Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLC7528IDWR

Texas Instruments · Digital To Analog Converters (DACs) · SOIC-20-300mil

TLC7528IDWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AGND power_in Analog ground terminal shared by both DACs; it is the return for the current-mode DAC outputs and is the reference point for the VDD and reference limits.
2 OUTA output DACA current output, which is switched between the DAC and AGND; in voltage mode it is held at a fixed input voltage that must not be forced below 0V.
3 RFBA passive DACA feedback resistor terminal for the internal feedback resistor, used for gain setting with an external op amp; feedback voltage is limited to ±25V to AGND.
4 REFA input DACA reference voltage input, specified at ±10V (absolute maximum ±25V to AGND); reference input impedance is 20 kΩ to AGND.
5 DGND power_in Digital ground for the control and data inputs; the voltage between AGND and DGND must not exceed ±VDD.
6 DACA/DACB input Control input that selects which DAC latch is loaded by a write cycle (DACA when high-level selects A per the mode table, DACB otherwise); it has a 50 ns setup and 10 ns hold requirement relative to WR and CS.
7 DB7 input Data bus bit 7 (MSB) of the 8-bit parallel input port; high-level input voltage VIH is 2.4V min at VDD = 5V and low-level VIL is 0.8V max.
8 DB6 input Data bus bit 6 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR.
9 DB5 input Data bus bit 5 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR.
10 DB4 input Data bus bit 4 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR.
11 DB3 input Data bus bit 3 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR.
12 DB2 input Data bus bit 2 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR.
13 DB1 input Data bus bit 1 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR.
14 DB0 input Data bus bit 0 (LSB) of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR.
15 CS input Chip select; when CS and WR are both low the input latches are transparent, and when CS is high the data inputs are disabled regardless of WR, with a 50 ns setup time.
16 WR input Write strobe; a low-level pulse of at least 50 ns latches the data bus into the DAC latch selected by DACA/DACB when CS is also low.
17 VDD power_in Positive supply input; the device operates from 5V to 15V (recommended 4.75V to 5.25V or 14.5V to 15.5V) with an absolute maximum of −0.3V to 16.5V to AGND or DGND.
18 REFB input DACB reference voltage input, specified at ±10V (absolute maximum ±25V to AGND); reference input impedance is 20 kΩ to AGND.
19 RFBB passive DACB feedback resistor terminal for the internal feedback resistor, used for gain setting with an external op amp; feedback voltage is limited to ±25V to AGND.
20 OUTB output DACB current output, which is switched between the DAC and AGND; in voltage mode it is held at a fixed input voltage that must not be forced below 0V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-20-300mil
Category Data Converters
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VDD -0.3 16.5 V to AGND or DGND 3
Reference voltage VrefA, VrefB -25 25 V to AGND 3
Feedback voltage VRFBA, VRFBB -25 25 V to AGND 3
Output voltage VOA, VOB -25 25 V to AGND 3
Input voltage range (digital) VI -0.3 V to DGND; upper limit VDD + 0.3 3
Peak input current 10 µA 3
Operating free-air temperature range (TLC7528I) TA -25 85 °C 3
Storage temperature range Tstg -65 150 °C 3
Lead temperature for 10 seconds 260 °C 1,6mm from case, 10 s, DW package 3
Reference voltage VrefA, VrefB -10 10 V VDD = 4.75V to 5.25V and 14.5V to 15.5V 3
High-level input voltage VIH 2.4 V VDD = 4.75V to 5.25V 3
High-level input voltage VIH 13.5 V VDD = 14.5V to 15.5V 3
Low-level input voltage VIL 0.8 V VDD = 4.75V to 5.25V 3
Low-level input voltage VIL 1.5 V VDD = 14.5V to 15.5V 3
Operating free-air temperature TA -25 85 °C TLC7528I 3
CS setup time tsu(CS) 50 ns VDD = 5V and 15V 3
CS hold time th(CS) 0 ns VDD = 5V and 15V 3
DAC select setup time tsu(DAC) 50 ns VDD = 5V and 15V 3
DAC select hold time th(DAC) 10 ns VDD = 5V and 15V 3
Data bus input setup time tsu(D) 25 ns VDD = 5V and 15V 3
Data bus input hold time th(D) 10 ns VDD = 5V and 15V 3
Pulse duration, WR low tw(WR) 50 ns VDD = 5V and 15V 3
High-level input current IIH 10 µA VI = VDD; VDD = 5V and 15V 4
Reference input impedance 20 kΩ REFA or REFB to AGND 4
Output leakage current OUTA/OUTB IIkg -400 400 nA DAC data latch loaded with 00000000, Vref = ±10V; VDD = 5V 4
Output leakage current OUTA/OUTB IIkg -200 200 nA DAC data latch loaded with 00000000, Vref = ±10V; VDD = 15V 4
Input resistance match (REFA to REFB) -1 1 % VDD = 5V and 15V 4
DC supply sensitivity ∆gain/∆VDD 0.04 %/% ∆VDD = ±10%; VDD = 5V 4
DC supply sensitivity ∆gain/∆VDD 0.02 %/% ∆VDD = ±10%; VDD = 15V 4
Supply current (quiescent) IDD 2 mA All digital inputs at VIHmin or VILmax; VDD = 5V and 15V 4
Supply current (standby) IDD 0.5 mA All digital inputs at 0V or VDD; VDD = 5V and 15V 4
Input capacitance DB0-DB7 Ci 10 pF VDD = 5V and 15V 4
Input capacitance WR, CS, DACA/DACB Ci 15 pF VDD = 5V and 15V 4
Output capacitance (OUTA, OUTB) Co 50 pF DAC data latches loaded with 00000000 4
Output capacitance (OUTA, OUTB) Co 120 pF DAC data latches loaded with 11111111 4
Gain error 2.5 LSB See Note 2; VDD = 5V and 15V 5
Settling time (to 1/2LSB) 100 ns See Note 1 5
Propagation delay 80 ns See Note 5 5
Temperature coefficient of gain 0.007 %FSR/°C See Note 4; VDD = 5V 5
Temperature coefficient of gain 0.0035 %FSR/°C See Note 4; VDD = 15V 5

CAD (KiCad official)

  • Symbol: TLC7528IDWR
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: tlc7528idwr-etched.step / tlc7528idwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc7528idwr.step / tlc7528idwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 63cd9d470d8a8f3e, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF