Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT6105HDCB#TRMPBF

Analog Devices · Pre-ordered Chips · DFN-6(2x3)

LT6105HDCB#TRMPBF from Analog Devices, in a DFN-6(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 -IN input Negative sense voltage input remains functional for voltages up to 44V referred to V-; connect it to the external gain-setting resistor RIN1 (RIN1 = RIN2) to set the gain.
2 V+ power_in Power supply voltage pin that supplies the amplifier and can operate from 2.85V to 36V, independent of the voltages on the -IN or +IN pins.
3 V- power_in Negative power supply voltage, or ground for single supply operation.
4 VOUT output Voltage output given by VOUT = AV x (VSENSE +/- VOS), where AV is set by the external RIN1, RIN2 and ROUT resistors (AV = ROUT/RIN1 for RIN1 = RIN2).
5 NC unconnected Not connected internally.
6 +IN input Positive sense input remains functional for voltages up to 44V referred to V-; connect it to the external gain-setting resistor RIN2 to set the gain.
7 V- (exposed pad) power_in Exposed pad is connected to the V- pin and should be connected to the V- trace of the PCB or left floating.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-6(2x3)
Category Interface ICs
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range (VS+, VS-) VS+, VS- -0.3 44 V Guaranteed by CMRR 5
Input Voltage Range (VS+, VS-), second line VS+, VS- -0.1 44 V Guaranteed by CMRR 5
Input Voltage V(+IN, -IN) to V- V(+IN, -IN) -9.5 44 V Referenced to V- 2
Differential Input Voltage (+IN, -IN) +IN, -IN -44 44 V 2
Total V+ Supply Voltage from V- V+ 36 V From V- 2
Output Voltage VOUT 36 V Printed as V- to (V- + 36V) 2
Operating Temperature Range (LT6105H) TA -40 125 °C LT6105H 2
Specified Temperature Range (LT6105H) TA -40 125 °C LT6105H 2
Maximum Junction Temperature TJMAX 150 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Thermal Resistance Junction-to-Ambient (DCB DFN package) θJA 64 °C/W DCB 6-lead DFN package 2
Voltage Gain Error (VS+ = 12V, 25°C) AV -1 0.1 1 % VSENSE = 25mV to 75mV, VS+ = 12V 5
Voltage Gain Error (VS+ = 12V, over temperature) AV -1.5 1.5 % VSENSE = 25mV to 75mV, VS+ = 12V 5
Voltage Gain Error (VS+ = 0V) AV -3.25 3.25 % VSENSE = 25mV to 75mV, VS+ = 0V 5
Input Offset Voltage, DCB Package (25°C) VOS -0.4 -0.1 0.4 mV VSENSE = 5mV 5
Input Offset Voltage, DCB Package (over temperature) VOS -0.9 0.9 mV VSENSE = 5mV 5
Input Offset Voltage (VS+ = 0V, 25°C) VOS -1 -0.3 1 mV VSENSE = 5mV, VS+ = 0V 5
Input Offset Voltage (VS+ = 0V, over temperature) VOS -1.6 1.6 mV VSENSE = 5mV, VS+ = 0V 5
Input Common Mode Rejection Ratio (25°C) CMRR 100 120 dB VSENSE = 5mV, VS+ = 2.8V to 44V 5
Input Common Mode Rejection Ratio (over temperature) CMRR 95 dB VSENSE = 5mV, VS+ = 2.8V to 44V 5
Input Common Mode Rejection Ratio CMRR 94 dB VSENSE = 5mV, VS+ = -0.3V to 44V 5
Input Common Mode Rejection Ratio (over temperature) CMRR 80 dB VSENSE = 5mV, VS+ = -0.1V to 44V 5
V+ Power Supply Voltage Range V+ 2.85 36 V Guaranteed by PSRR 5
Power Supply Rejection Ratio (VS+ = 12V, 25°C) PSRR 98 120 dB VSENSE = 5mV, VS+ = 12V, V+ = 2.85V to 36V 5
Power Supply Rejection Ratio (VS+ = 12V, over temperature) PSRR 94 dB VSENSE = 5mV, VS+ = 12V, V+ = 2.85V to 36V 5
Power Supply Rejection Ratio (VS+ = 0V, 25°C) PSRR 98 120 dB VSENSE = 5mV, VS+ = 0V, V+ = 2.85V to 36V 5
Power Supply Rejection Ratio (VS+ = 0V, over temperature) PSRR 94 dB VSENSE = 5mV, VS+ = 0V, V+ = 2.85V to 36V 5
Input Current (VS+ = 3V) I(+IN), I(-IN) 18 30 μA VSENSE = 0V, VS+ = 3V 5
Input Current (VS+ = 0V) I(+IN), I(-IN) -0.05 μA VSENSE = 0V, VS+ = 0V 5
Input Offset Current (VS+ = 3V) I(+IN), I(-IN) 0.35 0.8 μA VSENSE = 0V, VS+ = 3V 5
Input Offset Current (VS+ = 0V) I(+IN), I(-IN) 0.1 μA VSENSE = 0V, VS+ = 0V 5
Input Current (Power-Down) I(+IN) + I(-IN) 0.5 2.5 μA V+ = 0V, VS+ = 44V, VSENSE = 0V 5
V+ Supply Current (V+ = 2.85V) IS 240 300 μA VSENSE = 0V, VS+ = 3V, V+ = 2.85V 5
V+ Supply Current (V+ = 36V) IS 350 450 μA VSENSE = 0V, VS+ = 3V, V+ = 36V 5
Minimum Output Voltage VO(MIN) 45 mV VSENSE = 0mV, VS+ = 44V, V+ = 36V 5
Output High (Referred to V+) VO(MAX) 1.3 1.7 V VSENSE = 120mV, AV = 100, ROUT = 10k 5
Maximum Output Current IOUT 1 mA Guaranteed by VO(MAX) 5
Reverse Input Voltage (Referred to V-) VREV -9.5 -12 V I(+IN) + I(-IN) = -5mA 5
Input Offset Voltage Temperature Coefficient ΔVOS/ΔT 0.5 μV/°C 5
Short-Circuit Output Current ISC 1.5 mA VS+ = 44V, VS- = 0V, ROUT = 0Ω 5
Slew Rate SR 1.75 2 V/μs VSENSE = 5mV to 150mV, AV = 50V/V, RIN = 400Ω 5
-3dB Bandwidth BW 100 kHz VSENSE = 50mV, AV = 10V/V 5
Output Settling to 1% of Final Value tS 5 μs VSENSE = 5mV to 100mV 5
Input Step Response tr 3 μs VSENSE = 5mV to 100mV 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 5mA. Neglecting contact resistance at solder joints, even one square of PC board copper at each resistor end will 13

CAD (KiCad official)

  • Symbol: LT6105HDCB#TRMPBF
  • Footprint: Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm
  • 3D model: DFN-6(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lt6105hdcb-etched.step / lt6105hdcb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6105hdcb.step / lt6105hdcb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 8874173461ac8e2a, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF