component
TPS62152RGTR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, TQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS62152RGTR
Texas Instruments · DC-DC Converters · TQFN-16-EP(3x3)
TPS62152RGTR from Texas Instruments, in a TQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch node output, -0.3 to 17.3 V; connected to internal MOSFET high-side switch and inductor. |
| 2 | SW | output | Switch node output, -0.3 to 17.3 V; connected to internal MOSFET high-side switch and inductor. |
| 3 | SW | output | Switch node output, -0.3 to 17.3 V; connected to internal MOSFET high-side switch and inductor. |
| 4 | PG | tri_state | Power good open-drain output, -0.3 to 7 V, max sink 10 mA; high when VOUT ready (≥92% nominal), low when below nominal; requires external pullup resistor. |
| 5 | FB | input | Feedback input (fixed 3.3 V version), -0.3 to 7 V; internally pulled down for TPS62152; recommended to connect to AGND for thermal performance. |
| 6 | AGND | power_in | Analog ground reference, 0 V; must be directly connected to exposed thermal pad and common ground plane. |
| 7 | FSW | input | Frequency select input, -0.3 to 7 V; low selects ~2.5 MHz (typ), high selects ~1.25 MHz (typ); internal 400 kΩ pulldown resistor. |
| 8 | DEF | input | Output voltage scaling input, -0.3 to 7 V; low = nominal (3.3 V), high = nominal +5% (3.465 V); internal 400 kΩ pulldown resistor. |
| 9 | SS/TR | input | Soft-start/tracking input, -0.3 to 17.3 V; external capacitor sets output voltage ramp rate (2.5 µA source current typical); can track external voltage for power sequencing. |
| 10 | AVIN | power_in | Analog supply voltage input, -0.3 to 20 V; provides power for control circuitry; must connect to same source as PVIN. |
| 11 | PVIN | power_in | Power supply input, -0.3 to 20 V (recommended 3 to 17 V); supplies power stage and high-side MOSFET gate drive. |
| 12 | PVIN | power_in | Power supply input, -0.3 to 20 V (recommended 3 to 17 V); supplies power stage and high-side MOSFET gate drive. |
| 13 | EN | input | Enable input, -0.3 to 17.3 V; high enables device operation, low enters shutdown (~1.5 µA typ); internal 400 kΩ pulldown resistor. |
| 14 | VOS | input | Output voltage sense input, -0.3 to 7 V; connection point for control loop feedback and feedforward capacitor. |
| 15 | PGND | power_in | Power ground reference, 0 V; must be directly connected to exposed thermal pad and common ground plane. |
| 16 | PGND | power_in | Power ground reference, 0 V; must be directly connected to exposed thermal pad and common ground plane. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TQFN-16-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
TPS62152RGTR - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: TQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tps62152rgtr-etched.step/tps62152rgtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62152rgtr.step/tps62152rgtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
b146908d5c550566, retrieved 2026-09-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).