Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT8336EV#PBF

Analog Devices · DC-DC Converters · LQFN-16(3x3)

LT8336EV#PBF from Analog Devices, in a LQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SYNC/MODE input External synchronization input and mode selection pin selecting Burst, Burst/SSFM, Pulse-Skipping, Pulse-Skipping/SSFM or external clock sync (0.3MHz to 3MHz).
2 RT passive Switching frequency adjustment pin; connect a resistor from RT to GND at Pin 3 and do not leave it open.
3 GND power_in Ground pin; the RT resistor and FB divider return to this pin.
4 FB input Feedback input receiving the voltage from the resistor divider between VOUT and GND, regulated to 1.000V typical.
5 GND power_in Ground pin; connect one 1µF VOUT capacitor between Pin 6 and this pin only to complete the Silent Switcher configuration.
6 VOUT passive Output pin (40V max); connect a 1µF capacitor between this pin and GND at Pin 5 only, placed as close to the IC as possible.
7 VOUT passive Output pin (40V max); connect a matching 1µF capacitor between this pin and GND at Pin 8 only, placed as close to the IC as possible.
8 GND power_in Ground pin; connect the 1µF VOUT capacitor from Pin 7 to this pin only.
9 SW passive Output of the internal power switches; tie Pins 9, 10, 11 together to the inductor and one side of the boost capacitor CBST.
10 SW passive Output of the internal power switches; tie Pins 9, 10, 11 together to the inductor and one side of the boost capacitor CBST.
11 SW passive Output of the internal power switches; tie Pins 9, 10, 11 together to the inductor and one side of the boost capacitor CBST.
12 BST passive Top switch gate driver supply pin; place a 0.1µF capacitor between BST and SW close to the IC.
13 VIN power_in Input supply pin (2.7V to 40V operation) that must be connected to the input of the power stage, the inductor's input terminal.
14 EN/UVLO input Enable and input undervoltage lockout pin with 1.0V typical threshold; below 0.15V VIN current is 0.3µA typical, tie to VIN if unused.
15 INTVCC power_out Internal 3.5V regulator bypass pin; bypass with 1µF or larger low ESR ceramic capacitor to ground and do not load externally.
16 PG output Open-drain power good output (10V max) pulled low when output is more than ±8% outside regulation, EN/UVLO below 1V, INTVCC too low, or thermal shutdown.
17 GND power_in Exposed pad is ground and must be soldered to the PCB ground plane for thermal and electrical performance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LQFN-16(3x3)
Category Power Supply Chip
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Operation Voltage VIN 2.7 40 V full temperature range 2
VIN Quiescent Current (shutdown) IQ 0.3 1 µA EN/UVLO = 0.15V 2
VIN Quiescent Current (shutdown, full temp) IQ 0.3 10 µA EN/UVLO = 0.15V, full operating temperature range 2
VIN Quiescent Current Burst IQ 4 8 µA SYNC/MODE = 0V, Not Switching 2
VIN Quiescent Current Pulse-Skipping IQ 0.9 1.5 mA SYNC/MODE = Open, Not Switching 2
VIN Quiescent Current PassThru IQ 15 25 µA VIN = 10.1V, VOUT = 10V, FB = 1.05V (In PassThru Mode) 2
FB Regulation Voltage E-Grade/H-Grade VFB 0.994 1 1.006 V E-Grade/H-Grade 3
FB Regulation Voltage E-Grade/H-Grade (full temp) VFB 0.985 1 1.01 V E-Grade/H-Grade, full operating temperature range 3
FB Line Regulation 0.005 0.02 %/V 2.7V < VIN < 40V 3
FB Pin Input Current -20 20 nA FB = 1.0V 3
Switching Frequency fSW 1.85 2 2.15 MHz RT = 47.5kΩ, full temperature range 3
Synchronizable Frequency 0.3 3 MHz SYNC/MODE = External Clock 3
SYNC Logic Low 0.4 V SYNC/MODE pin input logic level 3
SYNC Logic High 1.7 V SYNC/MODE pin input logic level 3
EN/UVLO Threshold Voltage Falling 0.94 1 1.06 V 3
EN/UVLO Input Bias Current -40 40 nA EN/UVLO = 2V 3
PG Upper Threshold Offset 5 8 12 % FB Falling 3
PG Lower Threshold Offset -12 -8 -5 % FB Rising 3
PG Leakage Current -40 40 nA PG = 3.5V 3
PG Pull-Down Resistance 700 2000 Ω PG = 0.1V 3
Bottom Switch Current Limit 2.5 3 3.3 A 3
Bottom Switch Minimum Off-time 20 50 ns 3
Bottom Switch Minimum On-time 20 80 ns VIN = 9.5V, VOUT = 10V 3
SW Leakage Current -1.5 1.5 µA VOUT = 40V, SW = 0V, 40V 3
Bottom Switch On-Resistance 70 mΩ ISW = 1A 3
Top Switch On-Resistance 75 mΩ ISW = 1A 3
Soft-Start Time 1.4 ms RT = 47.5kΩ 3
PassThru Top Switch Reverse Current Limit 750 mA VIN = 9.9V, VOUT = 10V, FB = 1.05V (Top Switch Turns Off) 3
VIN, VOUT, EN/UVLO Voltage 40 V 2
SYNC/MODE, FB Voltage 6 V 2
PG Voltage 10 V 2
Operating Junction Temperature Range LT8336E TJ -40 125 °C Notes 2, 3 2
Storage Temperature Range TSTG -65 150 °C 2
Thermal Resistance Junction-Ambient θJA 42.8 °C/W Note 4 2
Thermal Resistance Junction-Case (top) θJCtop 45.2 °C/W Note 4 2
Thermal Resistance Junction-Case (bottom) θJCbottom 8.2 °C/W Note 4 2

CAD (KiCad official)

  • Symbol: LT8336EV#PBF
  • Footprint: Package_DFN_QFN:LQFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: LQFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: lt8336ev-pbf-etched.step / lt8336ev-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8336ev-pbf.step / lt8336ev-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 65b0ead76f1e1165, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF