component
DAC8168ICPW
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDAC8168ICPW
Texas Instruments · Digital To Analog Converters (DAC) · TSSOP-16
DAC8168ICPW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LDAC | input | Load DACs control input; the datasheet pin table gives no further electrical limits for this pin. |
| 2 | SYNC | input | Active-low, level-triggered frame sync input: data are sampled on subsequent falling SCLK edges after SYNC goes low, the DAC output updates after the 32nd clock, and a SYNC rising edge before the 31st clock is an interrupt that causes the write to be ignored (Schmitt-Trigger input). |
| 3 | AVDD | power_in | Power supply input, 2.7 V to 5.5 V. |
| 4 | VOUTA | output | Analog output voltage from DAC A. |
| 5 | VOUTC | output | Analog output voltage from DAC C. |
| 6 | VOUTE | output | Analog output voltage from DAC E. |
| 7 | VOUTG | output | Analog output voltage from DAC G. |
| 8 | VREFIN/VREFOUT | bidirectional | Positive reference input / reference output; provides 2.5 V when the internal reference is used, and for grade C devices the external VREFIN (max) must be ≤ AVDD/2. |
| 9 | CLR | input | Asynchronous clear input. |
| 10 | VOUTH | output | Analog output voltage from DAC H. |
| 11 | VOUTF | output | Analog output voltage from DAC F. |
| 12 | VOUTD | output | Analog output voltage from DAC D. |
| 13 | VOUTB | output | Analog output voltage from DAC B. |
| 14 | GND | power_in | Ground reference point for all circuitry on the device. |
| 15 | DIN | input | Serial data input clocked into the 32-bit input shift register on each falling SCLK edge (Schmitt-Trigger input). |
| 16 | SCLK | input | Serial clock input supporting data transfer at rates up to 50 MHz (Schmitt-Trigger input). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
DAC8168ICPW - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
dac8168icpw-etched.step/dac8168icpw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dac8168icpw.step/dac8168icpw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (72 pp, sha256
e14f8beb0a8c704b, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).