3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMC9RS08KA1CSCR
NXP Semicon · NXP MCU · SOIC-8
MC9RS08KA1CSCR from NXP Semicon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTA2/KBIP2/TCLK/RESET/VPP | input | After power-on reset this pin is a general-purpose input (PTA2); setting RSTPE in SOPT makes it the RESET input with an automatically enabled internal pullup, and it needs an external VPP of typically 12 V for Flash programming or erasing, but it has no clamp diode to VDD and must not be driven above VDD when Flash programming or erasing is not taking place. |
| 2 | PTA3/ACMPO/BKGD/MS | bidirectional | This pin is the mode-select pin during reset and then the BKGD background debug serial pin with an internal pullup enabled; when BKGDPE in SOPT is cleared it works as an output-only PTA3 or analog comparator output (ACMPO) pin, and BKGD is a pseudo-open-drain pin that should have no significant capacitance attached. |
| 3 | VDD | power_in | This is the primary power supply pin that supplies all I/O buffer circuitry and the internal voltage regulator, and should be bypassed with a bulk capacitor (for example 10 µF) and a 0.1 µF ceramic capacitor located as close to the pins as practical. |
| 4 | VSS | power_in | This is the ground (primary return) pin for the MCU. |
| 5 | PTA5/KBIP5 | bidirectional | This is a general-purpose I/O pin with keyboard interrupt capability (wakeup from stop/wait only); after reset it is a high-impedance input with pullup/pulldown disabled, and an enabled pull device is recommended to prevent extra leakage from the floating input. |
| 6 | PTA0/KBIP0/ACMP+ | bidirectional | This is a general-purpose I/O pin that can also act as a keyboard interrupt (stop/wait wakeup only) and as the positive analog comparator input (ACMP+), with analog function taking priority over digital when both are enabled. |
| 7 | PTA1/KBIP1/ACMP- | bidirectional | This is a general-purpose I/O pin that can also act as a keyboard interrupt (stop/wait wakeup only) and as the negative analog comparator input (ACMP-), with analog function taking priority over digital when both are enabled. |
| 8 | PTA4/KBIP4 | bidirectional | This is a general-purpose I/O pin with keyboard interrupt capability (wakeup from stop/wait only); after reset it is a high-impedance input with pullup/pulldown disabled, and an enabled pull device is recommended to prevent extra leakage from the floating input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 5.8 | V | 111 | ||
| Maximum current into VDD | IDD | 120 | mA | 111 | |||
| Digital input voltage | VIn | -0.3 | V | max printed as VDD + 0.3 V | 111 | ||
| Instantaneous maximum current, single pin limit (applies to all port pins) | ID | -25 | 25 | mA | 111 | ||
| Storage temperature range | Tstg | -55 | 150 | °C | 111 | ||
| Operating temperature range (packaged) | TA | -40 | 85 | °C | 112 | ||
| Maximum junction temperature | TJMAX | 105 | °C | 112 | |||
| Thermal resistance, junction-to-ambient, 8-pin SOIC | θJA | 160 | °C/W | 8-pin SOIC, 1s single-layer board, junction to ambient natural convection | 112 | ||
| Thermal resistance, junction-to-ambient, 8-pin SOIC | θJA | 98 | °C/W | 8-pin SOIC, 2s2p four-layer board, junction to ambient natural convection | 112 | ||
| Supply voltage (run, wait and stop modes) | VDD | 1.8 | 5.5 | V | 0 < fBus < 10 MHz | 113 | |
| Minimum RAM retention supply voltage applied to VDD | VRAM | 0.8 | 1 | V | 113 | ||
| Low-voltage detection threshold (VDD falling) | VLVD | 1.8 | 1.86 | 1.95 | V | VDD falling | 113 |
| Low-voltage detection threshold (VDD rising) | VLVD | 1.88 | 1.94 | 2.03 | V | VDD rising | 113 |
| Power on reset (POR) voltage | VPOR | 0.9 | 1.4 | 1.7 | V | 113 | |
| Input leakage current (per pin) | /IIn/ | 0.025 | 1 | μA | VIn = VDD or VSS, all input only pins | 114 | |
| High impedance (off-state) leakage current (per pin) | /IOZ/ | 0.025 | 1 | μA | VIn = VDD or VSS, all input/output | 114 | |
| Internal pullup/pulldown resistors (all port pins) | RPU | 20 | 45 | 65 | kΩ | VIn = VSS for pullup, VIn = VDD for pulldown | 114 |
| Maximum total IOH for all port pins | /IOHT/ | 40 | mA | 114 | |||
| Output low voltage (port A) | VOL | 0.8 | V | IOL = 5 mA (VDD ≥ 4.5 V) | 114 | ||
| Maximum total IOL for all port pins | IOLT | 40 | mA | 114 | |||
| DC injection current, single pin limit | /IIC/ | 0.2 | mA | VIn < VSS, VIn > VDD; single pin limit | 114 | ||
| DC injection current, total MCU limit | /IIC/ | 0.8 | mA | VIn < VSS, VIn > VDD; total MCU limit, includes sum of all stressed pins | 114 | ||
| Input capacitance (all non-supply pins) | CIn | 7 | pF | 114 | |||
| Run supply current (fBus = 10 MHz) | RIDD10 | 5.6 | 6.5 | mA | VDD = 5 V; typ at 25 °C, max at 85 °C; fBus = 10 MHz; no dc loads on port pins | 117 | |
| Run supply current (fBus = 10 MHz) | RIDD10 | 4.7 | 5.5 | mA | VDD = 3 V; typ at 25 °C, max at 85 °C; fBus = 10 MHz; no dc loads on port pins | 117 | |
| Run supply current (fBus = 10 MHz) | RIDD10 | 2.3 | 3 | mA | VDD = 1.8 V; typ at 25 °C, max at 85 °C; fBus = 10 MHz; no dc loads on port pins | 117 | |
| Supply voltage | VDD | 1.8 | 5.5 | V | Analog comparator (ACMP) | 119 | |
| Analog source impedance | RAS | 10 | kΩ | 119 | |||
| Analog input offset voltage | VAIO | 20 | 40 | mV | 119 | ||
| Analog Comparator hysteresis | VH | 3 | 9 | 15 | mV | 119 | |
| Analog Comparator bandgap reference voltage | VBG | 1.155 | 1.19 | 1.23 | V | 119 | |
| Supply current (active) | IDDAC | 20 | 35 | μA | 119 | ||
| Average internal reference frequency - untrimmed | fint_ut | 25 | 31.25 | 41.66 | kHz | 119 | |
| Average internal reference frequency - trimmed | fint_t | 31.25 | 31.25 | 39.0625 | kHz | 119 | |
| DCO output frequency range - untrimmed | fdco_ut | 12.8 | 16 | 21.33 | MHz | 119 | |
| DCO output frequency range - trimmed | fdco_t | 16 | 16 | 20 | MHz | 119 | |
| Resolution of trimmed DCO output frequency | Δfdco_res_t | -0.2 | 0.2 | %fdco | at fixed voltage and temperature | 119 | |
| Total deviation of trimmed DCO output frequency | Δfdco_t | -2 | 2 | %fdco | over voltage and temperature | 119 | |
| FLL acquisition time | tacquire | 1 | ms | 119 | |||
| Bus frequency | fBus | 10 | MHz | tcyc = 1/fBus | 120 | ||
| Real time interrupt internal oscillator period | tRTI | 700 | 1000 | 1300 | μs | 120 | |
| External RESET pulse width | textrst | 150 | ns | shortest pulse guaranteed through pin input filter | 120 | ||
| KBI pulse width in stop | tKBIPWS | 100 | ns | 120 | |||
| Port rise and fall time | tRise, tFall | 11 | ns | load = 50 pF; slew rate control disabled (PTxSE = 0) | 120 | ||
| Port rise and fall time | tRise, tFall | 35 | ns | load = 50 pF; slew rate control enabled (PTxSE = 1) | 120 | ||
| Supply voltage for program/erase | VDD | 2.7 | 5.5 | V | program/erase | 122 | |
| Program/Erase voltage | VPP | 11.8 | 12 | 12.2 | V | 122 | |
| VPP current, program | IVPP_prog | 200 | μA | program | 122 | ||
| VPP current, mass erase | IVPP_erase | 100 | μA | mass erase | 122 | ||
| Supply voltage for read operation | VRead | 1.8 | 5.5 | V | 0 < fBus < 10 MHz | 122 | |
| Byte program time | tprog | 20 | 40 | μs | 122 | ||
| Mass erase time | tme | 500 | ms | 122 | |||
| Cumulative program HV time | thv | 8 | ms | same address cannot be programmed more than twice before next erase | 122 | ||
| Total cumulative HV time (total of tme & thv applied to device) | thv_total | 2 | hours | 122 | |||
| HVEN to program setup time | tpgs | 10 | μs | 122 | |||
| PGM/MASS to HVEN setup time | tnvs | 5 | μs | 122 | |||
| Recovery time | trcv | 1 | μs | 122 | |||
| Data retention | tD_ret | 15 | 100 | years | 122 |
CAD (KiCad official)
- Symbol:
MC9RS08KA1CSCR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mc9rs08ka1cscr-etched.step/mc9rs08ka1cscr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc9rs08ka1cscr.step/mc9rs08ka1cscr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (138 pp, sha256
b5790e9bafe95443, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).