Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FM2201D

Shenzhen Fuman · Battery Management ICs · DFN-8(2x2)

FM2201D from Shenzhen Fuman, in a DFN-8(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LX output Switching node of the internal P-MOS/N-MOS DC/DC converter, with an absolute maximum voltage of VBAT ±0.3 V.
2 GND power_in Ground reference pin for the device.
3 PROG input Charge current setting pin: a 1% resistor from PROG to GND sets the charge current (battery current is 800 times the PROG current), PROG input voltage limit is VP ±0.3 V, and leaving it floating gives 450 mA.
4 NC unconnected Not connected; floating with no internal bond wire.
5 VLED output Open-drain charge status indicator output that drives an external LED, with an input voltage limit of -0.3 to +6.0 V and a high-impedance state in DC/DC mode.
6 VP power_in Charger input and load connection pin, with a charger voltage range of 4.5 V to 5.5 V, an absolute maximum input of -0.3 to +6.0 V, and a 1.5 V regulated output in DC/DC mode.
7 NC unconnected Not connected; floating with no internal bond wire.
8 VBAT power_in Single-cell Li-ion battery connection, with a VBAT input voltage range of 2.8 V to 5.5 V and an absolute maximum of -0.3 to +6.0 V.

Key specifications

Parameter Value
Manufacturer Shenzhen Fuman
Package DFN-8(2x2)
Category Power Management
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VBAT input voltage VBAT 2.8 5.5 V 3
VP output voltage Vout 1.5 V 3
VP supply voltage VVP 4.5 5.5 V 3
Overdischarge protection voltage VOD 2.72 2.8 2.88 V VBAT falling 3
Overdischarge protection delay time TOD 80 100 120 ms VBAT=3.6V 2.0V 3
Full charge voltage VREG 4.158 4.2 4.242 V RPROG=10K, IVBAT=40mA 3
LX leakage current ILKG 1 μA VOUT=VLX=2.0V 3
LX leakage current ILKG -1 μA VBAT=2.0V, VLX=0 3
VBAT battery current, charge end IVBAT -1 μA charge end, VBAT>VREG 3
VBAT battery current, shutdown IVBAT -1 μA shutdown mode (RPROG not connected), VBAT=1.5V~4.2V 3
Absolute maximum VBAT, VP, VLED input voltage -0.3 6 V 2
Storage temperature -50 150 ℃ 2
Operating junction temperature range -40 150 ℃ 2
HBM ESD rating 4000 V HBM 2
MM ESD rating 200 V MM 2
Maximum output current IO_MAX 2 A 3
Efficiency η 91 % 3
Quiescent operating current IQ 13 μA IVP=0mA 3
Current limit ILIM 2.5 A 3
Switching frequency fS 1.2 MHz 3
P-MOS on-resistance R-PON 0.12 Ω VBAT=3.6V, ILX=200mA 3
N-MOS on-resistance R-NON 0.12 Ω VBAT=3.6V, ILX=200mA 3
Soft-start time TSS 120 us 3
Overdischarge operating current ISLEEP 30 nA VBAT=2.0V 3
Output short-circuit voltage threshold VSHORT 0.2 V 3
Charger overvoltage protection threshold VVP-OVH 5.8 V 3
Charger overvoltage recovery threshold VVP-OVL 5.5 V 3
VP input voltage charge threshold, rising VUVH 3.8 V 3
VP input voltage charge threshold, falling VUVL 3.6 V 3
VP operating current, charging IVP 300 μA charging, RPROG=10K 3
VP operating current, charge end IVP 300 μA charge end, VBAT>VREG 3
Constant charge current ICHG 800 mA VBAT=3.6V, RPROG=1K 3
Constant charge current ICHG 450 mA VBAT=3.6V, RPROG floating 3
Trickle charge threshold voltage VPREL 2.8 V 4
Precharge threshold voltage VPREH 3 V 3
Output current setting voltage VPROG 1 V 4
Output current setting factor KSET 800 4
VLED current-limit resistor RVLED 0 Ω 4
Charge end delay time TTERM 2 ms 4
PROG pull-up current IPROG 1 μA 4
Regulator PMOS on-resistance RON 1 Ω IVBAT=100mA, VVP=4.2V 4
VVP-VBAT undervoltage lockout threshold, rising VASDH 100 mV VCC low to high 4
VVP-VBAT undervoltage lockout threshold, falling VASDL 30 mV VCC high to low 4
Overtemperature protection threshold TOTP 150 ℃ 4
Overtemperature protection recovery hysteresis TOTP-HYS 40 ℃ 4

CAD (KiCad official)

  • Symbol: FM2201D
  • Footprint: Package_DFN_QFN:DFN-8_2x2mm_P0.5mm
  • 3D model: DFN-8(2x2) (KiCad packages3D, STEP)
  • 3D model files: fm2201d-etched.step / fm2201d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fm2201d.step / fm2201d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shenzhen Fuman datasheet (7 pp, sha256 55b85d25d14b2bf1, retrieved 2026-11-02, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF