Generated by kicad-footprint-generator · KiCad file format 20260206
LT6105HDCB#TRMPBF
Analog Devices · Pre-ordered Chips · DFN-6(2x3)
LT6105HDCB#TRMPBF from Analog Devices, in a DFN-6(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative sense voltage input remains functional for voltages up to 44V referred to V-; connect it to the external gain-setting resistor RIN1 (RIN1 = RIN2) to set the gain. |
| 2 | V+ | power_in | Power supply voltage pin that supplies the amplifier and can operate from 2.85V to 36V, independent of the voltages on the -IN or +IN pins. |
| 3 | V- | power_in | Negative power supply voltage, or ground for single supply operation. |
| 4 | VOUT | output | Voltage output given by VOUT = AV x (VSENSE +/- VOS), where AV is set by the external RIN1, RIN2 and ROUT resistors (AV = ROUT/RIN1 for RIN1 = RIN2). |
| 5 | NC | unconnected | Not connected internally. |
| 6 | +IN | input | Positive sense input remains functional for voltages up to 44V referred to V-; connect it to the external gain-setting resistor RIN2 to set the gain. |
| 7 | V- (exposed pad) | power_in | Exposed pad is connected to the V- pin and should be connected to the V- trace of the PCB or left floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-6(2x3) |
| Category | Interface ICs |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range (VS+, VS-) | VS+, VS- | -0.3 | 44 | V | Guaranteed by CMRR | 5 | |
| Input Voltage Range (VS+, VS-), second line | VS+, VS- | -0.1 | 44 | V | Guaranteed by CMRR | 5 | |
| Input Voltage V(+IN, -IN) to V- | V(+IN, -IN) | -9.5 | 44 | V | Referenced to V- | 2 | |
| Differential Input Voltage (+IN, -IN) | +IN, -IN | -44 | 44 | V | 2 | ||
| Total V+ Supply Voltage from V- | V+ | 36 | V | From V- | 2 | ||
| Output Voltage | VOUT | 36 | V | Printed as V- to (V- + 36V) | 2 | ||
| Operating Temperature Range (LT6105H) | TA | -40 | 125 | °C | LT6105H | 2 | |
| Specified Temperature Range (LT6105H) | TA | -40 | 125 | °C | LT6105H | 2 | |
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Thermal Resistance Junction-to-Ambient (DCB DFN package) | θJA | 64 | °C/W | DCB 6-lead DFN package | 2 | ||
| Voltage Gain Error (VS+ = 12V, 25°C) | AV | -1 | 0.1 | 1 | % | VSENSE = 25mV to 75mV, VS+ = 12V | 5 |
| Voltage Gain Error (VS+ = 12V, over temperature) | AV | -1.5 | 1.5 | % | VSENSE = 25mV to 75mV, VS+ = 12V | 5 | |
| Voltage Gain Error (VS+ = 0V) | AV | -3.25 | 3.25 | % | VSENSE = 25mV to 75mV, VS+ = 0V | 5 | |
| Input Offset Voltage, DCB Package (25°C) | VOS | -0.4 | -0.1 | 0.4 | mV | VSENSE = 5mV | 5 |
| Input Offset Voltage, DCB Package (over temperature) | VOS | -0.9 | 0.9 | mV | VSENSE = 5mV | 5 | |
| Input Offset Voltage (VS+ = 0V, 25°C) | VOS | -1 | -0.3 | 1 | mV | VSENSE = 5mV, VS+ = 0V | 5 |
| Input Offset Voltage (VS+ = 0V, over temperature) | VOS | -1.6 | 1.6 | mV | VSENSE = 5mV, VS+ = 0V | 5 | |
| Input Common Mode Rejection Ratio (25°C) | CMRR | 100 | 120 | dB | VSENSE = 5mV, VS+ = 2.8V to 44V | 5 | |
| Input Common Mode Rejection Ratio (over temperature) | CMRR | 95 | dB | VSENSE = 5mV, VS+ = 2.8V to 44V | 5 | ||
| Input Common Mode Rejection Ratio | CMRR | 94 | dB | VSENSE = 5mV, VS+ = -0.3V to 44V | 5 | ||
| Input Common Mode Rejection Ratio (over temperature) | CMRR | 80 | dB | VSENSE = 5mV, VS+ = -0.1V to 44V | 5 | ||
| V+ Power Supply Voltage Range | V+ | 2.85 | 36 | V | Guaranteed by PSRR | 5 | |
| Power Supply Rejection Ratio (VS+ = 12V, 25°C) | PSRR | 98 | 120 | dB | VSENSE = 5mV, VS+ = 12V, V+ = 2.85V to 36V | 5 | |
| Power Supply Rejection Ratio (VS+ = 12V, over temperature) | PSRR | 94 | dB | VSENSE = 5mV, VS+ = 12V, V+ = 2.85V to 36V | 5 | ||
| Power Supply Rejection Ratio (VS+ = 0V, 25°C) | PSRR | 98 | 120 | dB | VSENSE = 5mV, VS+ = 0V, V+ = 2.85V to 36V | 5 | |
| Power Supply Rejection Ratio (VS+ = 0V, over temperature) | PSRR | 94 | dB | VSENSE = 5mV, VS+ = 0V, V+ = 2.85V to 36V | 5 | ||
| Input Current (VS+ = 3V) | I(+IN), I(-IN) | 18 | 30 | μA | VSENSE = 0V, VS+ = 3V | 5 | |
| Input Current (VS+ = 0V) | I(+IN), I(-IN) | -0.05 | μA | VSENSE = 0V, VS+ = 0V | 5 | ||
| Input Offset Current (VS+ = 3V) | I(+IN), I(-IN) | 0.35 | 0.8 | μA | VSENSE = 0V, VS+ = 3V | 5 | |
| Input Offset Current (VS+ = 0V) | I(+IN), I(-IN) | 0.1 | μA | VSENSE = 0V, VS+ = 0V | 5 | ||
| Input Current (Power-Down) | I(+IN) + I(-IN) | 0.5 | 2.5 | μA | V+ = 0V, VS+ = 44V, VSENSE = 0V | 5 | |
| V+ Supply Current (V+ = 2.85V) | IS | 240 | 300 | μA | VSENSE = 0V, VS+ = 3V, V+ = 2.85V | 5 | |
| V+ Supply Current (V+ = 36V) | IS | 350 | 450 | μA | VSENSE = 0V, VS+ = 3V, V+ = 36V | 5 | |
| Minimum Output Voltage | VO(MIN) | 45 | mV | VSENSE = 0mV, VS+ = 44V, V+ = 36V | 5 | ||
| Output High (Referred to V+) | VO(MAX) | 1.3 | 1.7 | V | VSENSE = 120mV, AV = 100, ROUT = 10k | 5 | |
| Maximum Output Current | IOUT | 1 | mA | Guaranteed by VO(MAX) | 5 | ||
| Reverse Input Voltage (Referred to V-) | VREV | -9.5 | -12 | V | I(+IN) + I(-IN) = -5mA | 5 | |
| Input Offset Voltage Temperature Coefficient | ΔVOS/ΔT | 0.5 | μV/°C | 5 | |||
| Short-Circuit Output Current | ISC | 1.5 | mA | VS+ = 44V, VS- = 0V, ROUT = 0Ω | 5 | ||
| Slew Rate | SR | 1.75 | 2 | V/μs | VSENSE = 5mV to 150mV, AV = 50V/V, RIN = 400Ω | 5 | |
| -3dB Bandwidth | BW | 100 | kHz | VSENSE = 50mV, AV = 10V/V | 5 | ||
| Output Settling to 1% of Final Value | tS | 5 | μs | VSENSE = 5mV to 100mV | 5 | ||
| Input Step Response | tr | 3 | μs | VSENSE = 5mV to 100mV | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 5mA. Neglecting contact resistance at solder joints, even one square of PC board copper at each resistor end will | 13 |
CAD (KiCad official)
- Symbol:
LT6105HDCB#TRMPBF - Footprint:
Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm - 3D model: DFN-6(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lt6105hdcb-etched.step/lt6105hdcb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6105hdcb.step/lt6105hdcb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
8874173461ac8e2a, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).