Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2903HYDT

STMicroelectronics · Comparators · SO-8

LM2903HYDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Output 1 output Output 1 of dual comparator with low saturation voltage of 250 mV typ. at 4 mA sink current and TTL/CMOS compatibility.
2 Inverting input 1 input Inverting input of comparator 1 with input offset current 5 nA typ., input bias current 25 nA typ., and common-mode range 0 to (VCC+) - 1.5 V.
3 Non-inverting input 1 input Non-inverting input of comparator 1 with input offset current 5 nA typ., input bias current 25 nA typ., and common-mode range 0 to (VCC+) - 1.5 V.
4 VCC- power_in Negative supply voltage, ground in single supply mode or negative supply in dual supply mode.
5 Non-inverting input 2 input Non-inverting input of comparator 2 with input offset current 5 nA typ., input bias current 25 nA typ., and common-mode range 0 to (VCC+) - 1.5 V.
6 Inverting input 2 input Inverting input of comparator 2 with input offset current 5 nA typ., input bias current 25 nA typ., and common-mode range 0 to (VCC+) - 1.5 V.
7 Output 2 output Output 2 of dual comparator with low saturation voltage of 250 mV typ. at 4 mA sink current and TTL/CMOS compatibility.
8 VCC+ power_in Positive supply voltage with range 2 V to 36 V for single supply or ±1 V to ±18 V for dual supply.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (single supply) VCC+ 2 36 V Operating supply voltage 3
Operating free-air temperature range Toper -40 150 °C 3
Input common mode voltage range, lower limit Vicm 0 V VCC = 30 V, Tamb = 25 °C; upper end (VCC+) - 1.5 V 3
Input common mode voltage range, lower limit, Tmin to Tmax Vicm 0 V VCC = 30 V, Tmin ≤ Tamb ≤ Tmax; upper end (VCC+) - 2 V 3
Supply voltage, single supply VCC 36 V Single supply 3
Supply voltage, dual supply VCC -18 18 V Dual supply, printed as ±18 V 3
Differential input voltage Vid -36 36 V 3
Input voltage Vin -0.3 36 V 3
Output short-circuit to ground 20 mA Short-circuit from output to VCC+ 3
Maximum junction temperature Tj 160 °C 3
Storage temperature range Tstg -65 150 °C 3
ESD human body model HBM 800 V Human body model, 100 pF through 1.5 kΩ 3
ESD machine model MM 200 V Machine model, 200 pF 3
ESD charged device model CDM 1500 V Charged device model 3
Thermal resistance junction to ambient, SO8 Rthja 125 °C/W SO8 package 3
Thermal resistance junction to case, SO8 Rthjc 40 °C/W SO8 package 3
Input offset voltage Vio 1 7 mV VCC+ = 5 V, VCC- = GND, Tamb = 25 °C 5
Input offset voltage, Tmin to Tmax Vio 15 mV Tmin ≤ Tamb ≤ Tmax 5
Input offset current Iio 5 50 nA VCC+ = 5 V, Tamb = 25 °C 5
Input offset current, Tmin to Tmax Iio 150 nA Tmin ≤ Tamb ≤ Tmax 5
Input bias current Iib 25 250 nA VCC+ = 5 V, Tamb = 25 °C 5
Input bias current, Tmin to Tmax Iib 400 nA Tmin ≤ Tamb ≤ Tmax 5
Large signal voltage gain AVD 25 200 V/mV VCC+ = 15 V, RL = 15 kΩ, Vo = 1 to 11 V 5
Supply current, all comparators, 5 V ICC 0.4 1 mA VCC+ = 5 V, no load 5
Supply current, all comparators, 30 V ICC 1 2.5 mA VCC+ = 30 V, no load 5
Low level output voltage VOL 250 400 mV Vid = -1 V, Isink = 4 mA 5
Low level output voltage, Tmin to Tmax VOL 800 mV Tmin ≤ Tamb ≤ Tmax 5
High level output current IOH 0.1 nA VCC+ = Vo = 30 V, Vid = 1 V 5
High level output current, Tmin to Tmax IOH 1 µA VCC+ = Vo = 30 V, Vid = 1 V, Tmin ≤ Tamb ≤ Tmax 5
Output sink current Isink 6 16 mA Vid = -1 V, Vo = 1.5 V 5
Output sink current, Tmin to Tmax Isink 2 mA Vid = -1 V, Vo = 1.5 V, Tmin ≤ Tamb ≤ Tmax 5
Small signal response time tre 1.3 µs RL = 5.1 kΩ to VCC+, 100 mV input step, 5 mV overdrive 5
Large signal response time trel 500 ns TTL input, Vref = 1.4 V, RL = 5.1 kΩ to VCC+, output at 50 % of final value 5
Large signal response time trel 1 µs TTL input, Vref = 1.4 V, RL = 5.1 kΩ to VCC+, output at 50 % of final value 5

CAD (KiCad official)

  • Symbol: LM2903HYDT
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lm2903hydt-etched.step / lm2903hydt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2903hydt.step / lm2903hydt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (12 pp, sha256 0b09ac160bc2c18e, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF