main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mc9rs08ka1cscr: symbol repaired (body fitted to the names) · Ray
mc9rs08ka1cscr-etched.glb Publish 0.1.0 · Ray
mc9rs08ka1cscr-etched.step mc9rs08ka1cscr: factory component page (tier=lcsc) · Ray
mc9rs08ka1cscr-hero.glb mc9rs08ka1cscr: hero GLB from the etched model (keeps the MPN mark) · Ray
mc9rs08ka1cscr-hero.overlay.json Publish 0.1.0 · Ray
mc9rs08ka1cscr.glb Publish 0.1.0 · Ray
mc9rs08ka1cscr.kicad_mod Publish 0.1.0 · Ray
mc9rs08ka1cscr.kicad_sym mc9rs08ka1cscr: symbol repaired (body fitted to the names) · Ray
mc9rs08ka1cscr.lbr mc9rs08ka1cscr: symbol repaired (body fitted to the names) · Ray
mc9rs08ka1cscr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

MC9RS08KA1CSCR

NXP Semicon · NXP MCU · SOIC-8

MC9RS08KA1CSCR from NXP Semicon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTA2/KBIP2/TCLK/RESET/VPP input After power-on reset this pin is a general-purpose input (PTA2); setting RSTPE in SOPT makes it the RESET input with an automatically enabled internal pullup, and it needs an external VPP of typically 12 V for Flash programming or erasing, but it has no clamp diode to VDD and must not be driven above VDD when Flash programming or erasing is not taking place.
2 PTA3/ACMPO/BKGD/MS bidirectional This pin is the mode-select pin during reset and then the BKGD background debug serial pin with an internal pullup enabled; when BKGDPE in SOPT is cleared it works as an output-only PTA3 or analog comparator output (ACMPO) pin, and BKGD is a pseudo-open-drain pin that should have no significant capacitance attached.
3 VDD power_in This is the primary power supply pin that supplies all I/O buffer circuitry and the internal voltage regulator, and should be bypassed with a bulk capacitor (for example 10 µF) and a 0.1 µF ceramic capacitor located as close to the pins as practical.
4 VSS power_in This is the ground (primary return) pin for the MCU.
5 PTA5/KBIP5 bidirectional This is a general-purpose I/O pin with keyboard interrupt capability (wakeup from stop/wait only); after reset it is a high-impedance input with pullup/pulldown disabled, and an enabled pull device is recommended to prevent extra leakage from the floating input.
6 PTA0/KBIP0/ACMP+ bidirectional This is a general-purpose I/O pin that can also act as a keyboard interrupt (stop/wait wakeup only) and as the positive analog comparator input (ACMP+), with analog function taking priority over digital when both are enabled.
7 PTA1/KBIP1/ACMP- bidirectional This is a general-purpose I/O pin that can also act as a keyboard interrupt (stop/wait wakeup only) and as the negative analog comparator input (ACMP-), with analog function taking priority over digital when both are enabled.
8 PTA4/KBIP4 bidirectional This is a general-purpose I/O pin with keyboard interrupt capability (wakeup from stop/wait only); after reset it is a high-impedance input with pullup/pulldown disabled, and an enabled pull device is recommended to prevent extra leakage from the floating input.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package SOIC-8
Category Embedded Processors & Controllers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.3 5.8 V 111
Maximum current into VDD IDD 120 mA 111
Digital input voltage VIn -0.3 V max printed as VDD + 0.3 V 111
Instantaneous maximum current, single pin limit (applies to all port pins) ID -25 25 mA 111
Storage temperature range Tstg -55 150 °C 111
Operating temperature range (packaged) TA -40 85 °C 112
Maximum junction temperature TJMAX 105 °C 112
Thermal resistance, junction-to-ambient, 8-pin SOIC θJA 160 °C/W 8-pin SOIC, 1s single-layer board, junction to ambient natural convection 112
Thermal resistance, junction-to-ambient, 8-pin SOIC θJA 98 °C/W 8-pin SOIC, 2s2p four-layer board, junction to ambient natural convection 112
Supply voltage (run, wait and stop modes) VDD 1.8 5.5 V 0 < fBus < 10 MHz 113
Minimum RAM retention supply voltage applied to VDD VRAM 0.8 1 V 113
Low-voltage detection threshold (VDD falling) VLVD 1.8 1.86 1.95 V VDD falling 113
Low-voltage detection threshold (VDD rising) VLVD 1.88 1.94 2.03 V VDD rising 113
Power on reset (POR) voltage VPOR 0.9 1.4 1.7 V 113
Input leakage current (per pin) /IIn/ 0.025 1 μA VIn = VDD or VSS, all input only pins 114
High impedance (off-state) leakage current (per pin) /IOZ/ 0.025 1 μA VIn = VDD or VSS, all input/output 114
Internal pullup/pulldown resistors (all port pins) RPU 20 45 65 kΩ VIn = VSS for pullup, VIn = VDD for pulldown 114
Maximum total IOH for all port pins /IOHT/ 40 mA 114
Output low voltage (port A) VOL 0.8 V IOL = 5 mA (VDD ≥ 4.5 V) 114
Maximum total IOL for all port pins IOLT 40 mA 114
DC injection current, single pin limit /IIC/ 0.2 mA VIn < VSS, VIn > VDD; single pin limit 114
DC injection current, total MCU limit /IIC/ 0.8 mA VIn < VSS, VIn > VDD; total MCU limit, includes sum of all stressed pins 114
Input capacitance (all non-supply pins) CIn 7 pF 114
Run supply current (fBus = 10 MHz) RIDD10 5.6 6.5 mA VDD = 5 V; typ at 25 °C, max at 85 °C; fBus = 10 MHz; no dc loads on port pins 117
Run supply current (fBus = 10 MHz) RIDD10 4.7 5.5 mA VDD = 3 V; typ at 25 °C, max at 85 °C; fBus = 10 MHz; no dc loads on port pins 117
Run supply current (fBus = 10 MHz) RIDD10 2.3 3 mA VDD = 1.8 V; typ at 25 °C, max at 85 °C; fBus = 10 MHz; no dc loads on port pins 117
Supply voltage VDD 1.8 5.5 V Analog comparator (ACMP) 119
Analog source impedance RAS 10 kΩ 119
Analog input offset voltage VAIO 20 40 mV 119
Analog Comparator hysteresis VH 3 9 15 mV 119
Analog Comparator bandgap reference voltage VBG 1.155 1.19 1.23 V 119
Supply current (active) IDDAC 20 35 μA 119
Average internal reference frequency - untrimmed fint_ut 25 31.25 41.66 kHz 119
Average internal reference frequency - trimmed fint_t 31.25 31.25 39.0625 kHz 119
DCO output frequency range - untrimmed fdco_ut 12.8 16 21.33 MHz 119
DCO output frequency range - trimmed fdco_t 16 16 20 MHz 119
Resolution of trimmed DCO output frequency Δfdco_res_t -0.2 0.2 %fdco at fixed voltage and temperature 119
Total deviation of trimmed DCO output frequency Δfdco_t -2 2 %fdco over voltage and temperature 119
FLL acquisition time tacquire 1 ms 119
Bus frequency fBus 10 MHz tcyc = 1/fBus 120
Real time interrupt internal oscillator period tRTI 700 1000 1300 μs 120
External RESET pulse width textrst 150 ns shortest pulse guaranteed through pin input filter 120
KBI pulse width in stop tKBIPWS 100 ns 120
Port rise and fall time tRise, tFall 11 ns load = 50 pF; slew rate control disabled (PTxSE = 0) 120
Port rise and fall time tRise, tFall 35 ns load = 50 pF; slew rate control enabled (PTxSE = 1) 120
Supply voltage for program/erase VDD 2.7 5.5 V program/erase 122
Program/Erase voltage VPP 11.8 12 12.2 V 122
VPP current, program IVPP_prog 200 μA program 122
VPP current, mass erase IVPP_erase 100 μA mass erase 122
Supply voltage for read operation VRead 1.8 5.5 V 0 < fBus < 10 MHz 122
Byte program time tprog 20 40 μs 122
Mass erase time tme 500 ms 122
Cumulative program HV time thv 8 ms same address cannot be programmed more than twice before next erase 122
Total cumulative HV time (total of tme & thv applied to device) thv_total 2 hours 122
HVEN to program setup time tpgs 10 μs 122
PGM/MASS to HVEN setup time tnvs 5 μs 122
Recovery time trcv 1 μs 122
Data retention tD_ret 15 100 years 122

CAD (KiCad official)

  • Symbol: MC9RS08KA1CSCR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mc9rs08ka1cscr-etched.step / mc9rs08ka1cscr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc9rs08ka1cscr.step / mc9rs08ka1cscr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (138 pp, sha256 b5790e9bafe95443, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF