range -65 150 °C 2
Lead temperature (soldering) 300 °C soldering, 10s 2
Ripple rejection (All Models) 62 dB f = 120Hz, VIN − VOUT = 3V + 1VPP Ripple 5
Temperature drift (Fixed-Voltage Models) 0.5 % TJ = 0°C to +125°C 5
Long-term stability (All Models) 0.3 % TA = 125°C, 1000Hr 5
RMS output noise (All Models) 0.003 % f = 10Hz to 10kHz 5
Thermal resistance junction-to-case at tab (3-Lead SOT-223) JC 15 °C/W 3-Lead SOT-223 Surface-Mount 5
SOT-223 junction-to-ambient thermal resistance JA 46 °C/W Table 1: total board area 2500mm2, topside copper 2500mm2, backside copper 2500mm2 10
SOT-223 junction-to-ambient thermal resistance JA 47 °C/W Table 1: total board area 2500mm2, topside copper 1250mm2, backside copper 2500mm2 10
SOT-223 junction-to-ambient thermal resistance JA 49 °C/W Table 1: total board area 2500mm2, topside copper 950mm2, backside copper 2500mm2 10
SOT-223 junction-to-ambient thermal resistance JA 51 °C/W Table 1: total board area 2500mm2, topside copper 2500mm2, backside copper 0 10
SOT-223 junction-to-ambient thermal resistance JA 53 °C/W Table 1: total board area 2500mm2, topside copper 1800mm2, backside copper 0 10
SOT-223 junction-to-ambient thermal resistance JA 55 °C/W Table 1: total board area 1600mm2, topside copper 600mm2, backside copper 1600mm2 10
SOT-223 junction-to-ambient thermal resistance JA 58 °C/W Table 1: total board area 2500mm2, topside copper 1250mm2, backside copper 0 10
SOT-223 junction-to-ambient thermal resistance JA 59 °C/W Table 1: total board area 2500mm2, topside copper 915mm2, backside copper 0 10
SOT-223 junction-to-ambient thermal resistance JA 67 °C/W Table 1: total board area 1600mm2, topside copper 600mm2, backside copper 0 10
SOT-223 junction-to-ambient thermal resistance JA 72 °C/W Table 1: total board area 900mm2, topside copper 340mm2, backside copper 900mm2 10
SOT-223 junction-to-ambient thermal resistance JA 85 °C/W Table 1: total board area 900mm2, topside copper 340mm2, backside copper 0 10

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper conduction through its copper leads, especially the large 10

CAD (KiCad official)

  • Symbol: REG1117-5
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223-4 (KiCad packages3D, STEP)
  • 3D model files: reg1117-5-etched.step / reg1117-5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); reg1117-5.step / reg1117-5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 9612deef2bd34399, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF