3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMP8772GQ-Z
MONOLITHIC POWER SYSTEMS · Global Sourcing Parts · QFN-16(3x3)
MP8772GQ-Z from MONOLITHIC POWER SYSTEMS, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; NC must be left floating. |
| 2 | BST | power_out | Bootstrap; connect a capacitor between SW and BST to form a floating supply for the high-side driver, with a BST resistor less than 4.7Ω recommended. |
| 3 | EN | input | Enable; drive EN above 1.25V to turn the regulator on and below 1V to turn it off, and it supports a 17V input range. |
| 4 | FB | input | Feedback; FB sets the output voltage when connected to the tap of an external resistor divider between the output and GND. |
| 5 | AGND | power_in | Signal ground, not connected to the system ground internally, so it must be tied to system ground in the PCB layout. |
| 6 | SS | passive | Soft start; a capacitor across SS and GND sets the soft-start time to avoid start-up inrush current, and SS capacitors below 4.7nF should be avoided. |
| 7 | PG | output | Power good open-drain output that changes state if UVP, OCP, OTP, or OV occurs. |
| 8 | VIN | power_in | Supply voltage; the MP8772 operates from a 3 to 17V input rail and the input rail needs decoupling by a capacitor. |
| 9 | PGND | power_in | System ground; PGND is the reference ground of the regulated output voltage and is recommended to be connected to GND with copper and vias. |
| 10 | PGND | power_in | System ground; PGND is the reference ground of the regulated output voltage and is recommended to be connected to GND with copper and vias. |
| 11 | PGND | power_in | System ground; PGND is the reference ground of the regulated output voltage and is recommended to be connected to GND with copper and vias. |
| 12 | PGND | power_in | System ground; PGND is the reference ground of the regulated output voltage and is recommended to be connected to GND with copper and vias. |
| 13 | PGND | power_in | System ground; PGND is the reference ground of the regulated output voltage and is recommended to be connected to GND with copper and vias. |
| 14 | VCC | power_out | Internal bias supply output that must be decoupled with a 1µF capacitor placed close to VCC and GND. |
| 15 | NC | unconnected | No connection; NC must be left floating. |
| 16 | SW | output | Switch output; connect SW with a wide PCB trace. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MONOLITHIC POWER SYSTEMS |
| Package | QFN-16(3x3) |
| Category | Global Sourcing Parts |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
MP8772GQ-Z - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
mp8772gq-z-etched.step/mp8772gq-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mp8772gq-z.step/mp8772gq-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MONOLITHIC POWER SYSTEMS datasheet, copy hosted by JLCPCB (23 pp, sha256
7f7f22f912dc232f, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).