Generated by kicad-footprint-generator · KiCad file format 20260206
TLC7528IDWR
Texas Instruments · Digital To Analog Converters (DACs) · SOIC-20-300mil
TLC7528IDWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AGND | power_in | Analog ground terminal shared by both DACs; it is the return for the current-mode DAC outputs and is the reference point for the VDD and reference limits. |
| 2 | OUTA | output | DACA current output, which is switched between the DAC and AGND; in voltage mode it is held at a fixed input voltage that must not be forced below 0V. |
| 3 | RFBA | passive | DACA feedback resistor terminal for the internal feedback resistor, used for gain setting with an external op amp; feedback voltage is limited to ±25V to AGND. |
| 4 | REFA | input | DACA reference voltage input, specified at ±10V (absolute maximum ±25V to AGND); reference input impedance is 20 kΩ to AGND. |
| 5 | DGND | power_in | Digital ground for the control and data inputs; the voltage between AGND and DGND must not exceed ±VDD. |
| 6 | DACA/DACB | input | Control input that selects which DAC latch is loaded by a write cycle (DACA when high-level selects A per the mode table, DACB otherwise); it has a 50 ns setup and 10 ns hold requirement relative to WR and CS. |
| 7 | DB7 | input | Data bus bit 7 (MSB) of the 8-bit parallel input port; high-level input voltage VIH is 2.4V min at VDD = 5V and low-level VIL is 0.8V max. |
| 8 | DB6 | input | Data bus bit 6 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR. |
| 9 | DB5 | input | Data bus bit 5 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR. |
| 10 | DB4 | input | Data bus bit 4 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR. |
| 11 | DB3 | input | Data bus bit 3 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR. |
| 12 | DB2 | input | Data bus bit 2 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR. |
| 13 | DB1 | input | Data bus bit 1 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR. |
| 14 | DB0 | input | Data bus bit 0 (LSB) of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR. |
| 15 | CS | input | Chip select; when CS and WR are both low the input latches are transparent, and when CS is high the data inputs are disabled regardless of WR, with a 50 ns setup time. |
| 16 | WR | input | Write strobe; a low-level pulse of at least 50 ns latches the data bus into the DAC latch selected by DACA/DACB when CS is also low. |
| 17 | VDD | power_in | Positive supply input; the device operates from 5V to 15V (recommended 4.75V to 5.25V or 14.5V to 15.5V) with an absolute maximum of −0.3V to 16.5V to AGND or DGND. |
| 18 | REFB | input | DACB reference voltage input, specified at ±10V (absolute maximum ±25V to AGND); reference input impedance is 20 kΩ to AGND. |
| 19 | RFBB | passive | DACB feedback resistor terminal for the internal feedback resistor, used for gain setting with an external op amp; feedback voltage is limited to ±25V to AGND. |
| 20 | OUTB | output | DACB current output, which is switched between the DAC and AGND; in voltage mode it is held at a fixed input voltage that must not be forced below 0V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | Data Converters |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VDD | -0.3 | 16.5 | V | to AGND or DGND | 3 | |
| Reference voltage | VrefA, VrefB | -25 | 25 | V | to AGND | 3 | |
| Feedback voltage | VRFBA, VRFBB | -25 | 25 | V | to AGND | 3 | |
| Output voltage | VOA, VOB | -25 | 25 | V | to AGND | 3 | |
| Input voltage range (digital) | VI | -0.3 | V | to DGND; upper limit VDD + 0.3 | 3 | ||
| Peak input current | 10 | µA | 3 | ||||
| Operating free-air temperature range (TLC7528I) | TA | -25 | 85 | °C | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Lead temperature for 10 seconds | 260 | °C | 1,6mm from case, 10 s, DW package | 3 | |||
| Reference voltage | VrefA, VrefB | -10 | 10 | V | VDD = 4.75V to 5.25V and 14.5V to 15.5V | 3 | |
| High-level input voltage | VIH | 2.4 | V | VDD = 4.75V to 5.25V | 3 | ||
| High-level input voltage | VIH | 13.5 | V | VDD = 14.5V to 15.5V | 3 | ||
| Low-level input voltage | VIL | 0.8 | V | VDD = 4.75V to 5.25V | 3 | ||
| Low-level input voltage | VIL | 1.5 | V | VDD = 14.5V to 15.5V | 3 | ||
| Operating free-air temperature | TA | -25 | 85 | °C | TLC7528I | 3 | |
| CS setup time | tsu(CS) | 50 | ns | VDD = 5V and 15V | 3 | ||
| CS hold time | th(CS) | 0 | ns | VDD = 5V and 15V | 3 | ||
| DAC select setup time | tsu(DAC) | 50 | ns | VDD = 5V and 15V | 3 | ||
| DAC select hold time | th(DAC) | 10 | ns | VDD = 5V and 15V | 3 | ||
| Data bus input setup time | tsu(D) | 25 | ns | VDD = 5V and 15V | 3 | ||
| Data bus input hold time | th(D) | 10 | ns | VDD = 5V and 15V | 3 | ||
| Pulse duration, WR low | tw(WR) | 50 | ns | VDD = 5V and 15V | 3 | ||
| High-level input current | IIH | 10 | µA | VI = VDD; VDD = 5V and 15V | 4 | ||
| Reference input impedance | 20 | kΩ | REFA or REFB to AGND | 4 | |||
| Output leakage current OUTA/OUTB | IIkg | -400 | 400 | nA | DAC data latch loaded with 00000000, Vref = ±10V; VDD = 5V | 4 | |
| Output leakage current OUTA/OUTB | IIkg | -200 | 200 | nA | DAC data latch loaded with 00000000, Vref = ±10V; VDD = 15V | 4 | |
| Input resistance match (REFA to REFB) | -1 | 1 | % | VDD = 5V and 15V | 4 | ||
| DC supply sensitivity | ∆gain/∆VDD | 0.04 | %/% | ∆VDD = ±10%; VDD = 5V | 4 | ||
| DC supply sensitivity | ∆gain/∆VDD | 0.02 | %/% | ∆VDD = ±10%; VDD = 15V | 4 | ||
| Supply current (quiescent) | IDD | 2 | mA | All digital inputs at VIHmin or VILmax; VDD = 5V and 15V | 4 | ||
| Supply current (standby) | IDD | 0.5 | mA | All digital inputs at 0V or VDD; VDD = 5V and 15V | 4 | ||
| Input capacitance DB0-DB7 | Ci | 10 | pF | VDD = 5V and 15V | 4 | ||
| Input capacitance WR, CS, DACA/DACB | Ci | 15 | pF | VDD = 5V and 15V | 4 | ||
| Output capacitance (OUTA, OUTB) | Co | 50 | pF | DAC data latches loaded with 00000000 | 4 | ||
| Output capacitance (OUTA, OUTB) | Co | 120 | pF | DAC data latches loaded with 11111111 | 4 | ||
| Gain error | 2.5 | LSB | See Note 2; VDD = 5V and 15V | 5 | |||
| Settling time (to 1/2LSB) | 100 | ns | See Note 1 | 5 | |||
| Propagation delay | 80 | ns | See Note 5 | 5 | |||
| Temperature coefficient of gain | 0.007 | %FSR/°C | See Note 4; VDD = 5V | 5 | |||
| Temperature coefficient of gain | 0.0035 | %FSR/°C | See Note 4; VDD = 15V | 5 |
CAD (KiCad official)
- Symbol:
TLC7528IDWR - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
tlc7528idwr-etched.step/tlc7528idwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc7528idwr.step/tlc7528idwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
63cd9d470d8a8f3e, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).