main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp1703-2502e: viewers · Ray
mcp1703-2502e-etched.glb Publish 0.1.0 · Ray
mcp1703-2502e-etched.step mcp1703-2502e: factory component page (tier=mfr) · Ray
mcp1703-2502e-hero.glb mcp1703-2502e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp1703-2502e-hero.overlay.json Publish 0.1.0 · Ray
mcp1703-2502e.glb Publish 0.1.0 · Ray
mcp1703-2502e.kicad_mod Publish 0.1.0 · Ray
mcp1703-2502e.kicad_sym Publish 0.1.0 · Ray
mcp1703-2502e.lbr Publish 0.1.0 · Ray
mcp1703-2502e.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 3 pins · Ray

MCP1703-2502E

Microchip Tech · Linear Voltage Regulators (LDO) · SOT-223-3

MCP1703-2502E from Microchip Tech, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated input supply with an operating range of 2.7V to 16.0V; low source impedance is needed for stable operation, and about 1 µF of capacitance suffices for most applications.
2 GND power_in Regulator ground that carries only the 2.0 µA typical LDO bias current; the output regulation is referenced to this pin, and the tab is also GND per the package marking note.
3 VOUT power_out Regulated output that delivers the full DC load current, up to 250 mA, and should be connected close to the output capacitor (stable with 1.0 µF to 22 µF ceramic).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-223-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.7 16 V Note 1 3
Input Quiescent Current Iq 2 5 µA IL = 0 mA 3
Maximum Output Current (VR ≥ 2.5V) IOUT_mA 250 mA For VR ≥ 2.5V 3
Output Voltage Regulation (VR ±2.0%, 2.0% standard tolerance) VOUT -2 0.4 2 % 3
Line Regulation ΔVOUT/(VOUTxΔVIN) -0.3 0.1 0.3 %/V (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 16V, Note 1 3
Load Regulation ΔVOUT/VOUT -2.5 1 2.5 % IL = 1.0 mA to 250 mA for VR >= 2.5V; VIN = 3.65V, Note 4 3
Dropout Voltage (2.5V ≤ VR < 2.8V) VDROPOUT 750 1100 mV IL = 250 mA, 2.5V ≤ VR < 2.8V 4
Operating Junction Temperature Range TJ -40 125 °C Steady State 4
Maximum Junction Temperature TJ 150 °C Transient 4
Storage Temperature Range TA -65 150 °C 4
Supply Voltage (absolute maximum, VDD) VDD 18 V 3
ESD Protection HBM 4 kV HBM 3
ESD Protection MM 400 V MM 3
Thermal Resistance, Junction to Ambient (3LD SOT-223) θJA 62 °C/W EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board 4
Thermal Resistance, Junction to Case (3LD SOT-223) θJC 15 °C/W EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board 4

CAD (KiCad official)

  • Symbol: MCP1703-2502E
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223-3 (KiCad packages3D, STEP)
  • 3D model files: mcp1703-2502e-etched.step / mcp1703-2502e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1703-2502e.step / mcp1703-2502e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 7bfdaa05d529bf00, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF