main
Ray Set visibility: public c09fac6
{
  "schema_version": 1,
  "type": "component",
  "slug": "zxld1322dcctc",
  "title": "ZXLD1322DCCTC",
  "brief": "Diodes Incorporated LED Drivers, DFN-14-EP(3x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "display modules - led drivers - display drivers",
    "zxld1322dcctc",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "ZXLD1322DCCTC",
    "manufacturer": "Diodes Incorporated",
    "package": "DFN-14-EP(3x4)",
    "pin_count": 15,
    "category": "Display Modules / LED Drivers / Display Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.diodes.com/assets/Datasheets/ZXLD1322DCCTC.pdf",
    "parts": {
      "symbol": "zxld1322dcctc.kicad_sym",
      "footprint": "zxld1322dcctc.kicad_mod",
      "model_3d": "zxld1322dcctc-hero.glb",
      "model_3d_plain": "zxld1322dcctc-etched.glb",
      "model_3d_step": "zxld1322dcctc-etched.step",
      "model_3d_step_plain": "zxld1322dcctc.step",
      "lbr": "zxld1322dcctc.lbr"
    },
    "distributor_links": {
      "lcsc": "C2679107",
      "digikey": "ZXLD1322DCCTR-ND",
      "mouser": "522-ZXLD1322DCCTC"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T16:47:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ZXLD1322DCCTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "522-ZXLD1322DCCTC",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ADJ",
        "type": "input",
        "description": "Adjust input: leave floating for 100% current, drive with a DC voltage between 50mV and VREF for 10% to 100% dimming, or drive with a 200Hz PWM signal; a level below 28mV turns the device off."
      },
      {
        "number": "2",
        "name": "BIAS",
        "type": "input",
        "description": "Bias pin that sets the switch base drive: short to ground for maximum base drive current (50mA nominal) or connect RBIAS to ground to reduce it (RBIAS = 1680 ohms gives 10mA nominal)."
      },
      {
        "number": "3",
        "name": "CFB",
        "type": "bidirectional",
        "description": "Control input/output for the feedback loop; connect a 10nF capacitor from this pin to ground for loop compensation."
      },
      {
        "number": "4",
        "name": "N/C",
        "type": "unconnected",
        "description": "Not connected internally (open circuit)."
      },
      {
        "number": "5",
        "name": "ISENSE",
        "type": "input",
        "description": "Switch peak current sense pin; a resistor RSENSE from this pin to ground sets peak switch current as 50mV/RSENSE, and the sense voltage is nominally 50mV with a range of 45mV to 65mV."
      },
      {
        "number": "6",
        "name": "EMITTER1",
        "type": "passive",
        "description": "Switch emitter; connect both emitter pins to the top of RSENSE to sense emitter current."
      },
      {
        "number": "7",
        "name": "EMITTER2",
        "type": "passive",
        "description": "Switch emitter; connect both emitter pins to the top of RSENSE to sense emitter current."
      },
      {
        "number": "8",
        "name": "COLLECTOR2",
        "type": "passive",
        "description": "Switch collector; connect both collector pins to the lower side of the coil."
      },
      {
        "number": "9",
        "name": "COLLECTOR1",
        "type": "passive",
        "description": "Switch collector; connect both collector pins to the lower side of the coil."
      },
      {
        "number": "10",
        "name": "N/C",
        "type": "unconnected",
        "description": "Internally connected; do not connect to external circuitry."
      },
      {
        "number": "11",
        "name": "M_VIN",
        "type": "power_in",
        "description": "Input supply to the high-side current monitor; connect to the output voltage (whichever is higher) and to resistor RM, which sets the nominal LED current as 0.1/RM."
      },
      {
        "number": "12",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply voltage (2.5V to 15V) and load-side input of the high-side current monitor; connect to sensing resistor RM."
      },
      {
        "number": "13",
        "name": "TADJ",
        "type": "input",
        "description": "Temperature adjust input for LED thermal compensation; connect a thermistor/resistor network to reduce output current above a preset threshold, or connect to VREF to disable the function."
      },
      {
        "number": "14",
        "name": "VREF",
        "type": "power_out",
        "description": "Internal 0.5V reference voltage output (480mV to 520mV)."
      },
      {
        "number": "15",
        "name": "Exposed Pad",
        "type": "power_in",
        "description": "Exposed pad; connect to ground (0V) with an appropriately sized land and good ground connections."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 10 is labelled N/C in the table but its description says it is internally connected, so it is ty"
        ],
        "pages_sent": 17,
        "cost_usd": 0.0273,
        "at": "2026-10-28T16:47:19"
      },
      "datasheet": {
        "url": "https://www.diodes.com/assets/Datasheets/ZXLD1322DCCTC.pdf",
        "pages": 17,
        "sha256": "dee5873c30466422",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 15,
        "described": 15,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "zxld1322dcctc.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          3.98,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "be5cff1a18ac6ffbe197561441c1546755e61de7ca02dcc6734fc20d3d6c79dd",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "zxld1322dcctc-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          3.98,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "43848f1195282b92b563dc2d86a9834eb64341bbcbb4dc9c275fbaffd4d9d8e3",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Diodes Incorporated",
      "Package": "DFN-14-EP(3x4)",
      "Category": "Display Modules / LED Drivers / Display Drivers",
      "Pins": "15"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "zxld1322dcctc"
  ],
  "discovery_pitch": "ZXLD1322DCCTC (Diodes Incorporated) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "zxld1322dcctc.kicad_sym",
    "zxld1322dcctc.kicad_mod",
    "zxld1322dcctc.glb",
    "zxld1322dcctc.step",
    "zxld1322dcctc.lbr",
    "docs/hero.png",
    "docs/zxld1322dcctc-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "zxld1322dcctc-hero.glb",
    "zxld1322dcctc-hero.overlay.json",
    "zxld1322dcctc-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}