Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ZXLD1322DCCTC

Diodes Incorporated · LED Drivers · DFN-14-EP(3x4)

ZXLD1322DCCTC from Diodes Incorporated, in a DFN-14-EP(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADJ input Adjust input: leave floating for 100% current, drive with a DC voltage between 50mV and VREF for 10% to 100% dimming, or drive with a 200Hz PWM signal; a level below 28mV turns the device off.
2 BIAS input Bias pin that sets the switch base drive: short to ground for maximum base drive current (50mA nominal) or connect RBIAS to ground to reduce it (RBIAS = 1680 ohms gives 10mA nominal).
3 CFB bidirectional Control input/output for the feedback loop; connect a 10nF capacitor from this pin to ground for loop compensation.
4 N/C unconnected Not connected internally (open circuit).
5 ISENSE input Switch peak current sense pin; a resistor RSENSE from this pin to ground sets peak switch current as 50mV/RSENSE, and the sense voltage is nominally 50mV with a range of 45mV to 65mV.
6 EMITTER1 passive Switch emitter; connect both emitter pins to the top of RSENSE to sense emitter current.
7 EMITTER2 passive Switch emitter; connect both emitter pins to the top of RSENSE to sense emitter current.
8 COLLECTOR2 passive Switch collector; connect both collector pins to the lower side of the coil.
9 COLLECTOR1 passive Switch collector; connect both collector pins to the lower side of the coil.
10 N/C unconnected Internally connected; do not connect to external circuitry.
11 M_VIN power_in Input supply to the high-side current monitor; connect to the output voltage (whichever is higher) and to resistor RM, which sets the nominal LED current as 0.1/RM.
12 VIN power_in Input supply voltage (2.5V to 15V) and load-side input of the high-side current monitor; connect to sensing resistor RM.
13 TADJ input Temperature adjust input for LED thermal compensation; connect a thermistor/resistor network to reduce output current above a preset threshold, or connect to VREF to disable the function.
14 VREF power_out Internal 0.5V reference voltage output (480mV to 520mV).
15 Exposed Pad power_in Exposed pad; connect to ground (0V) with an appropriately sized land and good ground connections.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package DFN-14-EP(3x4)
Category Display Modules / LED Drivers / Display Drivers
Pins 15

CAD (KiCad official)

  • Symbol: ZXLD1322DCCTC
  • Footprint: Package_DFN_QFN:DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm
  • 3D model: DFN-14-EP(3x4) (KiCad packages3D, STEP)
  • 3D model files: zxld1322dcctc-etched.step / zxld1322dcctc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); zxld1322dcctc.step / zxld1322dcctc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (17 pp, sha256 dee5873c30466422, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF