main
Ray Publish 0.1.0 8aef5e2
{
  "slug": "tlc7528idwr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Digital To Analog Converters (DACs), SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data converters",
    "tlc7528idwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlc7528idwr.kicad_sym",
    "tlc7528idwr.kicad_mod",
    "tlc7528idwr.glb",
    "tlc7528idwr.step",
    "tlc7528idwr.lbr",
    "docs/hero.png",
    "docs/tlc7528idwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tlc7528idwr-hero.glb",
    "tlc7528idwr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TLC7528IDWR",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-20-300mil",
    "pin_count": 20,
    "category": "Data Converters",
    "subcategory": "Digital To Analog Converters (DACs)",
    "datasheet": "https://www.ti.com/lit/ds/symlink/tlc7528.pdf",
    "parts": {
      "symbol": "tlc7528idwr.kicad_sym",
      "footprint": "tlc7528idwr.kicad_mod",
      "model_3d": "tlc7528idwr-hero.glb",
      "model_3d_plain": "tlc7528idwr.glb",
      "model_3d_step": "tlc7528idwr-etched.step",
      "model_3d_step_plain": "tlc7528idwr.step",
      "lbr": "tlc7528idwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2679603",
      "digikey": "TLC7528IDWR-ND",
      "mouser": "595-TLC7528IDWR"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T08:18:33Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "TLC7528IDWR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-TLC7528IDWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground terminal shared by both DACs; it is the return for the current-mode DAC outputs and is the reference point for the VDD and reference limits."
      },
      {
        "number": "2",
        "name": "OUTA",
        "type": "output",
        "description": "DACA current output, which is switched between the DAC and AGND; in voltage mode it is held at a fixed input voltage that must not be forced below 0V."
      },
      {
        "number": "3",
        "name": "RFBA",
        "type": "passive",
        "description": "DACA feedback resistor terminal for the internal feedback resistor, used for gain setting with an external op amp; feedback voltage is limited to ±25V to AGND."
      },
      {
        "number": "4",
        "name": "REFA",
        "type": "input",
        "description": "DACA reference voltage input, specified at ±10V (absolute maximum ±25V to AGND); reference input impedance is 20 kΩ to AGND."
      },
      {
        "number": "5",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground for the control and data inputs; the voltage between AGND and DGND must not exceed ±VDD."
      },
      {
        "number": "6",
        "name": "DACA/DACB",
        "type": "input",
        "description": "Control input that selects which DAC latch is loaded by a write cycle (DACA when high-level selects A per the mode table, DACB otherwise); it has a 50 ns setup and 10 ns hold requirement relative to WR and CS."
      },
      {
        "number": "7",
        "name": "DB7",
        "type": "input",
        "description": "Data bus bit 7 (MSB) of the 8-bit parallel input port; high-level input voltage VIH is 2.4V min at VDD = 5V and low-level VIL is 0.8V max."
      },
      {
        "number": "8",
        "name": "DB6",
        "type": "input",
        "description": "Data bus bit 6 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR."
      },
      {
        "number": "9",
        "name": "DB5",
        "type": "input",
        "description": "Data bus bit 5 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR."
      },
      {
        "number": "10",
        "name": "DB4",
        "type": "input",
        "description": "Data bus bit 4 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR."
      },
      {
        "number": "11",
        "name": "DB3",
        "type": "input",
        "description": "Data bus bit 3 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR."
      },
      {
        "number": "12",
        "name": "DB2",
        "type": "input",
        "description": "Data bus bit 2 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR."
      },
      {
        "number": "13",
        "name": "DB1",
        "type": "input",
        "description": "Data bus bit 1 of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR."
      },
      {
        "number": "14",
        "name": "DB0",
        "type": "input",
        "description": "Data bus bit 0 (LSB) of the 8-bit parallel input port; it has a data setup time of 25 ns and hold time of 10 ns relative to WR."
      },
      {
        "number": "15",
        "name": "CS",
        "type": "input",
        "description": "Chip select; when CS and WR are both low the input latches are transparent, and when CS is high the data inputs are disabled regardless of WR, with a 50 ns setup time."
      },
      {
        "number": "16",
        "name": "WR",
        "type": "input",
        "description": "Write strobe; a low-level pulse of at least 50 ns latches the data bus into the DAC latch selected by DACA/DACB when CS is also low."
      },
      {
        "number": "17",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply input; the device operates from 5V to 15V (recommended 4.75V to 5.25V or 14.5V to 15.5V) with an absolute maximum of −0.3V to 16.5V to AGND or DGND."
      },
      {
        "number": "18",
        "name": "REFB",
        "type": "input",
        "description": "DACB reference voltage input, specified at ±10V (absolute maximum ±25V to AGND); reference input impedance is 20 kΩ to AGND."
      },
      {
        "number": "19",
        "name": "RFBB",
        "type": "passive",
        "description": "DACB feedback resistor terminal for the internal feedback resistor, used for gain setting with an external op amp; feedback voltage is limited to ±25V to AGND."
      },
      {
        "number": "20",
        "name": "OUTB",
        "type": "output",
        "description": "DACB current output, which is switched between the DAC and AGND; in voltage mode it is held at a fixed input voltage that must not be forced below 0V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbering was taken from the 'DW, N OR PW PACKAGE (TOP VIEW)' diagram on page 1, which the datas; The datasheet does not give a KiCad ERC class for RFBA/RFBB; 'passive' was chosen because they conne; The datasheet's mode-selection table defines DACA/DACB as the DAC select, but the polarity mapping i"
        ],
        "pages_sent": 33,
        "cost_usd": 0.1174,
        "at": "2026-11-13T08:18:26"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/tlc7528.pdf",
        "pages": 33,
        "sha256": "63cd9d470d8a8f3e",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tlc7528idwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlc7528idwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b7157f9cd0c54e1c0071553036c83b1ee3ce337e83e80b3eb319252d03717135",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DW0020A",
      "source_page": 27,
      "D": {
        "nom_mm": 12.8,
        "range_mm": [
          12.6,
          13.0
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.3,
        "range_mm": [
          9.97,
          10.63
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.65,
        "range_mm": [
          null,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "tlc7528idwr.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}