3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP1703-2502E
Microchip Tech · Linear Voltage Regulators (LDO) · SOT-223-3
MCP1703-2502E from Microchip Tech, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply with an operating range of 2.7V to 16.0V; low source impedance is needed for stable operation, and about 1 µF of capacitance suffices for most applications. |
| 2 | GND | power_in | Regulator ground that carries only the 2.0 µA typical LDO bias current; the output regulation is referenced to this pin, and the tab is also GND per the package marking note. |
| 3 | VOUT | power_out | Regulated output that delivers the full DC load current, up to 250 mA, and should be connected close to the output capacitor (stable with 1.0 µF to 22 µF ceramic). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-223-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.7 | 16 | V | Note 1 | 3 | |
| Input Quiescent Current | Iq | 2 | 5 | µA | IL = 0 mA | 3 | |
| Maximum Output Current (VR ≥ 2.5V) | IOUT_mA | 250 | mA | For VR ≥ 2.5V | 3 | ||
| Output Voltage Regulation (VR ±2.0%, 2.0% standard tolerance) | VOUT | -2 | 0.4 | 2 | % | 3 | |
| Line Regulation | ΔVOUT/(VOUTxΔVIN) | -0.3 | 0.1 | 0.3 | %/V | (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 16V, Note 1 | 3 |
| Load Regulation | ΔVOUT/VOUT | -2.5 | 1 | 2.5 | % | IL = 1.0 mA to 250 mA for VR >= 2.5V; VIN = 3.65V, Note 4 | 3 |
| Dropout Voltage (2.5V ≤ VR < 2.8V) | VDROPOUT | 750 | 1100 | mV | IL = 250 mA, 2.5V ≤ VR < 2.8V | 4 | |
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 4 | |
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 4 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Supply Voltage (absolute maximum, VDD) | VDD | 18 | V | 3 | |||
| ESD Protection HBM | 4 | kV | HBM | 3 | |||
| ESD Protection MM | 400 | V | MM | 3 | |||
| Thermal Resistance, Junction to Ambient (3LD SOT-223) | θJA | 62 | °C/W | EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board | 4 | ||
| Thermal Resistance, Junction to Case (3LD SOT-223) | θJC | 15 | °C/W | EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board | 4 |
CAD (KiCad official)
- Symbol:
MCP1703-2502E - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files:
mcp1703-2502e-etched.step/mcp1703-2502e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1703-2502e.step/mcp1703-2502e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (32 pp, sha256
7bfdaa05d529bf00, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).