component

CC2420RGZR

Public Made by Adom

by adom

Texas Instruments RF Transceiver ICs, VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentradio frequency chip-antennacc2420rgzrfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

CC2420RGZR

Texas Instruments · RF Transceiver ICs · VQFN-48-EP(7x7)

CC2420RGZR from Texas Instruments, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCO_GUARD power_in Guard ring connection for VCO to AVDD shielding.
2 AVDD_VCO power_in 1.8 V power supply for VCO.
3 AVDD_PRE power_in 1.8 V power supply for prescaler.
4 AVDD_RF1 power_in 1.8 V power supply for RF front-end.
5 GND power_in Analog ground pin for RF shielding.
6 RF_P bidirectional Positive RF input/output signal for LNA in receive mode and PA in transmit mode.
7 TXRX_SWITCH power_in RF front-end common supply connection requiring external DC connection to RF_P and RF_N.
8 RF_N bidirectional Negative RF input/output signal for LNA in receive mode and PA in transmit mode.
9 GND power_in Analog ground pin for RF shielding.
10 AVDD_SW power_in 1.8 V power supply for LNA and PA switch.
11 NC unconnected Not connected.
12 NC unconnected Not connected.
13 NC unconnected Not connected.
14 AVDD_RF2 power_in 1.8 V power supply for receive and transmit mixers.
15 AVDD_IF2 power_in 1.8 V power supply for transmit and receive IF chain.
16 NC unconnected Not connected.
17 AVDD_ADC power_in 1.8 V power supply for analog sections of ADCs and DACs.
18 DVDD_ADC power_in 1.8 V power supply for digital sections of receive ADCs.
19 DGND_GUARD power_in Digital ground connection for digital noise isolation.
20 DGUARD power_in 1.8 V power supply connection for digital noise isolation.
21 RESETn input Asynchronous active-low digital reset.
22 DGND power_in Digital ground connection for digital core and pads.
23 DSUB_PADS power_in Substrate ground connection for digital pads.
24 DSUB_CORE power_in Substrate ground connection for digital modules.
25 DVDD3.3 power_in 3.3 V power supply for digital I/Os with voltage range 1.6 to 3.6 V matching external interfacing circuit.
26 DVDD1.8 power_in 1.8 V power supply for digital core.
27 SFD output Start of Frame Delimiter digital output or digital mux output.
28 CCA output Clear Channel Assessment digital output or digital mux output.
29 FIFOP output Active high when RXFIFO bytes exceed threshold or serial RF clock in test mode.
30 FIFO bidirectional Active high when data in RXFIFO or serial RF data input/output in test mode.
31 CSn input SPI chip select active low.
32 SCLK input SPI serial clock input up to 10 MHz maximum frequency.
33 SI input SPI slave input sampled on positive edge of SCLK.
34 SO tri_state SPI slave output tristate updated on negative edge of SCLK.
35 DVDD_RAM power_in 1.8 V power supply for digital RAM.
36 NC unconnected Not connected.
37 AVDD_XOSC16 power_in 1.8 V power supply for 16 MHz crystal oscillator.
38 XOSC16_Q2 bidirectional 16 MHz crystal oscillator pin 2.
39 XOSC16_Q1 bidirectional 16 MHz crystal oscillator pin 1 or external clock input.
40 NC unconnected Not connected.
41 VREG_EN input Voltage regulator enable active high held at VREG_IN voltage level.
42 VREG_OUT power_out Voltage regulator 1.8 V power supply output.
43 VREG_IN power_in Voltage regulator power supply input with 2.1 to 3.6 V range.
44 AVDD_IF1 power_in 1.8 V power supply for transmit and receive IF chain.
45 R_BIAS output External precision resistor connection for 43 kΩ ±1% component.
46 ATEST2 bidirectional Analog test I/O for prototype and production testing.
47 ATEST1 bidirectional Analog test I/O for prototype and production testing.
48 AVDD_CHP power_in 1.8 V power supply for phase detector and charge pump.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-48-EP(7x7)
Category Radio Frequency Chip/Antenna
Pins 49

CAD (KiCad official)

  • Symbol: CC2420RGZR
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: cc2420rgzr-etched.step / cc2420rgzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); cc2420rgzr.step / cc2420rgzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (90 pp, sha256 7816553859cd665f, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF