Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
ZXLD1322DCCTC
Diodes Incorporated · LED Drivers · DFN-14-EP(3x4)
ZXLD1322DCCTC from Diodes Incorporated, in a DFN-14-EP(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | Adjust input: leave floating for 100% current, drive with a DC voltage between 50mV and VREF for 10% to 100% dimming, or drive with a 200Hz PWM signal; a level below 28mV turns the device off. |
| 2 | BIAS | input | Bias pin that sets the switch base drive: short to ground for maximum base drive current (50mA nominal) or connect RBIAS to ground to reduce it (RBIAS = 1680 ohms gives 10mA nominal). |
| 3 | CFB | bidirectional | Control input/output for the feedback loop; connect a 10nF capacitor from this pin to ground for loop compensation. |
| 4 | N/C | unconnected | Not connected internally (open circuit). |
| 5 | ISENSE | input | Switch peak current sense pin; a resistor RSENSE from this pin to ground sets peak switch current as 50mV/RSENSE, and the sense voltage is nominally 50mV with a range of 45mV to 65mV. |
| 6 | EMITTER1 | passive | Switch emitter; connect both emitter pins to the top of RSENSE to sense emitter current. |
| 7 | EMITTER2 | passive | Switch emitter; connect both emitter pins to the top of RSENSE to sense emitter current. |
| 8 | COLLECTOR2 | passive | Switch collector; connect both collector pins to the lower side of the coil. |
| 9 | COLLECTOR1 | passive | Switch collector; connect both collector pins to the lower side of the coil. |
| 10 | N/C | unconnected | Internally connected; do not connect to external circuitry. |
| 11 | M_VIN | power_in | Input supply to the high-side current monitor; connect to the output voltage (whichever is higher) and to resistor RM, which sets the nominal LED current as 0.1/RM. |
| 12 | VIN | power_in | Input supply voltage (2.5V to 15V) and load-side input of the high-side current monitor; connect to sensing resistor RM. |
| 13 | TADJ | input | Temperature adjust input for LED thermal compensation; connect a thermistor/resistor network to reduce output current above a preset threshold, or connect to VREF to disable the function. |
| 14 | VREF | power_out | Internal 0.5V reference voltage output (480mV to 520mV). |
| 15 | Exposed Pad | power_in | Exposed pad; connect to ground (0V) with an appropriately sized land and good ground connections. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | DFN-14-EP(3x4) |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
ZXLD1322DCCTC - Footprint:
Package_DFN_QFN:DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm - 3D model: DFN-14-EP(3x4) (KiCad packages3D, STEP)
- 3D model files:
zxld1322dcctc-etched.step/zxld1322dcctc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zxld1322dcctc.step/zxld1322dcctc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (17 pp, sha256
dee5873c30466422, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).