Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MP8772GQ-Z

MONOLITHIC POWER SYSTEMS · Global Sourcing Parts · QFN-16(3x3)

MP8772GQ-Z from MONOLITHIC POWER SYSTEMS, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection; NC must be left floating.
2 BST power_out Bootstrap; connect a capacitor between SW and BST to form a floating supply for the high-side driver, with a BST resistor less than 4.7Ω recommended.
3 EN input Enable; drive EN above 1.25V to turn the regulator on and below 1V to turn it off, and it supports a 17V input range.
4 FB input Feedback; FB sets the output voltage when connected to the tap of an external resistor divider between the output and GND.
5 AGND power_in Signal ground, not connected to the system ground internally, so it must be tied to system ground in the PCB layout.
6 SS passive Soft start; a capacitor across SS and GND sets the soft-start time to avoid start-up inrush current, and SS capacitors below 4.7nF should be avoided.
7 PG output Power good open-drain output that changes state if UVP, OCP, OTP, or OV occurs.
8 VIN power_in Supply voltage; the MP8772 operates from a 3 to 17V input rail and the input rail needs decoupling by a capacitor.
9 PGND power_in System ground; PGND is the reference ground of the regulated output voltage and is recommended to be connected to GND with copper and vias.
10 PGND power_in System ground; PGND is the reference ground of the regulated output voltage and is recommended to be connected to GND with copper and vias.
11 PGND power_in System ground; PGND is the reference ground of the regulated output voltage and is recommended to be connected to GND with copper and vias.
12 PGND power_in System ground; PGND is the reference ground of the regulated output voltage and is recommended to be connected to GND with copper and vias.
13 PGND power_in System ground; PGND is the reference ground of the regulated output voltage and is recommended to be connected to GND with copper and vias.
14 VCC power_out Internal bias supply output that must be decoupled with a 1µF capacitor placed close to VCC and GND.
15 NC unconnected No connection; NC must be left floating.
16 SW output Switch output; connect SW with a wide PCB trace.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer MONOLITHIC POWER SYSTEMS
Package QFN-16(3x3)
Category Global Sourcing Parts
Pins 17

CAD (KiCad official)

  • Symbol: MP8772GQ-Z
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: mp8772gq-z-etched.step / mp8772gq-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mp8772gq-z.step / mp8772gq-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MONOLITHIC POWER SYSTEMS datasheet, copy hosted by JLCPCB (23 pp, sha256 7f7f22f912dc232f, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF