Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMR36510FADDAR

Texas Instruments · DC-DC Converters · ESOP-8

LMR36510FADDAR from Texas Instruments, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power and analog ground terminal serving as ground reference for all electrical parameters and internal reference and logic circuits.
2 VIN power_in Input power supply with operating range 4.2V to 65V; requires quality bypass capacitors connected directly to this pin and PGND.
3 EN input Enable input with precision thresholds for device control: high level (≥ VEN-H = 1.157V) enables operation, low level (≤ VEN-L) disables; can connect directly to VIN but must not float.
4 PG output Open-drain power good flag output: high indicates normal output (FB ≥ 95%), low indicates fault or EN disabled; requires external pull-up; can be left open if unused.
5 FB input Feedback input regulated to 1V ± 1.5% nominal by internal error amplifier; connect to resistive divider tap of output voltage; must not be left floating.
6 VCC power_out Internal 5V LDO output (4.75V to 5.25V nominal) supplying control circuit power; do not connect external load; requires 1µF bypass capacitor to PGND.
7 BOOT power_out Bootstrap supply voltage for internal high-side gate driver; requires 100nF quality ceramic capacitor connected between this pin and SW node.
8 SW output Regulator switch node output connecting to power inductor; switches at 400kHz with voltage range 0V to VIN with maximum transient overshoot to 70.3V.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package ESOP-8
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: LMR36510FADDAR
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: lmr36510faddar-etched.step / lmr36510faddar-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr36510faddar.step / lmr36510faddar.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 365960058d0081b5, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF