Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RT8078AGQW

Richtek Tech · DC-DC Converters · WDFN-10(3x3)

RT8078AGQW from Richtek Tech, in a WDFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LX output Switch node that connects to the inductor; absolute maximum DC range is −0.3V to (VIN + 0.3V), and −2.5V to 9V for under 100ns.
2 LX output Switch node that connects to the inductor; absolute maximum DC range is −0.3V to (VIN + 0.3V), and −2.5V to 9V for under 100ns.
3 LX output Switch node that connects to the inductor; absolute maximum DC range is −0.3V to (VIN + 0.3V), and −2.5V to 9V for under 100ns.
4 PGOOD output Open-drain power-good output that is pulled to ground when the output is below 90% of target with 5% hysteresis, and requires an external pull-up resistor.
5 EN input Enable control that must be pulled high to turn on the device and must not be left floating; logic-high threshold is at least 1.6V and logic-low is at most 0.4V.
6 FB input Feedback input that receives the voltage from a resistive divider across the output, referenced to the 0.6V internal reference (0.594V to 0.606V).
7 NC unconnected No internal connection.
8 SVIN power_in Signal input supply, supply range 2.7V to 5.5V; decouple to GND with at least 1µF ceramic capacitor.
9 PVIN power_in Power input supply, supply range 2.7V to 5.5V; decouple to GND with at least 4.7µF ceramic capacitor.
10 PVIN power_in Power input supply, supply range 2.7V to 5.5V; decouple to GND with at least 4.7µF ceramic capacitor.
11 GND power_in Ground exposed pad that must be soldered to a large PCB and connected to GND for maximum power dissipation.

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package WDFN-10(3x3)
Category Power Management
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback Reference Voltage VREF 0.594 0.6 0.606 V 4
Feedback Leakage Current IFB 0.1 0.4 A 4
DC Bias Current (Active) 110 A Active, VFB = 0.58V, Not Switching 4
DC Bias Current (Shutdown) 1 A Shutdown 4
Output Voltage Line Regulation 0.3 %/V VIN = 2.7V to 5.5V, IOUT = 0A 4
Output Voltage Load Regulation (Note 5) 2 2 % 4
Switch Leakage Current 1 A 4
Switching Frequency 0.8 1 1.2 MHz 4
P-MOSFET Current Limit ILIM 4.4 A 4
EN Input Threshold Voltage Logic-High VIH 1.6 V 5
EN Input Threshold Voltage Logic-Low VIL 0.4 V 5
Soft-Start Time tSS 500 s 5
VOUT Over Voltage Protection (Latch-Off) 120 % Latch-Off, Delay Time = 10s 5
Power Good Hysteresis 5 % 5
Power Good Threshold 90 % Measured FB, With Respect to VREF 5
VOUT Under Voltage Lock Out (Latch-Off) 33 % 5
Switch On Resistance, High RDS(ON)_P 69 m 4
Switch On Resistance, Low RDS(ON)_N 49 m 4
Under Voltage Lockout Threshold (Rising) VUVLO 2.4 V VIN Rising 4
Under Voltage Lockout Threshold (Falling) VUVLO 2.2 V VIN Falling 4
EN Pull Low Resistance 500 k 5
Over Temperature Protection TSD 150 C 5
Over Temperature Protection Hysteresis TSD 20 C 5
VOUT Discharge Resistance 100 5
Supply Input Voltage (PVIN, SVIN) 2.7 5.5 V 4
Junction Temperature Range TJ -10 105 °C 4
Supply Input Voltage (PVIN, SVIN) -0.3 6.5 V 4
LX Pin Voltage (DC) -0.3 V 4
LX Pin Voltage (< 100ns) -2.5 9 V < 100ns 4
Other I/O Pin Voltage -0.3 6.5 V 4
Power Dissipation WDFN-10L 3x3 PD 1.429 W TA = 25°C 4
Lead Temperature (Soldering) 260 °C Soldering, 10 sec. 4
Junction Temperature TJ 150 °C 4
Storage Temperature Range TSTG -65 150 °C 4
ESD Susceptibility HBM 2 kV 4
ESD Susceptibility MM 200 V 4
Package Thermal Resistance, Junction-to-Ambient (WDFN-10L 3x3) θJA 70 °C/W 4
Package Thermal Resistance, Junction-to-Case (WDFN-10L 3x3) θJC 8.2 °C/W 4

CAD (KiCad official)

  • Symbol: RT8078AGQW
  • Footprint: Package_DFN_QFN:WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm
  • 3D model: WDFN-10(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (12 pp, sha256 15ad0b0c6d937214, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF