3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2903HYDT
STMicroelectronics · Comparators · SO-8
LM2903HYDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output 1 | output | Output 1 of dual comparator with low saturation voltage of 250 mV typ. at 4 mA sink current and TTL/CMOS compatibility. |
| 2 | Inverting input 1 | input | Inverting input of comparator 1 with input offset current 5 nA typ., input bias current 25 nA typ., and common-mode range 0 to (VCC+) - 1.5 V. |
| 3 | Non-inverting input 1 | input | Non-inverting input of comparator 1 with input offset current 5 nA typ., input bias current 25 nA typ., and common-mode range 0 to (VCC+) - 1.5 V. |
| 4 | VCC- | power_in | Negative supply voltage, ground in single supply mode or negative supply in dual supply mode. |
| 5 | Non-inverting input 2 | input | Non-inverting input of comparator 2 with input offset current 5 nA typ., input bias current 25 nA typ., and common-mode range 0 to (VCC+) - 1.5 V. |
| 6 | Inverting input 2 | input | Inverting input of comparator 2 with input offset current 5 nA typ., input bias current 25 nA typ., and common-mode range 0 to (VCC+) - 1.5 V. |
| 7 | Output 2 | output | Output 2 of dual comparator with low saturation voltage of 250 mV typ. at 4 mA sink current and TTL/CMOS compatibility. |
| 8 | VCC+ | power_in | Positive supply voltage with range 2 V to 36 V for single supply or ±1 V to ±18 V for dual supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (single supply) | VCC+ | 2 | 36 | V | Operating supply voltage | 3 | |
| Operating free-air temperature range | Toper | -40 | 150 | °C | 3 | ||
| Input common mode voltage range, lower limit | Vicm | 0 | V | VCC = 30 V, Tamb = 25 °C; upper end (VCC+) - 1.5 V | 3 | ||
| Input common mode voltage range, lower limit, Tmin to Tmax | Vicm | 0 | V | VCC = 30 V, Tmin ≤ Tamb ≤ Tmax; upper end (VCC+) - 2 V | 3 | ||
| Supply voltage, single supply | VCC | 36 | V | Single supply | 3 | ||
| Supply voltage, dual supply | VCC | -18 | 18 | V | Dual supply, printed as ±18 V | 3 | |
| Differential input voltage | Vid | -36 | 36 | V | 3 | ||
| Input voltage | Vin | -0.3 | 36 | V | 3 | ||
| Output short-circuit to ground | 20 | mA | Short-circuit from output to VCC+ | 3 | |||
| Maximum junction temperature | Tj | 160 | °C | 3 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| ESD human body model | HBM | 800 | V | Human body model, 100 pF through 1.5 kΩ | 3 | ||
| ESD machine model | MM | 200 | V | Machine model, 200 pF | 3 | ||
| ESD charged device model | CDM | 1500 | V | Charged device model | 3 | ||
| Thermal resistance junction to ambient, SO8 | Rthja | 125 | °C/W | SO8 package | 3 | ||
| Thermal resistance junction to case, SO8 | Rthjc | 40 | °C/W | SO8 package | 3 | ||
| Input offset voltage | Vio | 1 | 7 | mV | VCC+ = 5 V, VCC- = GND, Tamb = 25 °C | 5 | |
| Input offset voltage, Tmin to Tmax | Vio | 15 | mV | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input offset current | Iio | 5 | 50 | nA | VCC+ = 5 V, Tamb = 25 °C | 5 | |
| Input offset current, Tmin to Tmax | Iio | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input bias current | Iib | 25 | 250 | nA | VCC+ = 5 V, Tamb = 25 °C | 5 | |
| Input bias current, Tmin to Tmax | Iib | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Large signal voltage gain | AVD | 25 | 200 | V/mV | VCC+ = 15 V, RL = 15 kΩ, Vo = 1 to 11 V | 5 | |
| Supply current, all comparators, 5 V | ICC | 0.4 | 1 | mA | VCC+ = 5 V, no load | 5 | |
| Supply current, all comparators, 30 V | ICC | 1 | 2.5 | mA | VCC+ = 30 V, no load | 5 | |
| Low level output voltage | VOL | 250 | 400 | mV | Vid = -1 V, Isink = 4 mA | 5 | |
| Low level output voltage, Tmin to Tmax | VOL | 800 | mV | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| High level output current | IOH | 0.1 | nA | VCC+ = Vo = 30 V, Vid = 1 V | 5 | ||
| High level output current, Tmin to Tmax | IOH | 1 | µA | VCC+ = Vo = 30 V, Vid = 1 V, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Output sink current | Isink | 6 | 16 | mA | Vid = -1 V, Vo = 1.5 V | 5 | |
| Output sink current, Tmin to Tmax | Isink | 2 | mA | Vid = -1 V, Vo = 1.5 V, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Small signal response time | tre | 1.3 | µs | RL = 5.1 kΩ to VCC+, 100 mV input step, 5 mV overdrive | 5 | ||
| Large signal response time | trel | 500 | ns | TTL input, Vref = 1.4 V, RL = 5.1 kΩ to VCC+, output at 50 % of final value | 5 | ||
| Large signal response time | trel | 1 | µs | TTL input, Vref = 1.4 V, RL = 5.1 kΩ to VCC+, output at 50 % of final value | 5 |
CAD (KiCad official)
- Symbol:
LM2903HYDT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lm2903hydt-etched.step/lm2903hydt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2903hydt.step/lm2903hydt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (12 pp, sha256
0b09ac160bc2c18e, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).