Generated by kicad-footprint-generator · KiCad file format 20260206
RT8078AGQW
Richtek Tech · DC-DC Converters · WDFN-10(3x3)
RT8078AGQW from Richtek Tech, in a WDFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Switch node that connects to the inductor; absolute maximum DC range is −0.3V to (VIN + 0.3V), and −2.5V to 9V for under 100ns. |
| 2 | LX | output | Switch node that connects to the inductor; absolute maximum DC range is −0.3V to (VIN + 0.3V), and −2.5V to 9V for under 100ns. |
| 3 | LX | output | Switch node that connects to the inductor; absolute maximum DC range is −0.3V to (VIN + 0.3V), and −2.5V to 9V for under 100ns. |
| 4 | PGOOD | output | Open-drain power-good output that is pulled to ground when the output is below 90% of target with 5% hysteresis, and requires an external pull-up resistor. |
| 5 | EN | input | Enable control that must be pulled high to turn on the device and must not be left floating; logic-high threshold is at least 1.6V and logic-low is at most 0.4V. |
| 6 | FB | input | Feedback input that receives the voltage from a resistive divider across the output, referenced to the 0.6V internal reference (0.594V to 0.606V). |
| 7 | NC | unconnected | No internal connection. |
| 8 | SVIN | power_in | Signal input supply, supply range 2.7V to 5.5V; decouple to GND with at least 1µF ceramic capacitor. |
| 9 | PVIN | power_in | Power input supply, supply range 2.7V to 5.5V; decouple to GND with at least 4.7µF ceramic capacitor. |
| 10 | PVIN | power_in | Power input supply, supply range 2.7V to 5.5V; decouple to GND with at least 4.7µF ceramic capacitor. |
| 11 | GND | power_in | Ground exposed pad that must be soldered to a large PCB and connected to GND for maximum power dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | WDFN-10(3x3) |
| Category | Power Management |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Reference Voltage | VREF | 0.594 | 0.6 | 0.606 | V | 4 | |
| Feedback Leakage Current | IFB | 0.1 | 0.4 | A | 4 | ||
| DC Bias Current (Active) | 110 | A | Active, VFB = 0.58V, Not Switching | 4 | |||
| DC Bias Current (Shutdown) | 1 | A | Shutdown | 4 | |||
| Output Voltage Line Regulation | 0.3 | %/V | VIN = 2.7V to 5.5V, IOUT = 0A | 4 | |||
| Output Voltage Load Regulation (Note 5) | 2 | 2 | % | 4 | |||
| Switch Leakage Current | 1 | A | 4 | ||||
| Switching Frequency | 0.8 | 1 | 1.2 | MHz | 4 | ||
| P-MOSFET Current Limit | ILIM | 4.4 | A | 4 | |||
| EN Input Threshold Voltage Logic-High | VIH | 1.6 | V | 5 | |||
| EN Input Threshold Voltage Logic-Low | VIL | 0.4 | V | 5 | |||
| Soft-Start Time | tSS | 500 | s | 5 | |||
| VOUT Over Voltage Protection (Latch-Off) | 120 | % | Latch-Off, Delay Time = 10s | 5 | |||
| Power Good Hysteresis | 5 | % | 5 | ||||
| Power Good Threshold | 90 | % | Measured FB, With Respect to VREF | 5 | |||
| VOUT Under Voltage Lock Out (Latch-Off) | 33 | % | 5 | ||||
| Switch On Resistance, High | RDS(ON)_P | 69 | m | 4 | |||
| Switch On Resistance, Low | RDS(ON)_N | 49 | m | 4 | |||
| Under Voltage Lockout Threshold (Rising) | VUVLO | 2.4 | V | VIN Rising | 4 | ||
| Under Voltage Lockout Threshold (Falling) | VUVLO | 2.2 | V | VIN Falling | 4 | ||
| EN Pull Low Resistance | 500 | k | 5 | ||||
| Over Temperature Protection | TSD | 150 | C | 5 | |||
| Over Temperature Protection Hysteresis | TSD | 20 | C | 5 | |||
| VOUT Discharge Resistance | 100 | 5 | |||||
| Supply Input Voltage (PVIN, SVIN) | 2.7 | 5.5 | V | 4 | |||
| Junction Temperature Range | TJ | -10 | 105 | °C | 4 | ||
| Supply Input Voltage (PVIN, SVIN) | -0.3 | 6.5 | V | 4 | |||
| LX Pin Voltage (DC) | -0.3 | V | 4 | ||||
| LX Pin Voltage (< 100ns) | -2.5 | 9 | V | < 100ns | 4 | ||
| Other I/O Pin Voltage | -0.3 | 6.5 | V | 4 | |||
| Power Dissipation WDFN-10L 3x3 | PD | 1.429 | W | TA = 25°C | 4 | ||
| Lead Temperature (Soldering) | 260 | °C | Soldering, 10 sec. | 4 | |||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| ESD Susceptibility HBM | 2 | kV | 4 | ||||
| ESD Susceptibility MM | 200 | V | 4 | ||||
| Package Thermal Resistance, Junction-to-Ambient (WDFN-10L 3x3) | θJA | 70 | °C/W | 4 | |||
| Package Thermal Resistance, Junction-to-Case (WDFN-10L 3x3) | θJC | 8.2 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
RT8078AGQW - Footprint:
Package_DFN_QFN:WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm - 3D model: WDFN-10(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (12 pp, sha256
15ad0b0c6d937214, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).