Generated by kicad-footprint-generator · KiCad file format 20260206
TLVH431NQDBZRR
Nexperia · Voltage References · TO-236AB
TLVH431NQDBZRR from Nexperia, in a TO-236AB. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input that sets the regulated cathode-anode voltage (Vref typically 1.24 V) via an external R1/R2 divider; reference current max 3 mA. |
| 2 | K | passive | Cathode of the shunt regulator, operating at VKA from Vref up to 14 V with cathode current from 0.08 mA to 70 mA. |
| 3 | A | power_in | Anode of the shunt regulator, connected to ground, which is also the thermal solder point (Rth(j-sp) max 50 K/W). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TO-236AB |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage | Vref | 1222 | 1240 | 1258 | mV | VKA = Vref; IK = 10 mA; Tamb = 25 °C | 6 |
| Reference voltage variation (Tamb -40 to 125 °C) | ΔVref | 5 | 10 | mV | VKA = Vref; IK = 10 mA; Tamb = -40 °C to 125 °C | 6 | |
| Reference voltage variation to cathode-anode voltage variation ratio | ΔVref/ΔVKA | -0.8 | -2.7 | mV/V | IK = 10 mA; ΔVKA = Vref to 14 V | 6 | |
| Reference current | Iref | 0.19 | 0.3 | μA | IK = 10 mA; R1 = 10 kΩ; R2 = open | 6 | |
| Reference current variation (Tamb -40 to 125 °C) | ΔIref | 0.07 | 0.24 | μA | IK = 10 mA; R1 = 10 kΩ; R2 = open; Tamb = -40 °C to 125 °C | 6 | |
| Minimum cathode current | IK(min) | 55 | 80 | μA | VKA = Vref | 6 | |
| Off-state current | Ioff | 0.01 | 0.05 | μA | VKA = 14 V; Vref = 0 | 6 | |
| Dynamic cathode-anode impedance | ZKA | 0.1 | 0.15 | Ω | IK = 0.1 mA to 70 mA; VKA = Vref; f < 1 kHz | 6 | |
| Cathode current (recommended) | IK | 0.08 | 70 | mA | 5 | ||
| Cathode-anode voltage (absolute max) | VKA | 14 | V | 4 | |||
| Cathode current (absolute max) | IK | -25 | 80 | mA | 4 | ||
| Reference current (absolute max) | Iref | 3 | mA | 4 | |||
| Total power dissipation, FR4 standard footprint | Ptot | 350 | mW | Tamb ≤ 25 °C; FR4 PCB, single-sided copper, standard footprint | 4 | ||
| Total power dissipation, FR4 1 cm2 anode pad | Ptot | 580 | mW | Tamb ≤ 25 °C; FR4 PCB, mounting pad for anode 1 cm2 | 4 | ||
| Total power dissipation, ceramic PCB | Ptot | 950 | mW | Tamb ≤ 25 °C; ceramic PCB Al2O3, standard footprint | 4 | ||
| Junction temperature | Tj | 150 | °C | 4 | |||
| Ambient temperature | Tamb | -40 | 125 | °C | TLVH431NXQDBZR | 4 | |
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD voltage, human body model | VESD | 4 | kV | MIL-STD-883 (human body model); Tamb = 25 °C | 4 | ||
| ESD voltage, machine model | VESD | 200 | V | machine model; Tamb = 25 °C | 4 | ||
| Thermal resistance junction to ambient, FR4 standard footprint | Rth(j-a) | 360 | K/W | in free air; FR4 PCB, standard footprint | 5 | ||
| Thermal resistance junction to ambient, FR4 1 cm2 anode pad | Rth(j-a) | 216 | K/W | in free air; FR4 PCB, mounting pad for anode 1 cm2 | 5 | ||
| Thermal resistance junction to ambient, ceramic PCB | Rth(j-a) | 132 | K/W | in free air; ceramic PCB Al2O3, standard footprint | 5 | ||
| Thermal resistance junction to solder point | Rth(j-sp) | 50 | K/W | Soldering point of anode | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TLVH431NQDBZRR - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: TO-236AB, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlvh431nqdbzrr-etched.step/tlvh431nqdbzrr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlvh431nqdbzrr.step/tlvh431nqdbzrr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (17 pp, sha256
f697276a93043d84, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).