Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

F28P550SJ9PDTR

Texas Instruments · IC · TQFP-128(14x14)

F28P550SJ9PDTR from Texas Instruments, in a TQFP-128(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GPIO29 bidirectional General-purpose I/O 29 with muxed digital peripheral functions.
2 GPIO28 bidirectional General-purpose I/O 28 shared with analog inputs A16, B16, C16.
3 XRSn bidirectional Open-drain device reset input and watchdog reset output with internal pullup; use a 2.2 kΩ to 10 kΩ resistor to VDDIO and at most 100 nF to VSS.
4 GPIO46 bidirectional General-purpose I/O 46 with muxed digital peripheral functions.
5 VDDIO power_in 3.3-V digital I/O power pin; place a minimum 0.1-µF decoupling capacitor on each pin.
6 VDD power_in 1.2-V digital logic power pin; about 10 µF minimum total decoupling, connect all VDD pins together when internal VREG is used.
7 VSS power_in Digital ground; must be connected to board ground.
8 GPIO47 bidirectional General-purpose I/O 47 with muxed digital peripheral functions.
9 GPIO66 bidirectional General-purpose I/O 66 with muxed digital peripheral functions.
10 GPIO67 bidirectional General-purpose I/O 67 with muxed digital peripheral functions.
11 GPIO48 bidirectional General-purpose I/O 48 with muxed digital peripheral functions.
12 GPIO49 bidirectional General-purpose I/O 49 with muxed digital peripheral functions.
13 GPIO50 bidirectional General-purpose I/O 50 with muxed digital peripheral functions.
14 GPIO51 bidirectional General-purpose I/O 51 with muxed digital peripheral functions.
15 GPIO52 bidirectional General-purpose I/O 52 with muxed digital peripheral functions.
16 GPIO53 bidirectional General-purpose I/O 53 with muxed digital peripheral functions.
17 GPIO54 bidirectional General-purpose I/O 54 with muxed digital peripheral functions.
18 A6,D14,E14,GPIO228 bidirectional ADC-A6, ADC-D14, ADC-E14 analog inputs shared with GPIO228.
19 B2,C6,E12,GPIO226 bidirectional ADC-B2, ADC-C6, ADC-E12 analog inputs shared with GPIO226.
20 A3,B3,C5,GPIO242,PGA2_INP bidirectional ADC-A3, ADC-B3, ADC-C5 analog inputs and PGA-2 positive input shared with GPIO242.
21 A2,B6,C9,GPIO224,PGA1_INP bidirectional ADC-A2, ADC-B6, ADC-C9 analog inputs and PGA-1 positive input shared with GPIO224.
22 A15,B9,C7,PGA1_INM input ADC-A15, ADC-B9, ADC-C7 analog inputs and PGA-1 inverting input.
23 C25,D5,E5 input ADC-C25, ADC-D5, ADC-E5 analog inputs.
24 A26,D6,E6 input ADC-A26, ADC-D6, ADC-E6 analog inputs.
25 B26,D7,E7 input ADC-B26, ADC-D7, ADC-E7 analog inputs.
26 A14/B14/C4/PGA1_OUT input ADC-A14, ADC-B14, ADC-C4 analog inputs and PGA-1 output.
27 A11/B10/C0/PGA2_OUT input ADC-A11, ADC-B10, ADC-C0 analog inputs and PGA-2 output.
28 A5,B12,C2,PGA2_INM input ADC-A5, ADC-B12, ADC-C2 analog inputs and PGA-2 inverting input.
29 A1,B7,CMP1_DACL,D11 input ADC-A1, ADC-B7, ADC-D11 analog inputs and CMPSS-1 low DAC output.
30 A0/B15/C15/DACA_OUT bidirectional ADC-A0, ADC-B15, ADC-C15 analog inputs and buffered DAC-A output.
31 VREFHI input ADC high reference; tie to VDDA if the ADC is unused.
32 VREFHI input ADC high reference (second pin); tie to VDDA if the ADC is unused.
33 VREFLO input ADC low reference (also ADC-A13, B13, C13, D13, E13); tie to VSSA if unused.
34 VREFLO input ADC low reference (second pin, also ADC-A13, B13, C13, D13, E13); tie to VSSA if unused.
35 A12,C1,E11,PGA3_INP input ADC-A12, ADC-C1, ADC-E11 analog inputs and PGA-3 positive input.
36 B11,D16,E16,PGA3_INM input ADC-B11, ADC-D16, ADC-E16 analog inputs and PGA-3 inverting input.
37 A7/B30/C3/D12/E30 input ADC-A7, ADC-B30, ADC-C3, ADC-D12, ADC-E30 analog inputs.
38 B5,D15,E15,PGA3_OUT input ADC-B5, ADC-D15, ADC-E15 analog inputs and PGA-3 output.
39 A8/B0/C11 input ADC-A8, ADC-B0, ADC-C11 analog inputs.
40 VSSA power_in Analog ground; tie to VSS if no separate analog ground is used.
41 VDDA power_in 3.3-V analog power pin; place a minimum 2.2-µF decoupling capacitor.
42 A4,B8,C14 input ADC-A4, ADC-B8, ADC-C14 analog inputs.
43 C26,D8,E8,GPIO211 input ADC-C26, ADC-D8, ADC-E8 analog inputs shared with GPIO211.
44 A27,D9,E9,GPIO212 input ADC-A27, ADC-D9, ADC-E9 analog inputs shared with GPIO212.
45 B27,D10,E10,GPIO213 input ADC-B27, ADC-D10, ADC-E10 analog inputs shared with GPIO213.
46 C27,D18,E18,GPIO214 input ADC-C27, ADC-D18, ADC-E18 analog inputs shared with GPIO214.
47 A28,D19,E19,GPIO215 input ADC-A28, ADC-D19, ADC-E19 analog inputs shared with GPIO215.
48 A9,GPIO227 bidirectional ADC-A9 analog input shared with GPIO227.
49 B4,C8,GPIO236 bidirectional ADC-B4, ADC-C8 analog inputs shared with GPIO236.
50 A10,B1,C10,GPIO230 bidirectional ADC-A10, ADC-B1, ADC-C10 analog inputs shared with GPIO230.
51 GPIO55 bidirectional General-purpose I/O 55 with muxed digital peripheral functions.
52 GPIO60 bidirectional General-purpose I/O 60 with muxed digital peripheral functions.
53 VSS power_in Digital ground; must be connected to board ground.
54 VDD power_in 1.2-V digital logic power pin; about 10 µF minimum total decoupling, connect all VDD pins together when internal VREG is used.
55 VDDIO power_in 3.3-V digital I/O power pin; place a minimum 0.1-µF decoupling capacitor on each pin.
56 GPIO64 bidirectional General-purpose I/O 64 with muxed digital peripheral functions.
57 GPIO65 bidirectional General-purpose I/O 65 with muxed digital peripheral functions.
58 GPIO62 bidirectional General-purpose I/O 62 with muxed digital peripheral functions.
59 GPIO63 bidirectional General-purpose I/O 63 with muxed digital peripheral functions.
60 A17,B17,C17,GPIO20 bidirectional ADC-A17, ADC-B17, ADC-C17 analog inputs shared with GPIO20.
61 A18,B18,C18,GPIO21 bidirectional ADC-A18, ADC-B18, ADC-C18 analog inputs shared with GPIO21.
62 A19,B19,C19,GPIO13 bidirectional ADC-A19, ADC-B19, ADC-C19 analog inputs shared with GPIO13.
63 A20,B20,C20,GPIO12 bidirectional ADC-A20, ADC-B20, ADC-C20 analog inputs shared with GPIO12.
64 A24,D0,E0,GPIO11 bidirectional ADC-A24, ADC-D0, ADC-E0 analog inputs shared with GPIO11.
65 B24,D1,E1,GPIO33 bidirectional ADC-B24, ADC-D1, ADC-E1 analog inputs shared with GPIO33.
66 C24,D2,E2,GPIO16 bidirectional ADC-C24, ADC-D2, ADC-E2 analog inputs shared with GPIO16.
67 A25,D3,E3,GPIO17 bidirectional ADC-A25, ADC-D3, ADC-E3 analog inputs shared with GPIO17.
68 B25,D4,E4,GPIO24 bidirectional ADC-B25, ADC-D4, ADC-E4 analog inputs shared with GPIO24.
69 GPIO25 bidirectional General-purpose I/O 25 with muxed digital peripheral functions.
70 GPIO26 bidirectional General-purpose I/O 26 with muxed digital peripheral functions.
71 GPIO27 bidirectional General-purpose I/O 27 with muxed digital peripheral functions.
72 GPIO68 bidirectional General-purpose I/O 68 with muxed digital peripheral functions.
73 GPIO69 bidirectional General-purpose I/O 69 with muxed digital peripheral functions.
74 GPIO70 bidirectional General-purpose I/O 70 with muxed digital peripheral functions.
75 TCK input JTAG test clock with internal pullup.
76 GPIO37/TDO bidirectional JTAG test data output (default mux), tri-stated without JTAG activity so enable internal pullup or add an external pullup.
77 TMS bidirectional JTAG test-mode select with internal pullup; add an external pullup (recommended 2.2 kΩ) to VDDIO.
78 GPIO35/TDI bidirectional JTAG test data input (default mux); enable internal pullup or add an external pullup to avoid a floating input.
79 GPIO32 bidirectional General-purpose I/O 32, a 5-V fail-safe tolerant pin.
80 GPIO56 bidirectional General-purpose I/O 56 with muxed digital peripheral functions.
81 GPIO57 bidirectional General-purpose I/O 57 with muxed digital peripheral functions.
82 GPIO58 bidirectional General-purpose I/O 58 with muxed digital peripheral functions.
83 GPIO71 bidirectional General-purpose I/O 71 with muxed digital peripheral functions.
84 GPIO72 bidirectional General-purpose I/O 72 with muxed digital peripheral functions.
85 GPIO73 bidirectional General-purpose I/O 73 with muxed digital peripheral functions.
86 GPIO74 bidirectional General-purpose I/O 74 with muxed digital peripheral functions.
87 GPIO18/X2 bidirectional General-purpose I/O 18 or crystal oscillator output X2.
88 GPIO19/X1 bidirectional General-purpose I/O 19 or crystal oscillator input X1 / single-ended 3.3-V clock input.
89 VDDIO power_in 3.3-V digital I/O power pin; place a minimum 0.1-µF decoupling capacitor on each pin.
90 VDD power_in 1.2-V digital logic power pin; about 10 µF minimum total decoupling, connect all VDD pins together when internal VREG is used.
91 GPIO43 bidirectional General-purpose I/O 43 with muxed digital peripheral functions.
92 VSS power_in Digital ground; must be connected to board ground.
93 VREGENZ input Internal voltage regulator enable with internal pulldown; tie low to VSS to enable internal VREG, high to VDDIO for external supply.
94 GPIO42 bidirectional General-purpose I/O 42, located near the power management module so avoid negative noise below VSS - 0.3 V.
95 GPIO8 bidirectional General-purpose I/O 8, located near the power management module so avoid negative noise below VSS - 0.3 V.
96 GPIO4 bidirectional General-purpose I/O 4 with muxed digital peripheral functions.
97 GPIO3 bidirectional General-purpose I/O 3, a 5-V fail-safe tolerant pin.
98 GPIO2 bidirectional General-purpose I/O 2, a 5-V fail-safe tolerant pin.
99 GPIO1 bidirectional General-purpose I/O 1 with muxed digital peripheral functions.
100 GPIO0 bidirectional General-purpose I/O 0 with muxed digital peripheral functions.
101 GPIO40 bidirectional General-purpose I/O 40 with muxed digital peripheral functions.
102 GPIO23 bidirectional General-purpose I/O 23, also USB-0 PHY differential data (USB0DM).
103 GPIO41 bidirectional General-purpose I/O 41, also USB-0 PHY differential data (USB0DP).
104 GPIO22 bidirectional General-purpose I/O 22 with muxed digital peripheral functions.
105 GPIO7 bidirectional General-purpose I/O 7 with muxed digital peripheral functions.
106 GPIO44 bidirectional General-purpose I/O 44 with muxed digital peripheral functions.
107 VSS power_in Digital ground; must be connected to board ground.
108 VDD power_in 1.2-V digital logic power pin; about 10 µF minimum total decoupling, connect all VDD pins together when internal VREG is used.
109 VDDIO power_in 3.3-V digital I/O power pin; place a minimum 0.1-µF decoupling capacitor on each pin.
110 GPIO45 bidirectional General-purpose I/O 45 with muxed digital peripheral functions.
111 GPIO75 bidirectional General-purpose I/O 75 with muxed digital peripheral functions.
112 GPIO76 bidirectional General-purpose I/O 76 with muxed digital peripheral functions.
113 GPIO77 bidirectional General-purpose I/O 77 with muxed digital peripheral functions.
114 GPIO78 bidirectional General-purpose I/O 78 with muxed digital peripheral functions.
115 GPIO79 bidirectional General-purpose I/O 79 with muxed digital peripheral functions.
116 GPIO80 bidirectional General-purpose I/O 80 with muxed digital peripheral functions.
117 GPIO81 bidirectional General-purpose I/O 81 with muxed digital peripheral functions.
118 GPIO5 bidirectional General-purpose I/O 5 with muxed digital peripheral functions.
119 GPIO9 bidirectional General-purpose I/O 9, a 5-V fail-safe tolerant pin.
120 GPIO61 bidirectional General-purpose I/O 61 with muxed digital peripheral functions.
121 GPIO59 bidirectional General-purpose I/O 59 with muxed digital peripheral functions.
122 GPIO10 bidirectional General-purpose I/O 10 with muxed digital peripheral functions.
123 GPIO34 bidirectional General-purpose I/O 34 with muxed digital peripheral functions.
124 GPIO15 bidirectional General-purpose I/O 15 with muxed digital peripheral functions.
125 GPIO14 bidirectional General-purpose I/O 14 with muxed digital peripheral functions.
126 GPIO6 bidirectional General-purpose I/O 6 with muxed digital peripheral functions.
127 GPIO30 bidirectional General-purpose I/O 30 with muxed digital peripheral functions.
128 GPIO31 bidirectional General-purpose I/O 31 with muxed digital peripheral functions.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TQFP-128(14x14)
Category
Pins 128

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD supply voltage with respect to VSS VDD -0.3 1.5 V 68
VDDIO supply voltage with respect to VSS VDDIO -0.3 4.6 V 68
VDDA supply voltage with respect to VSSA VDDA -0.3 4.6 V 68
Input voltage (3.3 V) VIN -0.3 4.6 V 68
Input voltage (5.0 V) VIN -0.3 6 V GPIO2, GPIO3, GPIO9, GPIO32 only 68
Output voltage VO -0.3 4.6 V 68
Input clamp current per pin IIK -20 20 mA VIN < VSS/VSSA, VIN > VDDIO/VDDA 68
Input clamp current total for all inputs IIKTOTAL -20 20 mA VIN < VSS/VSSA, VIN > VDDIO/VDDA 68
Digital output current per pin IOUT -20 20 mA 68
Operating junction temperature TJ -40 155 °C 68
Storage temperature Tstg -65 150 °C 68
Device supply voltage VDDIO and VDDA, internal BOR disabled VDDIO, VDDA 2.8 3.3 3.63 V Internal BOR disabled 71
Device supply voltage VDDIO and VDDA, internal BOR enabled VDDIO, VDDA 3.3 3.63 V Internal BOR enabled; min is VBOR-VDDIO(MAX) + VBOR-GB 71
Device supply voltage VDD VDD 1.14 1.2 1.32 V 71
Digital input voltage VIN -0.3 V VSS, 0.3 to VDDIO + 0.3 71
Digital input voltage GPIO2, 3, 9, 32 VIN -0.3 5.5 V VSS, 0.3 to 5.5 71
Junction temperature TJ -40 150 °C 71
Free-air temperature TA -40 125 °C 71
Junction-to-case thermal resistance RΘJC 10.6 °C/W PDT package 82
Junction-to-board thermal resistance RΘJB 24.9 °C/W PDT package 82
Junction-to-free air thermal resistance RΘJA 42.5 °C/W PDT package, High k PCB 82
Junction-to-package top PsiJT 0.4 °C/W PDT package 82
Junction-to-board PsiJB 24.4 °C/W PDT package 82
High-level output impedance ROH 50 66 96 Ω VOH=VDDS-0.4V 79
Low-level output impedance ROL 48 60 84 Ω VOL=0.4V 79
Low-level output impedance GPIO2/3/9/32, DRVSELGPIOx = 1 ROL 15 21 33 Ω IO_DRVSEL:DRVSELGPIOx = 1 79
Weak pulldown resistance RPULLDOWN 22 31 62 kΩ 79
Weak pullup resistance RPULLUP 19 29 54 kΩ 79
Weak pullup resistance GPIO2/3/9/32 RPULLUP 20 31 65 kΩ GPIO2/3/9/32 79
High-level input voltage VIH 2 V 79
High-level input voltage GPIO 23/41 VIH 2.21 V 79
High-level input voltage GPIO2/3/9/32 VIH 1.35 V IO_MODSEL:MODSELGPIOx = 1 79
Low-level input voltage VIL 0.8 V 79
Low-level output voltage VOL 0.4 V IOL = IOL MAX 79
Low-level output voltage VOL 0.2 V IOL = 100 µA 79
Pin leakage digital inputs ILEAK 0.15 µA Pullups and outputs disabled, 0 V ≤ VIN ≤ VDDIO 80
Internal voltage regulator output VVREG 1.152 1.2 1.248 V 92
VDDIO BOR voltage on ramp down after XRSn release VBOR-VDDIO-DOWN 2.81 3 V After XRSn Release 92
VDDIO Power on Reset Voltage VPOR-VDDIO 2.3 V Before and After XRSn Release 92
Supply ramp rate of 3.3V rails SRVDD33 20 100 mV/us 92
Frequency, device (system) clock f(SYSCLK) 2 150 MHz 100
Frequency, INTOSC1 and INTOSC2 fINTOSC 9.82 10 10.1 MHz -40°C to 125°C 108
VDDIO current, operating IDDIO 92 mA VREG enabled, operating mode, 30 ℃ 72
VDDIO current, operating IDDIO 115 mA VREG enabled, operating mode, 125 ℃ 72
VDDA current, operating IDDA 14 mA VREG enabled, operating mode, 125 ℃ 72
VDDIO current during flash erase/program IDDIO 91 128 mA VREG enabled, Flash erase/program 73

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PCT ADC_RESULT_REGS ADCERESULT_BASE 0x0000_1A00 YES YES YES - PCTRACE_BUFFER_REGS ERAD_PCTRACE_BUFFER_BASE 0x0005_FE00 YES - - YES 218

CAD (KiCad official)

  • Symbol: F28P550SJ9PDTR
  • Footprint: Package_QFP:TQFP-128_14x14mm_P0.4mm
  • 3D model: TQFP-128(14x14) (KiCad packages3D, STEP)
  • 3D model files: f28p550sj9pdtr-etched.step / f28p550sj9pdtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); f28p550sj9pdtr.step / f28p550sj9pdtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (296 pp, sha256 573b9b30c44461b6, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF