Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TCN75AVUA713

Microchip Tech · Temperature Sensors · MSOP-8

TCN75AVUA713 from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDA bidirectional Bidirectional serial data pin that transmits data to and from the host controller and requires a pull-up resistor to output data.
2 SCL input Serial clock input generated by the host controller, to which all communication and timing is relative.
3 ALERT output Open-drain temperature alert output that signals when the ambient temperature goes beyond the user-programmed limit.
4 GND power_in System ground pin.
5 A2 input Address select input (bit 2), a least significant bit of the slave address 1001xxx.
6 A1 input Address select input (bit 1), a least significant bit of the slave address 1001xxx.
7 A0 input Address select input (bit 0), a least significant bit of the slave address 1001xxx.
8 VDD power_in Power supply input, operating voltage range 2.7V to 5.5V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VDD 2.7 5.5 V 3
Operating Current IDD 200 500 µA Continuous operation 3
Shutdown Current ISHDN 0.1 2 µA Shutdown mode 3
Temperature Sensor Accuracy TACY -2 1 2 °C TA = -40°C to +125°C, VDD = 3.3V (typ printed ±1) 3
Alert High-level Current IOH 1 µA VOH = 5V 3
Alert Low-level Voltage VOL 0.4 V IOL= 3 mA 3
Input High-level Voltage VIH 0.7 VDD SCL, SDA, A0, A1, A2 4
Input Low-level Voltage VIL 0.3 VDD SCL, SDA, A0, A1, A2 4
Input Current IIN -1 1 µA SCL, SDA, A0, A1, A2 4
SDA Low-level Voltage VOL 0.4 V IOL= 3 mA 4
SDA High-level Current IOH 1 µA VOH = 5V 4
SDA Low-level Current IOL 6 mA VOL = 0.6V 4
SDA and SCL Input Hysteresis VHYST 0.05 VDD 4
Specified Temperature Range TA -40 125 °C Note 1 4
Operating Temperature Range TA -40 125 °C 4
Storage Temperature Range TA -65 150 °C 4
Serial Port Frequency fSC 0 400 kHz CL = 80 pF 5
Clock Period tSC 2.5 µs CL = 80 pF 5
Low Clock tLOW 1.3 µs CL = 80 pF 5
High Clock tHIGH 0.6 µs CL = 80 pF 5
Rise Time tR 20 300 ns 10% to 90% of VDD (SCL, SDA) 5
Fall Time tF 20 300 ns 90% to 10% of VDD (SCL, SDA) 5
Data Setup Before SCL High tSU-DATA 0.1 µs 5
Data Hold After SCL Low tH-DATA 0 µs 5
Start Condition Setup Time tSU-START 0.6 µs 5
Start Condition Hold Time tH-START 0.6 µs 5
Stop Condition Setup Time tSU-STOP 0.6 µs 5
Bus Idle tB-FREE 1.3 µs 5
Supply Voltage VDD 6 V 3
Voltage at all Input/Output pins -0.3 5.5 V GND, 0.3V to 5.5V 3
Storage temperature -65 150 °C 3
Ambient temp. with power applied -55 125 °C 3
Junction Temperature TJ 150 °C 3
Latch-up current at each pin -200 200 mA 3
ESD protection HBM 4 kV all pins, HBM 3
ESD protection MM 400 V all pins, MM 3
Thermal Resistance, 8L-MSOP θJA 206 °C/W 4
POR Threshold VPOR 1.7 V VDD falling edge 3
Line Regulation °C/VDD 0.2 °C/V VDD = 2.7V to 5.5V 3
Conversion Time 0.5°C Resolution tCONV 30 ms 33 samples/sec (typical) 3
Conversion Time 0.25°C Resolution tCONV 60 ms 17 samples/sec (typical) 3
Conversion Time 0.125°C Resolution tCONV 120 ms 8 samples/sec (typical) 3
Conversion Time 0.0625°C Resolution tCONV 240 ms 4 samples/sec (typical) 3
Response Time tRES 1.4 s Time to 63% (89°C) 27°C (air) to 125°C (oil bath) 3
Input Capacitance CIN 10 pF 4

CAD (KiCad official)

  • Symbol: TCN75AVUA713
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: tcn75avua713-etched.step / tcn75avua713-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tcn75avua713.step / tcn75avua713.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (40 pp, sha256 3ad94506289023c4, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF