Generated by kicad-footprint-generator · KiCad file format 20260206
TCN75AVUA713
Microchip Tech · Temperature Sensors · MSOP-8
TCN75AVUA713 from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDA | bidirectional | Bidirectional serial data pin that transmits data to and from the host controller and requires a pull-up resistor to output data. |
| 2 | SCL | input | Serial clock input generated by the host controller, to which all communication and timing is relative. |
| 3 | ALERT | output | Open-drain temperature alert output that signals when the ambient temperature goes beyond the user-programmed limit. |
| 4 | GND | power_in | System ground pin. |
| 5 | A2 | input | Address select input (bit 2), a least significant bit of the slave address 1001xxx. |
| 6 | A1 | input | Address select input (bit 1), a least significant bit of the slave address 1001xxx. |
| 7 | A0 | input | Address select input (bit 0), a least significant bit of the slave address 1001xxx. |
| 8 | VDD | power_in | Power supply input, operating voltage range 2.7V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 2.7 | 5.5 | V | 3 | ||
| Operating Current | IDD | 200 | 500 | µA | Continuous operation | 3 | |
| Shutdown Current | ISHDN | 0.1 | 2 | µA | Shutdown mode | 3 | |
| Temperature Sensor Accuracy | TACY | -2 | 1 | 2 | °C | TA = -40°C to +125°C, VDD = 3.3V (typ printed ±1) | 3 |
| Alert High-level Current | IOH | 1 | µA | VOH = 5V | 3 | ||
| Alert Low-level Voltage | VOL | 0.4 | V | IOL= 3 mA | 3 | ||
| Input High-level Voltage | VIH | 0.7 | VDD | SCL, SDA, A0, A1, A2 | 4 | ||
| Input Low-level Voltage | VIL | 0.3 | VDD | SCL, SDA, A0, A1, A2 | 4 | ||
| Input Current | IIN | -1 | 1 | µA | SCL, SDA, A0, A1, A2 | 4 | |
| SDA Low-level Voltage | VOL | 0.4 | V | IOL= 3 mA | 4 | ||
| SDA High-level Current | IOH | 1 | µA | VOH = 5V | 4 | ||
| SDA Low-level Current | IOL | 6 | mA | VOL = 0.6V | 4 | ||
| SDA and SCL Input Hysteresis | VHYST | 0.05 | VDD | 4 | |||
| Specified Temperature Range | TA | -40 | 125 | °C | Note 1 | 4 | |
| Operating Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Serial Port Frequency | fSC | 0 | 400 | kHz | CL = 80 pF | 5 | |
| Clock Period | tSC | 2.5 | µs | CL = 80 pF | 5 | ||
| Low Clock | tLOW | 1.3 | µs | CL = 80 pF | 5 | ||
| High Clock | tHIGH | 0.6 | µs | CL = 80 pF | 5 | ||
| Rise Time | tR | 20 | 300 | ns | 10% to 90% of VDD (SCL, SDA) | 5 | |
| Fall Time | tF | 20 | 300 | ns | 90% to 10% of VDD (SCL, SDA) | 5 | |
| Data Setup Before SCL High | tSU-DATA | 0.1 | µs | 5 | |||
| Data Hold After SCL Low | tH-DATA | 0 | µs | 5 | |||
| Start Condition Setup Time | tSU-START | 0.6 | µs | 5 | |||
| Start Condition Hold Time | tH-START | 0.6 | µs | 5 | |||
| Stop Condition Setup Time | tSU-STOP | 0.6 | µs | 5 | |||
| Bus Idle | tB-FREE | 1.3 | µs | 5 | |||
| Supply Voltage | VDD | 6 | V | 3 | |||
| Voltage at all Input/Output pins | -0.3 | 5.5 | V | GND, 0.3V to 5.5V | 3 | ||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temp. with power applied | -55 | 125 | °C | 3 | |||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Latch-up current at each pin | -200 | 200 | mA | 3 | |||
| ESD protection HBM | 4 | kV | all pins, HBM | 3 | |||
| ESD protection MM | 400 | V | all pins, MM | 3 | |||
| Thermal Resistance, 8L-MSOP | θJA | 206 | °C/W | 4 | |||
| POR Threshold | VPOR | 1.7 | V | VDD falling edge | 3 | ||
| Line Regulation | °C/VDD | 0.2 | °C/V | VDD = 2.7V to 5.5V | 3 | ||
| Conversion Time 0.5°C Resolution | tCONV | 30 | ms | 33 samples/sec (typical) | 3 | ||
| Conversion Time 0.25°C Resolution | tCONV | 60 | ms | 17 samples/sec (typical) | 3 | ||
| Conversion Time 0.125°C Resolution | tCONV | 120 | ms | 8 samples/sec (typical) | 3 | ||
| Conversion Time 0.0625°C Resolution | tCONV | 240 | ms | 4 samples/sec (typical) | 3 | ||
| Response Time | tRES | 1.4 | s | Time to 63% (89°C) 27°C (air) to 125°C (oil bath) | 3 | ||
| Input Capacitance | CIN | 10 | pF | 4 |
CAD (KiCad official)
- Symbol:
TCN75AVUA713 - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tcn75avua713-etched.step/tcn75avua713-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tcn75avua713.step/tcn75avua713.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (40 pp, sha256
3ad94506289023c4, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).