3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownREG1117-5
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-4
REG1117-5 from Texas Instruments, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin of the fixed-voltage REG1117-5 (this pin is Adj. on the adjustable model). |
| 2 | VOUT | power_out | Regulated 5V output (4.900V to 5.100V over load) delivering up to 800mA, and it needs an output capacitor (10µF tantalum recommended, ESR below 0.5Ω). |
| 3 | VIN | power_in | Unregulated input voltage, specified 6.5V to 10V for output regulation, with an absolute maximum of +15V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-4 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (REG1117-5) | 4.95 | 5 | 5.05 | V | IO = 10mA, VIN = 7V | 4 | |
| Output voltage (REG1117-5) | 4.9 | 5 | 5.1 | V | See Note 1; IO = 0 to 800mA, VIN = 6.5V to 10V | 4 | |
| Line regulation (REG1117-5) | 3 | 10 | mV | IO = 0, VIN = 6.5 to 15V | 4 | ||
| Load regulation (REG1117-5) | 3 | 15 | mV | IO = 0 to 800mA, VIN = 6.5V | 4 | ||
| Dropout voltage (All Models) | 1 | 1.1 | V | IO = 100mA | 4 | ||
| Dropout voltage (All Models) | 1.05 | 1.15 | V | See Note 1; IO = 500mA | 4 | ||
| Dropout voltage (REG1117 Models) | 1.1 | 1.2 | V | IO = 800mA | 4 | ||
| Current limit (REG1117 Models) | 800 | 950 | 1200 | mA | VIN − VO = 5V | 5 | |
| Quiescent current (Fixed-Voltage Models) | 4 | 10 | mA | VIN − VO = 5V | 5 | ||
| Thermal regulation (All Models) | 0.01 | 0.1 | %/W | 30ms Pulse | 5 | ||
| Absolute maximum input voltage | 15 | V | 2 | ||||
| Operating junction temperature range | -40 | 125 | °C | 2 | |||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Lead temperature (soldering) | 300 | °C | soldering, 10s | 2 | |||
| Ripple rejection (All Models) | 62 | dB | f = 120Hz, VIN − VOUT = 3V + 1VPP Ripple | 5 | |||
| Temperature drift (Fixed-Voltage Models) | 0.5 | % | TJ = 0°C to +125°C | 5 | |||
| Long-term stability (All Models) | 0.3 | % | TA = 125°C, 1000Hr | 5 | |||
| RMS output noise (All Models) | 0.003 | % | f = 10Hz to 10kHz | 5 | |||
| Thermal resistance junction-to-case at tab (3-Lead SOT-223) | JC | 15 | °C/W | 3-Lead SOT-223 Surface-Mount | 5 | ||
| SOT-223 junction-to-ambient thermal resistance | JA | 46 | °C/W | Table 1: total board area 2500mm2, topside copper 2500mm2, backside copper 2500mm2 | 10 | ||
| SOT-223 junction-to-ambient thermal resistance | JA | 47 | °C/W | Table 1: total board area 2500mm2, topside copper 1250mm2, backside copper 2500mm2 | 10 | ||
| SOT-223 junction-to-ambient thermal resistance | JA | 49 | °C/W | Table 1: total board area 2500mm2, topside copper 950mm2, backside copper 2500mm2 | 10 | ||
| SOT-223 junction-to-ambient thermal resistance | JA | 51 | °C/W | Table 1: total board area 2500mm2, topside copper 2500mm2, backside copper 0 | 10 | ||
| SOT-223 junction-to-ambient thermal resistance | JA | 53 | °C/W | Table 1: total board area 2500mm2, topside copper 1800mm2, backside copper 0 | 10 | ||
| SOT-223 junction-to-ambient thermal resistance | JA | 55 | °C/W | Table 1: total board area 1600mm2, topside copper 600mm2, backside copper 1600mm2 | 10 | ||
| SOT-223 junction-to-ambient thermal resistance | JA | 58 | °C/W | Table 1: total board area 2500mm2, topside copper 1250mm2, backside copper 0 | 10 | ||
| SOT-223 junction-to-ambient thermal resistance | JA | 59 | °C/W | Table 1: total board area 2500mm2, topside copper 915mm2, backside copper 0 | 10 | ||
| SOT-223 junction-to-ambient thermal resistance | JA | 67 | °C/W | Table 1: total board area 1600mm2, topside copper 600mm2, backside copper 0 | 10 | ||
| SOT-223 junction-to-ambient thermal resistance | JA | 72 | °C/W | Table 1: total board area 900mm2, topside copper 340mm2, backside copper 900mm2 | 10 | ||
| SOT-223 junction-to-ambient thermal resistance | JA | 85 | °C/W | Table 1: total board area 900mm2, topside copper 340mm2, backside copper 0 | 10 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | conduction through its copper leads, especially the large | 10 |
CAD (KiCad official)
- Symbol:
REG1117-5 - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-4 (KiCad packages3D, STEP)
- 3D model files:
reg1117-5-etched.step/reg1117-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);reg1117-5.step/reg1117-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
9612deef2bd34399, retrieved 2026-11-13, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).