Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLVH431NQDBZRR

Nexperia · Voltage References · TO-236AB

TLVH431NQDBZRR from Nexperia, in a TO-236AB. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 REF input Reference input that sets the regulated cathode-anode voltage (Vref typically 1.24 V) via an external R1/R2 divider; reference current max 3 mA.
2 K passive Cathode of the shunt regulator, operating at VKA from Vref up to 14 V with cathode current from 0.08 mA to 70 mA.
3 A power_in Anode of the shunt regulator, connected to ground, which is also the thermal solder point (Rth(j-sp) max 50 K/W).

Key specifications

Parameter Value
Manufacturer Nexperia
Package TO-236AB
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference voltage Vref 1222 1240 1258 mV VKA = Vref; IK = 10 mA; Tamb = 25 °C 6
Reference voltage variation (Tamb -40 to 125 °C) ΔVref 5 10 mV VKA = Vref; IK = 10 mA; Tamb = -40 °C to 125 °C 6
Reference voltage variation to cathode-anode voltage variation ratio ΔVref/ΔVKA -0.8 -2.7 mV/V IK = 10 mA; ΔVKA = Vref to 14 V 6
Reference current Iref 0.19 0.3 μA IK = 10 mA; R1 = 10 kΩ; R2 = open 6
Reference current variation (Tamb -40 to 125 °C) ΔIref 0.07 0.24 μA IK = 10 mA; R1 = 10 kΩ; R2 = open; Tamb = -40 °C to 125 °C 6
Minimum cathode current IK(min) 55 80 μA VKA = Vref 6
Off-state current Ioff 0.01 0.05 μA VKA = 14 V; Vref = 0 6
Dynamic cathode-anode impedance ZKA 0.1 0.15 Ω IK = 0.1 mA to 70 mA; VKA = Vref; f < 1 kHz 6
Cathode current (recommended) IK 0.08 70 mA 5
Cathode-anode voltage (absolute max) VKA 14 V 4
Cathode current (absolute max) IK -25 80 mA 4
Reference current (absolute max) Iref 3 mA 4
Total power dissipation, FR4 standard footprint Ptot 350 mW Tamb ≤ 25 °C; FR4 PCB, single-sided copper, standard footprint 4
Total power dissipation, FR4 1 cm2 anode pad Ptot 580 mW Tamb ≤ 25 °C; FR4 PCB, mounting pad for anode 1 cm2 4
Total power dissipation, ceramic PCB Ptot 950 mW Tamb ≤ 25 °C; ceramic PCB Al2O3, standard footprint 4
Junction temperature Tj 150 °C 4
Ambient temperature Tamb -40 125 °C TLVH431NXQDBZR 4
Storage temperature Tstg -65 150 °C 4
ESD voltage, human body model VESD 4 kV MIL-STD-883 (human body model); Tamb = 25 °C 4
ESD voltage, machine model VESD 200 V machine model; Tamb = 25 °C 4
Thermal resistance junction to ambient, FR4 standard footprint Rth(j-a) 360 K/W in free air; FR4 PCB, standard footprint 5
Thermal resistance junction to ambient, FR4 1 cm2 anode pad Rth(j-a) 216 K/W in free air; FR4 PCB, mounting pad for anode 1 cm2 5
Thermal resistance junction to ambient, ceramic PCB Rth(j-a) 132 K/W in free air; ceramic PCB Al2O3, standard footprint 5
Thermal resistance junction to solder point Rth(j-sp) 50 K/W Soldering point of anode 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TLVH431NQDBZRR
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: TO-236AB, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlvh431nqdbzrr-etched.step / tlvh431nqdbzrr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlvh431nqdbzrr.step / tlvh431nqdbzrr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nexperia datasheet (17 pp, sha256 f697276a93043d84, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF